Darco Body Armor Night Splint User manual

5
1
2
3
4
Slide foot into the night
splint, seating the heel
snugly in the heel opening.
Tighten, as needed, both
sides of the foot strap
together.
Tighten, as needed, both
sides of the heel strap
together.
Thread the calf strap.
Tighten, as needed, both
sides of the calf strap
together.
Insert the big toe in the
toe loop. The top of the
toe should be level with
the end of the toe loop.
Body Armor® Night Splint Instructions

6
Using the elastic ring,
place the big toe in a
neutral or slightly elevated
position* and attach the
ring to one of the hooks.
7
Secure the toe loop tab to
the bottom of the night
splint.
Cleaning Instructions:
• Remove softgoods by unfastening all six hook and loop closures.
• The shell and padding may be cleaned by wiping with a damp cloth.
• The softgoods and toe loop may be hand washed in mild detergent or soap
and air dried.
• DO NOT use solvents to clean product.
Contraindication for Use:
• Plantar flexion contracture greater than 10˚.
• Uncontrollable severe plantar flexion spasticity.
• This product is not intended for extended periods of weight bearing or
ambulation.
Attention: Use this product only under the guidance of a physician or certified
medical professional. This device is intended for rehabilitative purposes, only as
directed by your physician. If you experience any pain, swelling, sensation changes,
or any unusual reaction while using this product, discontinue use and contact your
physician immediately.
Instructions continued
MADE IN CHINA
Patent Pending
810 Memorial Blvd. | Huntington, WV 25701 | USA
800-999-8866 | [e-mail]
* As treatment continues, the
toe may be elevated as comfort
allows to permit a greater stretch
to the Plantar Fascia. If you
experience any numbness or
discomfort of the big toe, reduce
tension on the toe strap to a
more neutral position. Should
discomfort or numbness persist,
discontinue use and consult your
physician.