Decon wheel BeRollka Rookie User manual

2020-04-27
Assembly instructions for BeRollka Rookie
MED3104
1. Remove wheels and hub sleeve with brakes on both sides.
2. Check the correct placement for the stop pin and that the battery box is removed.

2020-04-27
3. Assemble the plate (right side) according to picture. Parts pair mounting set:
Item No. Part Number Qty Description
1 MED2000 1 Bracket
2 100 400 007 2 Spacer
3 XSM8ML 1 Locknut M8
4 100 400 017 1 Spacer
5 XSM16M 1 Nut M16 low model
6 405239 1 Nordlock Washer
7 100 400 001 1 Spacer
8 100 400 005 1 Spacer
9 XSM8X35 1 Screw M8 x 35
10 HW069 1 Hubsleever M16x1/12,7
11 XSM16FJ 1 Single Coil Washer M16
4. Assemble the back placed battery bag.

2020-04-27
Assembler the Attendant control
Alternate: Attendant control unit. (only right side) Attendant control with Joystick control unit. (both sides)
With Attendant control unit
Item No Part Number Qty Description
1 MED1200 1 Attendant control
2 XSM6TG 1 External Teeth Washer 6,4
3 XSM6BR 1 Plain Washer M6
4 XSM6X20 1 Screw M6 x 20
5 X-klamma2 1 Clamp 2
With Joystick control unit
Item No. Part Number Qty Description
1 XOC-48110-A1 1 Joystick
2 XKlamma 2 1 Clamp 2
3 MED1316 1 Plate with pin
4 XSM6X16 2 Screw M6 x 16
5 XSM6X45 1 Screw M6 x 16
6 XSM6BR 3 Plain Washer M6
7 XSM6ML 3 Locknut M6
8 MED1317 1 Bracket
5. Assemble the control unit that you have.
If you move
the Joystick to
the Left side,
then you have
to move this
too the other
side.

2020-04-27
Åtdragningsmoment / Tightening torque
Metriska grovgängor, stål.
Metric coarse threads, steel.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M3
1,2 Nm
M4
3 Nm
M5
6 Nm
M6
10 Nm
M8
25 Nm
M10
50 Nm
M12
85 Nm
Navhylsor.
Sleeves.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M16x1
30 Nm
M18x1
40 Nm