DAXYS GRIZZLY User manual

USER MANUAL v1.0
GRIZZLY
Electric Motorbike

GRIZZLY USER MANUAL
Please read this manual very carefully before using the product. The
manual contains important instructions for the safe use and longevity
of your bike.

1
DAXYS GRIZZLY - USER MANUAL
CONTENTS
Riding Introduction .......................................................................................................................................... 2
Safety Information ........................................................................................................................................... 2
Statement of Responsibility............................................................................................................................. 3
Product Disclaimer.......................................................................................................................................... 3
Before You Ride............................................................................................................................................... 4
Battery Disposal.............................................................................................................................................. 5
Meet Your Bike ................................................................................................................................................ 6
Display Guide.................................................................................................................................................. 7
Handlebar Guide ............................................................................................................................................. 8
Product Specifications .................................................................................................................................... 9
Assembly Instructions ....................................................................................................................................11
Charging The Battery .................................................................................................................................... 18
Battery and Charger Information.................................................................................................................... 19
Operating Your Bike....................................................................................................................................... 20
Guide to Electric Pedal Assistance Modes..................................................................................................... 22
Your eBike Keys............................................................................................................................................. 22
Maintenance
Tyres.......................................................................................................................................................... 23
Cleaning Your e bike ................................................................................................................................... 23
Troubleshooting ............................................................................................................................................ 24
F.A.Q’s .......................................................................................................................................................... 25
Warranty........................................................................................................................................................ 26
Technical Support Contact information .......................................................................................................... 27

2
RIDING INTRODUCTION
Do not use the product before carefully reading the instructions and understanding the performance of the product;
Before cycling, check whether the brakes work. When braking, please brake rear first and then front. Pay attention to
the brake tightness. If the brake is too loose, use an Allen wrench to tighten it. Pay attention to increase the braking
distance when riding in rain and snow. Applicable age: 16 ~ 65 years old. Please wear safety helmets and obey the
traffic rules when cycling. It is not allowed to drive in motor lanes and roads with more pedestrians. Please check the
tyre pressure before cycling. The recommended tyre pressure is 20 (max) PSI. When using the motor, pay attention
not to hit it vigorously and keep the rotating shaft lubricated. The maximum load is 200kg.
SAFETY INFORMATION:
ALWAYS WEAR A HELMET AND SAFETY
EQUIPMENT
Helmets significantly reduce the number and severity of
head injuries. Always wear a helmet that complies with
your state laws when riding your eBike. Make yourself
more visible by wearing bright reflective clothing. Keep
your reflectors clean and properly aligned. Use head
and tail lights in reduced lighting conditions. Wear sturdy
shoes and eye protection. Also check your state laws
concerning other protective gear that may be required
when riding your eBike.
KNOW YOUR EBIKE
Your new eBike incorporates many features and
functions that you may be unfamiliar with. Read this
manual thoroughly to understand how those features
enhance your riding pleasure and safety.
RIDE WITHIN YOUR LIMITS
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety. Not
to be used by children without adult supervision.
Take it slow until you are familiar with the riding conditions, as traction can
be greatly reduced and brakes become less effective. Never ride faster than
conditions warrant or beyond your riding abilities. Remember that fatigue, and
inattention can significantly reduce your ability to make good judgments and
ride safely.
KEEP YOUR EBIKE IN SAFE CONDITIONS
For your safety and enjoyment, and to ensure a long life for your eBike,
inspect and maintain your eBike regularly.
Follow the inspection and maintenance guidelines throughout this manual.
Check critical safety equipment before each and every ride.

3
DAXYS GRIZZLY - USER MANUAL
STATEMENT OF RESPONSIBILITY:
After riding, please store in a place without direct sunlight and away from rain; Check the motor and brakes
frequently; Regularly check the screws of the eBike and the places to be tightened, and tighten them regularly.
The front and rear wheels of the vehicle shall be located at the center of the front fork or frame; Frequently
check whether there are scars, cracks or excessive wear in the rotation. The inner tube and air nozzle should be
perpendicular to the wheel hub and should not be tilted. Damage or excessive worn outer tyres needs to be replaced
immediately. Please find a professional technician to replace your outer tyre. If your outer tyre accidentally punctures
and leaks, please contact a professional technician to repair or replace it.
PRODUCT DISCLAIMER:
The contents of the user manual shall not be copied, modified, reproduced, transmitted or published in any form with-
out the prior written permission of the company.
Please read this manual carefully before using the product and operate in accordance with it, otherwise, the company
will not be responsible for product damage or personal and property losses caused by improper and wrong use.
The company reserves the right to modify and finally interpret the product models, specifications or relevant
information mentioned in this manual; The functions of the specific model mentioned in this manual are only
applicable to the specific model; The product models, specifications or relevant information mentioned in this manual
are subject to any modification or change without notice; Please read this manual carefully before using the product
and operate in accordance with it. Otherwise, the company will not be responsible for product damage or personal
and property losses caused by improper and wrong use.

