CyberData VoIP Intercom 010935B Manual

Installation Quick Reference
VoIP Intercom
SiP Compliant
010935B
Quick Reference 930180E © 2008, CyberData Corporation, ALL RIGHTS RESERVED© 2008, CyberData Corporation, ALL RIGHTS RESERVED 930180E Quick Reference
Intercom Connections
Contacting CyberData
1
2
3
4
Alternate Power Input:
1 = +5V at 1000 mA
2 = Power Ground
Relay Contact:
(2A at 30 VDC or 0.4A at 125 VAC
for continuous loads)
3 = Normally Open Common
4 = Normally Open Contact
5 = Door Sense Input
6 = Door Sense Ground Reference
J3 - Terminal Block
-
-
Wire in,
accept wire range
from 16-26 AWG
34
5
6
V2 Hardware
Corporate Headquarters
CyberData Corporation
2555 Garden Road
Monterey, CA 93940, USA
Phone: [phone]
Fax: [phone]
www.CyberData.net
Sales: [phone] ext. 334
Support: 831-373-2601 ext. 333
Email: [email protected]t
RMA Dept: [phone] ext. 136
Email: [email protected]
Warranty
CyberData warrants its product against defects in material and
workmanship for a period of two years from the date of purchase.
Should the product fail within the warranty period, CyberData will
repair or replace the product free of charge. This warranty includes all
parts and labor. Should the product fail out-of-warranty, a flat rate
repair charge of one half the purchase price will be assessed. Repair
costs for products that are in warranty, but damaged by improper
modifications or abuse, are charged at the out-of-warranty rate.
Products returned to CyberData, both in and out-of-warranty, are
shipped to CyberData at the customer’s expense. Charges for
shipping repaired products to the customer are paid by CyberData.
For product service, contact the Returned Materials Authorization
(RMA) department. A product will not be accepted for return without
an approved RMA number. Send the product, in its original package,
to: CyberData Corporation, 2555 Garden Road, Monterey, CA 93940,
Attention: RMA “your RMA number”
The Voice-over-IP (VoIP) Intercom is a SIP endpoint designed to provide VoIP phone connectivity in a tamper proof and
secure package.
Typical Intercom System Installation
Getting Started
●Download the VoIP Intercom Operations Guide, a PDF file, at: http://www.cyberdata.net/support/voip/intercom.html or
go to www.CyberData.net- >Support->Drivers, Utilities, & Manuals-> Product Drivers & Documentation page-
>VoIP Intercom.
●Create a plan for the locations of your Intercoms.
●Prior to installation, consult local building and electrical code requirements.
●WARNING: This enclosure is not rated for any AC voltages!
Intercom Parts
Parameter Factory Default Setting
IP Addressing static
IP Address 192.168.3.10
Web Access Username admin
Web Access Password admin
Subnet Mask 255.255.255.0
Default Gateway 192.168.3.1
802.3af Compliant Ethernet Hub
VoIP Phone SIP Server
VoIP Intercoms
(1) Intercom Assembly
(2) 8-32 x 1/4" Flat head
phillips machine screw
(1) 10-24 x 5/16" Pan head
phillips machine screw
(1) Wall Mounting Kit
(2) Outlet box plugs
(2) Flush mounting plate

© 2008, CyberData Corporation, ALL RIGHTS RESERVED 930180E Quick Reference Quick Reference 930180E © 2008, CyberData Corporation, ALL RIGHTS RESERVED
Cable Entries and Conduit Restrictions
The VoIP Intercom has three possible cable entries. If you are using the center entry, refer to the drawing on the right that
shows the entry restrictions.
Mounting and Screws
OR
CONDUIT
HOLE PLUG
(1/2”)
Not to Exceed 0.1"
CONDUIT
1/2"
Mounting Screw
Not Provided
Plate (2 x)
Flush Mounting
Flat Head Phillips
Machine Screw (2 x)
Intercom Assembly
To mount the intercom, use methods compliant with local electrical codes.
Intercom Dimensions
Mounting
Face Plate
2 Gang Box
and
PCB Assembly
Screw (4x)
2.3 [59]
5.0 [127]
5.0 [127]
inches [millimeter]