Dancover AC120070 User manual

for
Ventilation Window for
TITAN Peak 240/360
and
TITAN Arch 196
Manual
11-02-2020

23
Technical certificate Technical certificate
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
The vent sash is designed to ventilate the greenhouses. It is installed only in the
greenhouses TITAN Peak 240/360 and TITAN Arch 196. The frame of the vent sash is
made of galvanized steel and it is assembled with screws and nuts. The complete set
includes everything you need to mount and to cover.
Follow the greenhouse vent sash assembly instructions and use it in strict
accordance with the manual and operating rules stated in the technical
certificate. Please keep the technical certificate for further reference.
DISCRIPTION
INTRODUCTION
The air draught and air access are needed to ventilate the greenhouse. The plenum
system of air supply should provide fresh outdoor air at a steady pace around the
greenhouse. The inflow ventilation window apertures are at the low altitude from the
ground. The exhaust ventilation window apertures are at the top of the greenhouse,
or above the inflow ventilation window apertures, or side walls of the greenhouse - for
the forced extraction using electric fans.
The most effective and comfortable way of ventilation is the variant when the inflow
ventilation window apertures are situated low, and the exhaust ventilation window
apertures are at the top part of the side walls. The final choice of ventilation options
is left to the buyer. The automatic hinge arm or sash lock handle are sold separately.
They are not standard included.
1 - arc-wall vent sash
2 - flat vent sash
The locations of the vent sashes in the greenhouses are shown in the figures.
Any necessary vent sash is conformed to a buyer.
TITAN Peak 360 3,5
3,19 2,96 3,56
3,82
3,75
2,72 2,48 3,20
3,20
2,20 2,03 2,73
2,73
1,53 1,44 1,52
1,52
2,15
2,15
0,92 0,83 0,80
0,80
0 м 0 м 0 м
0 м
TITAN Peak 240 4,2 TITAN Peak 240 5,0
TITAN Arch 196 7,5
Arc-wall vent sash
marking name quantity (pcs) dimension (mm)
1st package
01ф vent sash elevation 2 501
02ф clamp band 2 880
03ф little diagonal 1 878
04ф main diagonal 1 947
05ф guide 2 681
right bracket 1 675
left bracket 1 675
fixed part of lift-off butt 2 25х40
moving part of lift-off butt 2 104х35х40
curtain rail 1 1102
2nd package
Bolt 6х14 12
Bolt 6х20 15
screw М5х10 26
screw М5x35 12
screw М5х45 2
Nut М5 38
jam nut M5 2
Nut М6 27
Washer 32х5 12
Washer 32х6 9
double-size scotch tape 1 1100
3rd package
uppermost packing 1 1017
downmost packing 1 975
upright packing 2 687
4th package
polycarbonate 1 1050х705
THE LOCATION OF THE VENT SASHES IN THE
GREENHOUSES TITAN Peak 240/360 and TITAN Arch 196

45
Technical certificate
Flat vent sash
marking name quantity (pcs) dimension (mm)
1st package
01ф/3 vent sash elevation 2 501
02ф clamp band 2 880
03ф little diagonal 1 878
04ф main diagonal 1 947
05ф/3 guide 2 674
right bracket 1 675
left bracket 1 675
fixed part of lift-off butt 2 25х40
moving part of lift-off butt 2 104х35х40
curtain rail 1 1102
2nd package
Bolt 6х14 12
Bolt 6х20 15
screw М5х10 26
screw М5x35 12
screw М5х45 2
Nut М5 38
jam nut M5 2
Nut М6 27
Washer 32х5 12
Washer 32х6 9
double-size scotch tape 1 1100
3rd package
uppermost packing 1 1017
downmost packing 1 975
upright packing 2 687
4th package
polycarbonate 1 1050х705
Operating rules
Warranty liability
1. The manufacturer bears responsibility for the vent
sash complete setup.
2. The manufacturer bears responsibility for the vent
sash assemblability in accordance with the manual.
3. Claim submission period is 12 months from the
date of the purchase.
Warranty conditions
Warranty liabilities do not apply to the cases of:
1. the vent sash installation with the contrary to the
manual,
2. misuse,
3. hurricanes and other natural disasters.
The manufacturer reserves the right for the vent sash engineering design changes.
The vent sash should be framed and
installed in a greenhouse according the
manual before the exploitation.
The vent sash should not be damaged. Any
blemishes deform the frame and overcoat of
the greenhouse.

67
Fig.1
Fig.2
manual
Assembly instruction
1.
2.
Determine the place of the vent sash.
Install two guides 05ф (fig.1) in the
chosen place. The guides 05ф are
installed on the beams in the pre-
drilled holes of the greenhouse.
Cut the window aperture (fig.1) for the
vent sash on the edges of the profile.
Tape the top and bottom cuts of the
polycarbonate.
Drill 4 holes Ø7 in the beams (fig. 1).
Install right and left brackets on them. (fig.2), observing
their position on the holes
964
498 7
48
cutting line
right bracket left bracket
05ф
05ф
outside view
12...14
12...14
12...14
12...14
manual
Assembly instruction
Cut both edges of the uppermost packing and
lower edges of upright packing after the edges
of the aperture (fig.3)
3.
Fig.3
upright packing
upright packing
downmost
packing
downmost
packing
uppermost
packing
20мм
20мм
uppermost
packing

89
Assembly instruction
manual
Drill 5 holes Ø∅7 along the axis of the lower beam and 6 holes on the
top beam at 7 mm. distance from the edge. Install the packing on the
polycarbonate edges. Bolt the edges of the polycarbonate outline with the
bolts M6*20 and a washer 32*6 (fig. 4) to the runners and a lower beam.
Install the curtain rail on the top beam.
4.
Fig.4
05ф
polycarbonate
washer 32х6
bolt М6х20
jointing shape
jointing shape
manual
Assembly instruction
5. Frame the vent sash using the details 01ф, 02ф, 03ф, 04ф. Install the
window butt on the vent sash with the screws M5*10 and nuts M5.
Fig.5
01ф
01ф 01ф
01ф
04ф
04ф
04ф
03ф
03ф
03ф
02ф
02ф 02ф
02ф
02ф
02ф
screw М5х45
fixed part of lift-off
butt jam nut M5
moving part of lift-off
butt
curtain rail
7мм
double-size
scotch tape

10 11
manual
7. Fit the vent sash to the
window aperture, mark
the holes for the lift-off
butts and then drill 4
holes on the beam
(fig. 7)
polycarbonate
binding rafter 2
joining shape
Fig.7
Assembly instruction
vent sash
washer 32х5
screw М5х35
lift-off butt
16 мм
02ф
01ф
04ф
6. A polycarbonate piece tape with scotch
(close the cells) and screw it to the frame of
the vent sash with the screws M5*35 and
nuts M5 (fig.6)
Fig.6
polycarbonat
lift-off butt
places of
fastening
polycarbonate
Do not screw until tight in order not
to damage the polycarbonate
60
curtain rail

Contact information
Head office:
Dancover A/S
Nordre Strandvej 119 G
3150 Hellebæk
Denmark
For more information
please visit:
www.dancovershop.com
National contact
Denmark: 70 26 76 20
[e-mail]
UK: 020 8099 7570
[e-mail]
Spain: 911 436 828
[e-mail]
Italy: 02 479 21 198
[e-mail]
Germany: 041 0266 7040
[e-mail]
Switzerland: 0840 000125
[e-mail]
France: 0975 181 800
[e-mail]
Austria: 0662 626935
[e-mail]
Sweden: 040 233 262
[e-mail]
Finland: 0 931 581 720
[e-mail]
Nederland: 0 858 880 524
[e-mail]
Poland: 22 300 8602
[e-mail]
Ireland: 0 151 33 003
[e-mail]
Luxembourg: [phone]
[e-mail]
Portugal: 308 800 899
[e-mail]
Belgium: 0 28 08 08 09
[e-mail]
Norway: 231 00 690
[e-mail]