CTEK MXS 5.0 CHECK User manual

5A
5
YEAR
WARRANTY
5
YEAR
WARRANTY
5
YEAR
WARRANTY
5
YEAR
WARRANTY
CTEK MXS 5.0
CHECK
5
YEAR
WARRANTY
5
YEAR
WARRANTY
5
YEAR
WARRANTY
5
YEAR
WARRANTY
COMBINED BATTERY CHARGER
AND BATTERY&ALTERNATOR CHECK
CTEK MXS 5.0 CHECK
CTEK MXS 5.0 CHECK is a unique combination of a battery and
alternator check instrument as well as a new generation battery
charger with exceptional features.
MXS 5.0 CHECK off ers; battery diagnosis, a special reconditioning
option, unique maintenance charging and a option for optimised
charging during cold winter days and charging of demanding AGM
batteries. MXS 5.0 CHECK can be used with both charge options at
the same time. MXS 5.0 CHECK is a fully automatic 8-step charger
that delivers selectable 0.8A or 5A to 12V batteries from 1,2-110Ah
and is suitable for maintenance charging up to 160Ah.
The check instrument is extremely easy to use and consist of three
voltage check programs: BATTERY, START POWER and ALTERNA-
TOR. MXS 5.0 CHECK three voltage check programs works both
with and without 230V supply. The charger is delivered with a
5-year warranty.
TECHNICAL DATA
CHARGING VOLTAGE 14.4/14.7/15.8 V
CHARGING CURRENT Max 5 A
TYPE OF CHARGER 8 step, fully automatic charging cycle,
3 voltage check programs
TYPE OF BATTERY 12 V lead-acid batteries
BATTERY CAPACITY 1.2–110 Ah, up to 160 Ah for maintenance
INSULATION IP65 (splash and dust proof)
AUTO
Fully automatic for optimal charging
For all lead-acid batteries
FULLY CHARGED BATTERY
Maintenance charging
For charging in cold conditions and AGM
batteries
Recondition of deeply discharged batteries
Check battery charge level.
Check battery start power
Check alternator performance

www.ctek.com
5A
CTEK MXS 5.0 CHECK
CTEK MXS 5.0
CHECK
2001XXXXXX 56-XXXX-EN
1 STEP 1 DESULPHATION
2 STEP 2 SOFT START
3 STEP 3 BULK
4 STEP 4 ABSORPTION, READY TO USE
5 STEP 5 ANALYSE
6 STEP 6 RECOND
7 STEP 7 FLOAT, FULLY CHARGED
8 STEP 8 PULSE, MAINTENANCE CHARGING
CTEK’s UNIQUE 8 STEP CHARGING
CTEK COMFORT CONNECT–clamp
CTEK COMFORT CONNECT–eyelet M6
CHARGING
MODE
RECOND 12V/5A
MXS 5.0
1
1
2
3
1. Connect the charger to the battery.
2. Connect the charger to the wall socket.
Power-on lamp lights
3. Press the MODE-button to select charging program.
Small sized batteries
Medium sized batteries
Charging in cold conditions and AGM batteries requir-
ing 14.7 V charging
Reconditioning of deeply discharged batteries
4. … and ready.
1. Press the Mode-button for 2 seconds to select
CHECK VOLTAGE program
2. Choose a VOLTAGE CHECK PROGRAM:
BATTERY: checking the battery performance.
START POWER: checking the battery´s
performance when cranking.
ALTERNATOR: checking the alternator
or generator performance.
3. Check the result:
CHECK BATTERY —12.4V 12.4—12.65V 12.65V—
CHECK START POWER —9.6V 9.6—10.5V 10.5V—
CHECK ALTERNATOR —13.3V 13.3—14.0V 14.0V—
• Unique 3 voltage check programs
• The 3 voltage check programs works both with and without
230V-supply
• Multi combination modes for selectable options for all programs.
• Fully automatic charging and maintenance in 8 steps
maximizes battery life and performance
• Numerous accessories simplifies using the same charger
for multiple batteries
• One charger for the car, motorcycle, lawn mower, snowmobile,
and tractor
• Water-resistant so that the solution could be taken to the problem
even if it rains or snows
• Patented maintenance charge for a unique combination
of maximized life and performance
• Recondition of deep discharged batteries
• Patented desulphation that extends the battery life
• No sparks, short-circuit proof and reverse-polarity protected
for untroubled usage
• Automatic detection of end-of-life batteries that eliminates surprises
CHECKING
BAD FAIR OK