Decon wheel Meyra Nano 1.155 User manual

2020-09-10
Assembly instructions for Meyra Nano 1.155
MEM6399P and MEM6400P
1. Remember to assemble the wheelchairs original anti tip devices.
2. Remove wheels and hub sleeves on both side of the wheelchair.
3. Check the correct placement for the eMove, and that it is axle Ø12,7 x 51 with
Part Number: XOE-2530E-C0 and Spacer with Part Number: XOC-25383-00 and
Stop pins is assembled with Part Number: 320003
4
5
6

2020-09-10
4. Assemble the bracket according to pictures on top.
Parts for right side mounting:
Item No. Part Number Qty Description
1 HW052 1 Sleeve
2 XSFM6X12 2 Screw Countersunk M6 x 12
3 310050 1 Bracket
4 XOC-25383-00 1 Spacer
5 93440-120520 1 Circlip
6 320003 1 Stop Pin Bracket
Note! If you only order the mounting set, the axle, axle spacer and the circlip are not
included, for replacement see the service manual.
5. Assemble the under placed battery bag.

2020-09-10
Brake assemble
6. Assemble the bracket according to pictures on top.
Parts for right side mounting:
Item No. Part Number Qty Description
1 XSM6X16 2 Screw Rounded M6 x 16
2 XSM6X12 2 Screw Rounded M6 x 12
3 AS 1474 - M6 2 Square Nut
4 310052 1 Bracket
7. To mounting back the original wheels, you need to assembly the following parts to the
wheel axels.
Item No. Part Number Qty Description
1 XOC-25383-00 1 Spacer
2 93440-120520 1 Circlip

2020-09-10
Åtdragningsmoment / Tightening torque
Metriska grovgängor, stål.
Metric coarse threads, steel.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M3
1,2 Nm
M4
3 Nm
M5
6 Nm
M6
10 Nm
M8
25 Nm
M10
50 Nm
M12
85 Nm
Navhylsor.
Sleeves.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M16x1
30 Nm
M18x1
40 Nm