4
BEFORE YOU RIDE
Perform Regular checks and maintenance as outlined below
COMPONENT OR
CONDITION
INSPECT BEFORE
EVERY RIDE
INSPECT
PERIODICALLY
CLEAND AND/OR
LUBRICATE
ADJUST /
TIGHTEN
REPAIR /
REPLACE
(IF NECESSARY)
Tyre presure
Tyre wear/damage
Brake pad
adjustment
Wheel quick
release adjustment
Head and tail lights
Controls and
displays
Seat post quick
release adjustment
Brake pad wear
Brake cable
tension wear
Spoke tension
Wheel true /
Alignment
Hub bearings
Chain lubrication
Derailleur
adjustment
Reflectors
Battery and
charger
All bolts, nuts &
mounting hardware

5
DAXYS GRIZZLY - USER MANUAL
BATTERY DISPOSAL
According to directive AS/NZS 5139:2019 (Safety of battery systems for use with power conversion
equipment) and AS IEC 62619:2017 (Secondary cells and batteries containing alkaline or other
non-acid electrolytes), defective or used batteries, battery packs or single cells must be collected sepa-
rately and disposed of in an environmentally friendly manner.
Used cells and batteries are recyclable economic goods. In accordance with the marking showing a
crossed-out waste bin, these batteries may not be disposed of as domestic waste.
NOTICE:
• Used batteries must be treated as hazardous waste.
• Batteries must be disposed of in accordance with the relevant national environmental protection
regulations.
• Return batteries to a recycling facility, or an authorised Daxys dealer.
• In case of uncertainty contact Daxys customer service department.

6
MEET YOUR BIKE:
14. Wheel rim
15. Tube storage battery
16. Crankset
17. Pedal
18. Seat adjustment quick release
19. Chain
20. Rear derailleur
21. Gear cassette (5 speeds/gears)
22. Drive motor
23. Rear brake caliper
24. Rear shock absorber
25. Stoplight
26. Seat tube
27. Seat
1. Stem
2. Controller
3. LCD display
4. Rear gear switch
5. Brake lever
6. Throttle and handle
7. Headlight supports
8. Headlight
9. Shock-absorbing front fork
10. Tyres
11. Brake disc
12. Brake caliper
13. Front wheel axle nut
1 2
151617181920
21
22
23
24
25
3
4
5
6
7
8
9
10
11
12
13
14
26
27

7
DAXYS GRIZZLY - USER MANUAL
DISPLAY GUIDE:
1. Battery level
2. Headlight (ON if visible)
3. Error warning
4. Current speed / Error code(see page 24)
5. Mph / Kmh
6. PAS level (gear 0-5. See pages 20-21)
7. Walk mode indicator ( ),Total mileage (ODO), Trip distance (TRIP), Max speed (MAXS), Average speed (AVG)
8. Numerical value for selected indicator at no. 7
9. WhAhV (Watt/hour; Amper/hour; Voltage) /Mile / Km indicator
1
3
4
5
6
7
8
9
2

8
HANDLEBAR GUIDE:
13
4
6
7
8
9
11
13
12
10
14
10. Horn
11. Back brake lever
12. On Off button
13. Turn signal
14. Controller
15. LCD display
1. Handlebar
2. Other Shifter (Lower Gear)
3. Main Shifter (Upper Gear)
4. Throttle
5. Handlebar grip
6. Front brake lever
7. Stem cap
8. Suspension damping switch
9. Stem rotation bolts
2
5
15

9
DAXYS GRIZZLY - USER MANUAL
PRODUCT SPECIFICATIONS:
Parameter Value
Appearance Dimension Body material Aluminum alloy
Vehicle colour Black
Bike size Length*width*height:
1700mm*670mm*1080mm
Hub form Spoke wheel
Hub size 20”
Package size Length*width*height:
1400mm*320mm*870mm
Performance Parameters Gross / net weight 36kgs/44kgs
Maximum payload 200kg
Top speed 55Km/h
Endurance Mileage 50-80KM (the lower value is closer to real-life performance)
Maximum climbing angle 25 degree
Service temperature range -10~+45° C
Charger Parameters Input AC 100-240V, 50-60 Hz, 2 A MAX
Output DC 54.6V 2A 110W MAX
Battery parameters Battery type 18650 Lithium ion power battery
Battery capacity 20Ah
Battery rated voltage 48V
Under-voltage protection value 40V
Over-current protection value 15±1 A
Charging time 9-10h

