Dakota Digital VHX-68O-CUT User manual

Manual # 650648
VHX-68O-CUT
Dakota Digital VHX Instrument Installation
For 1968-`69 Oldsmobile Cutlass
Your new VHX-68O-CUT kit includes:
Installation
Installation Manuals
Control Box
(2) 36” CAT5 Cable
(1) 12” CAT5 Cable
Universal Sender Pack
VHX Display
1. First, remove the stock gauges from the dash by removing the two (2) mounting screws on the back
side of each gauge. Retain all factory hardware for reassembly.
Switch Assembly

Manual # 650648
2. Remove each of the three (3) factory gauge bezels and mount them to the VHX system using the
four (4) original screws per gauge.
4. With the provided CAT5 cables, attach one end of the provided 36” CAT5 cables to both the back of
the VHX system speed and the back of the tach gauge with the other ends carefully routed to the
control box mounting location. One end of the 12” CAT5 cable goes to the speed and the other end
to the quad.
To Control Box
To Control Box
tach
speed
quad
3. Mount the VHX system to the stock dash using the stock screws from disassembly.
tach
speed
quad

Manual # 650648
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
5. Refer to the main manual for wiring instructions to complete the VHX installation.