Dancover ASTRA GH120150 User manual

15-01-2021
for
Mini Greenhouse ASTRA
Manual

0,89 m
1,75 m
0,8 m
0,34 m

3
2
Description
The “ASTRA” greenhouse is designed to create a favorable microclimate for growing
garden crops in allotments and family gardens.
The frame of the greenhouse is made of galvanized steel pipes and galvanized
steel profile sheets. It is assembled with screws, nuts, and self-tapping screws. The
kit comprises everything you need for fixing the glazing. The height of the installed
greenhouse is 82 cm from the ground level, the posts are sunk into soil by 25 cm.
Upon placing the assembled greenhouse on the installation site, sink the angle posts
into the soil making sure that your greenhouse is level and square.
The assembly and operation of the “ASTRA” greenhouse should be carried
out strictly in accordance with the instructions and operating rules set forth
in the technical certificate. The technical certificate should be kept
!
Operating rules
Before starting the operation, the greenhouse should be assembled and installed
according to the instructions. When the greenhouse is installed by third parties, the
buyer should check the assembly quality for compliance with the instructions.
Do not install the greenhouse close to buildings and trees from which snow or ice
may fall. The distance of at least 2 m is recommended.
The greenhouse is designed to withstand the wind speed no more than 24 m/s.
It is not necessary to remove the greenhouse glazing for winter, it is required to
keep the greenhouse open and to slide the inner lid under the outer one.
Warranty liabilities
1. The manufacturer is responsible for the completeness of the product.
2. The manufacturer is responsible for assemblability of the greenhouse in accordance with
the instructions.
3. The manufacturer is responsible for the greenhouse durability in the specied weather
conditions.
4. Term for making claims is 24 months from the day of purchase
Terms of warranty provisions
Cleaning and washing sheets of polycarbonate
Warranty does not apply to cases of:
1. Greenhouse installation in violation of instruction requirements
2. Violation of the rules of operation.
3. Inappropriate use of the greenhouse.
4. Deformation of the greenhouse as a result of ground movement.
5. Floods, hurricanes and other natural disasters.
1. Rinse the sheet with warm water.
2. Wash the sheet with a solution of mild soap or with a household detergent and
warm water, using a soft rag or a sponge to remove dirt.
3. Rinse with cold water and wipe with a soft cloth.
Never use abrasives or highly alkaline cleaning compositions for cleaning
polycarbonate sheets. Dry rubbing of the surface will damage the protective layer of the
cladding and shorten its shelf life. Never rub the surface of polycarbonate sheets with
brushes, metallic cloth or other abrasive materials.
When disinfecting the greenhouse from pathogens causing fungal and bacterial
diseases, do not use «sulfur blocks» to avoid frame corrosion (blackening).
Technical certificate/GREENHOUSE «ASTRA» Technical certificate/GREENHOUSE «ASTRA»
The company reserves the right to make changes in the greenhouse design

5
4
List of equipment for “ASTRA” greenhouse
№ view denomination length,
m
q-ty, pc.
23 M4x35 screw 4
24 М6х25 screw 20
25 М4 nut 4
26 М6 nut 4
27 Handle 2
28 3.5x9.5 self-tapping screw 48
29 4.8x19 self drilling screw 76
30 4.8x19 self drilling screw 18
31 Lock washer 8
32 Washer 6 4
33 Rubber bushing 2
4 package
34 Lid seal 1,75 2
35 Lid seal 0,47 2
36 Inner lid seal 0,4 2
37 Seal between the lids 1,69 1
38 Seal between the lids 0,44 2
Polycarbonate
39 Outer lid polycarbonate
1,75
х
0,76
1
40 Outer lid sidewall
polycarbonate
0,47
х
0,47
2
41 Inner lid polycarbonate
1,7
х
0,7
1
42 Inner lid sidewall
polycarbonate
0,44
х
0,44
2
List of equipment for “ASTRA” greenhouse
№ marking view denomination length, m q-ty, pc.
1 package
12Longitudinal board
1,75 4
21Transversal right board 0,8 2
31-1 Transversal left board 0,8 2
419 Angle bead 0,6 4
517 Inner purlin for handle 1,64 1
612 Inner purlin 1,64 1
75Purlin for handle 1,7 1
83Purlin 1,7 1
98Large arc right radius 0,47 1
10 8-1 Large arc left radius 0,47 1
11 11 Small arc right radius 0,44 1
12 11-1 Small arc left radius 0,44 1
13 7Large arc vertical radius 0,45 2
14 10 Small arc vertical radius 0,42 2
15 -Side angle for
polycarbonate
0,88 4
16 -Side angle for
polycarbonate 0,85 4
17 -Angle for polycarbonate
outer lid 0,45 2
2 package
18 6Large arc 0,7 2
19 9Small arc 0,64 2
3 package
20 -Plate 2
21 -Axis 4
22 -M6x14 bolt 4D
B
A
С