10
Parameter Value
Electrical Specifications Motor mode Moped
Motor type 20”/48V/High speed gear / spoke wheel motor
Motor rated power 1000W (Standard)
Product Features Instrument display Multi-functional color LCD screen
Front lighting Yes
Brakes Front and rear hydraulic disc brakes
Tyre style Pneumatic tyre
Tyre size specification 20x4”
Air nozzle: The inner tube valve is AV
Front fork suspension Yes
Middle(rear)shock absorption Yes
Speed gear 7 Speed
Headlights Yes
DISCLAIMER:
THE PRODUCT WAS TESTED FULLY CHARGED, WITH AN AVERAGE LOAD OF 75KG-85KG, AT A NORMAL TEMPERATURE ON A NORMAL
PAVED ROAD BETWEEN THE SPEEDS OF 0-25KM/H. THE RESULTS MAY VARY BASED ON DIFFERENCES IN TEMPERATURE, LOAD, WIND
SPEED, ROAD CONDITIONS AND OTHER FACTORS.

11
DAXYS GRIZZLY - USER MANUAL
ASSEMBLY INSTRUCTIONS:
1. Unpack your new Daxys Grizzly eBike. 2. Have the tools and parts ready.
3.Remove packing materials.
* Be careful not to scratch the paint
4. Remove front wheel.
*Be careful not to cut the tyre
1. UNBOXING & TOOLS

12
2. FRONT BRAKE INSTALLATION
2. Remove the screw socket protectors from the front wheel fork.
3. Unscrew bolt A completely. This will give you access to bolt B,
which is the first one to tighten in slot 2, then bolt A in slot 1.
4. Tighten bolt B (see image 2) as much as possible.
5. TIghten bolt A (see image 2) as much as possible. 6. Secure the brake cable on the fork with the cable bracket.
1. Turn the bike upside-down.

13
DAXYS GRIZZLY - USER MANUAL
3. Remove the fork protector. 4. Loosen the wheel bolts.
5.Place it in its socket, making sure the washer is on the outside. 6. Tighten the axle nuts.
3. FRONT WHEEL INSTALLATION
1. Remove the plastic brake pads protection spacer. 2. Flip your Grizzly upside down.

14
1. Spin the wheel and listen for rubbing sounds. 2. Loosen A, B with the allen key and adjust brake pads.
3. Spin the wheel to check. 4. Tighten A, B.
4. BRAKE ADJUSTMENT
2. Pull out the battery
5. BATTERY REMOVAL
1. Unlock the battery using the keys (see page 20)

15
DAXYS GRIZZLY - USER MANUAL
1. Remove the screw to separate A and B. 2. Place the anti-skid rubber bands on the inside of the brackets.
3. Place the brackets on the forks and tighten the bolts with a
Philips head screwdriver.
4. Insert the front light and tighten the screws.
* Make sure to place the cables between the frontlight and fork tube
6. FRONTLIGHT INSTALLATION
5. Connect the headlight cable to the the battery cable, paying
attention to match the arrows on each end.

16
1. Loosen the bolts 1-4 and remove stem cover. 2. Loosen the display screws, and rotate it, for easier access.
3. Place handlebar in stem and screw the bolts in, to about 90%. 4. Adjust handlebar to the desired position and tighten the 4 bolts.
* It is recommended to angle the brake handles at aprox. 45°.
7. HANDLEBAR INSTALLATION
5. Tighten the display bolts.

17
DAXYS GRIZZLY - USER MANUAL
1. Flip the bike in the normal position. 2. Identify Left (WL) & Right (WR) pedals.
3. Screw in “R” pedal in a clockwise motion then tighten with
the provided multi-tool.
4. Screw in “L” pedal in a clockwise motion then tighten with the
provided multi-tool.
5. Rotate the seat and secure with the quick release.
8. PEDALS & SADDLE

18
CHARGING THE BATTERY:
Using the charger and Battery guide, charging indicators, level indicators etc.
1. Open the key and charger port cover
2. Connect the charger to the battery charging port first.
3. Plug in a power source. The LED will turn RED.
4. If the LED is GREEN, unplug from power source and repeat steps 1. and 2.
5. A full charge will require 3-4 hours, depending on current battery level. While charging, the LED will show RED.
6. Disconnect the charger when the LED turns green, it indicates Full Charge.
1 2
4 5