DECKED TOOL BOX User manual

DECKED.COM |208-806-0251 TBFDL | v.1 |Page 1
STEP 1:
Place rubber pads on bed rails.
(1) per side.
STEP 2:
Unless you’ve experienced radiation exposure (allowing
you to mutate into The Hulk) grab a friend to help you lift
the Tool Box into place on top of the rubber pads. Center
the Tool Box L-R between the bed rails and align square
to the bed on both sides.
WARNING
SHIFT TOOL BOX
AS NEEDED FOR
CAB CLEARANCE
STEP 3:
Open the Tool Box lid to be sure it doesn’t hit the cab of truck
under any circumstances. Make sure there is adequate
distance between the lid and any cab mounted cameras,
lights or other important bits.
Shift the Tool Box toward the tailgate as needed.
STEP 4:
Install (2) bed rail clamps on each side of the Tool Box using one location as close to the tailgate as possible and one location
as close to the cab as possible. NOTE: Outermost clamp locations vary per vehicle depending on the topology of the bed rails.
Secure clamps with bolts, washers and nuts in order shown. Tighten all four bolts.
Test tightness by closing Tool Box lid and pulling on the handles, L-R and front to back.
Tool Box should not move on the bed rails.
(2) BOLTS, (2) WASHERS PER SIDE
(OUTERMOST HOLE LOCATIONS
VARY DEPENDING ON VEHICLE)
PLACE RUBBER PAD OVER
INSIDE LEDGE OF BED RAIL
TOOL BOX INSTALLATION TOOLS NEEDED:
• 3/8” socket
• Ratchet
(2) CLAMPS, (2) NUTS PER SIDE
(OUTERMOST HOLE LOCATIONS
VARY DEPENDING ON VEHICLE)
slide
pull up
SIDE VIEW
TEAM LIFT
REQUIRED
TEAM LIFT
REQUIRED:

TBFDL | v.1 | Page 2DECKED.COM |208-806-0251
DECKEDLLCwarrantstotheoriginalpurchaserof this productthattheproductwillbefreefrom manufacturingdefects in workmanshipandmaterialsfora period of three (3)
yearsfrom the dateoftheoriginalpurchase.If within three (3) yearsfromthe originaldateof purchase this productfailsduetodefectinmaterialsorworkmanship,DECKED
LLCwillreplaceany defectivepart at itsoption.
Theoriginalpurchasermustcontact the DECKED LLC customerserviceteam and provideadescriptionofthedefective part,includingdigitalpicturesifrequested,with the
originalpurchasedocumentationas validationofwarranty coverageor havepreviously activatedtheir warranty online.
Thiswarranty DOES NOT coverorapplyto:
•Damagetotheproductdue to misuse, mishandling and abuse.
•Productsnot used in accordancewiththemanufacturer’sinstructionsorrecommendations.
•Productnot assembled or installed accordingtomanufacturer’sinstructions.
•Normalwearandtear.
•Undeclareddamagetothe systemduring shipping, acts ofGod.Inaddition, consequential
damageandincidentaldamages(includinglosttime)suchasdamagetopersons or property
arenotcoveredunderthiswarranty.
Moreinformation:DECKED.COM/WARRANTY
CLICK
GROUND
LADDER
STEP 1
▼ WARNING DON’T DO THIS ▼
CLICK AGAIN
STEP 2 STEP 3
(LADDER COULD SWING INTO
TRUCK AND CAUSE DAMAGE
TO VEHICLE)
USING THE LADDER:
WATCHLADDERINSTRUCTIONALVIDEOS:
DECKED.COM/LADDER
@DECKEDUSA | #DECKEDUSA
FOLLOW US:
DECKED 3-YEAR LIMITED WARRANTY:
REGISTERYOUR DECKEDGEAR:
DECKED.COM/REGISTER
Failure to read and follow instructions for DECKED Tool Box installation and ladder usage may result in personal injury, or cause damage to the vehicle. Please read our
comprehensive DECKED Tool Box warning in detail: DECKED.COM/TOOLBOXWARNING
WARNING:
GRAB HANDLE
FOR SUPPORT