7
6
1
2 pc.
№1 from
«1 package»
2pc.
№1 from
«1 package»
2
2
2
2
1
1
1-1
1-1
2
2
2
2
1-1
1-1
1-1
2
2
1
1
1-1
1-1
1
1
1
2
2
1 pc.
№4 from
«1 package»
1 pc.
№4 from
«1 package»
12 pc.
№28 from
«3 package»
1 pc.
№4 from
«1 package»
12 pc.
№28 from
«3 package»
12 pc.
№28 from
«3 package»
12 pc.
№28 from
«3 package»
2 pc.
№3 from
«1 package»
1 pc.
№4 from
«1 package»
1 pc.
№20 from
«3 package»
2 pc.
№22 from
«3 package»
2 pc.
№26 from
«3 package» 2 pc.
№32 from
«3 package»
1 pc.
№20 from
«3 package»
2 pc.
№22 from
«3 package»
2 pc.
№32 from
«3 package»
2 pc.
№26 from
«3 package»
19
19
19
19
19
19
2pc.
№2 from
«1 package»

9
8
23
3
5
6
6
7
7
8-1
8
3
6
7
7
8
8
6
5
9
12
10
9
17
11-1
11-1
10
10
11-1
9
12 17
9
10
11
517
2 pc.
№24 from
«3 package»
1 pc.
№24 from
«3 package»
2 pc.
№24 from
«3 package»
2 pc.
№18 from
«2 package»
1 pc.
№8 from
«1 package»
2 pc.
№24 from
«3 package»
1 pc.
№7 from
«1 package»
1 pc.
№10 from
«1 package»
2 pc.
№13 from
«1 package»
1 pc.
№24 from
«3 package»
2 pc.
№24 from
«3 package»
2 pc.
№14 from
«1 package»
2 pc.
№19 from
«2 package»
1 pc.
№9 from
«1 package»
1 pc.
№12 from
«1 package»
1 pc.
№6 from
«1 package»
1 pc.
№5 from
«1 package»
1 pc.
№11 from
«1 package»

11
10
46
C
D
D
5
L2
L1
L1=L2
!
12
17
9
9
11-1
11
10
10
10
11-1
10
11
1 pc.
№21 from
«3 package» 1 pc.
№31 from
«3 package»
1 pc.
№31 from
«3 package»
1 pc.
№21 from
«3 package»
12
17
10
11-1
11 pc.
№29 from
«3 package»
0,44 m
№38 from
«4 package»
2 pc.
№16 from
«1 package»
6 pc.
№29 from
«3 package» 2 pc.
№31 from
«3 package»
0,4 m
№36 from
«4 package»
1 pc.
№33 from
«3 package»
1 pc.
№21 from
«3 package»
2 pc.
№16 from
«1 package»
1,69 m
№37 from
«4 package»
8 pc.
№30 from
«3 package»
5 pc.
№30 from
«3 package»
1.75 m
№34 from
«4 package»

13
12
78
5
3
6
6
7
7
8
8-1
1 pc.
№31 from
«3 package»
1 pc.
№31 from
«3 package» 8-1
8
7
7A
B
B
0,47 m
№35 из
«4 package» 1,75 m
№34 из
«4 package»
3
12
1 pc.
№17 из
«1 package»
46 pc.
№29 из
«3 package»
710
8
5
2 pc.
№15 from
«1 package»
2pc.
№15 из
«1 package»
1 pc.
№17 из
«1 package»

15
14
9
1 pc.
№27 from
«3 package»
2 pc.
№23 from
«3 package»
2 pc.
№25 from
«3 package»
1 pc.
№27 from
«3 package»
2 pc.
№25 from
«3 package»
2 pc.
№23 from
«3 package»
10

I
For more information
please visit:
www.dancovershop.com
l
l
l
l
l
l
l
l
l
l
l
Dancover A/S
Lyngevej 16A, Nørre Herlev
3400 Hillerød
Denmark
Head office: