Crestron CNLCDRFHT-A User manual

CRESTRON CNLCDRFHTA One-Way Wireless Transmitter
REMOTE CONTROL SYSTEMS
1 DOC. 8110
Specifications subject to change without notice.
DESCRIPTION:
Functional Description
The CNLCDRFHTA hand-held one-way wireless radio frequency (RF) transmitter operates with a
CRESNET II control system with the use of a RF receiver (CNRFGWA, network unit).
Physical Description
The transmitterishousedinablack,high-impactmoldedplasticenclosure.Thestandardunitissupplied
withcustomengravedfrontpanelandachoiceofcolored button caps, panel finishes, and button
configurations.Unusedbuttonsareomitted.
LEADING SPECIFICATIONS:
CRESNET II Workshop Version 4.30 or later.
CRESNET II Operating System SR30314.OPS or later.
Dimensions: Height 5.750 in (14.605 cm)
Width 3.580 in (9.093 cm)
Depth 1.140 in (2.896 cm)
Weight: 0.56 lbs (0.254 Kg)

CRESTRON CNLCDRFHTA One-Way Wireless Transmitter
REMOTE CONTROL SYSTEMS
2 DOC. 8110
Specifications subject to change without notice.
PROGRAMMING:
The CNLCDRFHTA contains an LCD display (2 lines x 16 characters) and 32 miniature pushbuttons. The
functionofeachbuttonisprogrammablethroughthe"CNLCDHTProgrammingUtility"(CPU),includedin
theCRESNET II Workshop. Programming requiresaCNLCDP programming module.
The CNLCDHT Programming Utility allows CNLCDRFHTA transmitter buttons 5 through 32 to be defined
as"PageSelect" buttons. When a "Page Select" button is depressed, the LCD displays the "Page" name on
lineone and the four "Soft Key" options on line two. When a "Page" is selected, the "Soft Key", "Pop-Up",
and "Number Entry" keys are redefined as "Select Next Page" or "Select Previous Page" keys. Twenty
uniquepagescan bedefined.
Buttons1 through 4 are defined as "Soft Key" buttons because they have no "hard" engraving. Instead,
each"SoftKey"hasacorrespondingonetofourcharacteridentifieronlinetwooftheLCD.The
CNLCDRFHTAcan be programmed to display the function of each "Soft Key" in relation to the currently
selected"page".When a "Soft Key" is depressed, a user-defined function number is transmitted and the
"Soft Key" text blinks.
Ifanyof the buttons, 5 through 32, are not defined as "Page Select" keys, they may be defined as "Pop-Up"
or "Number Entry" keys. When a "Pop-Up" key is depressed, line two of the display changes to show that
key'suser-defined name and the user-defined transmission codeissent.
When a key defined as a "Number Entry" key is depressed, the user-defined character (0 through 9 or A
throughZ)isdisplayedonlinetwoofthedisplayandatransmissioncodeissent.Ifaseriesof"Number-
Entry" keys are depressed, a list (of user-defined length) of the keys is displayed. Additionally, there is a
"Clear" key definition that clears the list of numbers and sends a defined transmission code. The "Clear"
functioncanbeusedasaclearor"Enter"function.
Any buttons, 5 through 32, which are not defined as "Page Select" keys can have different definitions
dependingon what "Page" is currently selected or they can be defined "globally", allowing the key to
operateinthe same way no matter what "Page" is selected.
FURTHER INQUIRIES:
If after reviewing this Operations Guide you still have additional questions, please contact a CRESTRON
technicalsupport representative in your area by dialing one of the following numbers.
* In the US, call (888) CRESTRON [[phone]] or [phone].
* In Europe, call +32.15.730.974.
* In Asia, call +852.2341.2016.

CRESTRON CNLCDRFHTA One-Way Wireless Transmitter
REMOTE CONTROL SYSTEMS
3 DOC. 8110
Specifications subject to change without notice.
SYNTAX:
Thefollowing syntax codes are provided for compatibility purposes only.
NET.ID <10 to FE>: CNRFGWA \CNLCDRFHTA talking to a CNRFGWA
TRANSMITTER <ID CODE>: CNRFT
i1 = <signal name> \assigned button 1
i2 = <signal name> \assigned button 2
i3 = <signal name> \assigned button 3
" = " "
" = " "