Decon wheel Helium User manual

2021-02-02
Assembly instructions for Helium, Nitrum
With 0° Camber
MEM6137 and MEM6138
1. Remove wheels and Sleeves.
2. Check the correct placement for the eMove and assemble with
axle Ø12,7-46 with part number: X0E-2530E-00.
Only STD rear axle.
Not PRO rear axle or
short COG rear axle.

2021-02-02
3. Assemble the plate (right side) according to picture.
Parts for right side mounting:
Item No. Part Number Qty Description
1 HW072 1 Hub sleeve
2 XSTM6X12 1 Stop Screw M6 x 12
3 XSM8X16 1 Screw : Round - M8 x 16
4 XOE-22274-1O 1 Bracket
Note! If you only order the mounting set, the axle it’s not included, for replacement see
the service manual.

2021-02-02
4. Assemble the under placed battery bag or if have order a Lithium battery place the
battery holder as the picture bellow.
Assembly of Battery bracket
MEM5015
Item No. Part Number Qty Description
1 MEM5002 1 Hoop
2 MEM5003 4 Clamp
3 XSFM5X12 2 Screw Countersunk M5 x12
4 XSM5ML 2 Nut Self-Locking M5
5 XSSM8X16 4 Bolt Round-Square M8 x16
6 XSM8ML 4 Nut Self-Locking M8
7 MED5001 Rev3 1 Battery plate eDrive/ eMove
8 XSFM6X16 4 Screw Countersunk M6 x16
9 XSM6ML 4 Nut Self-Locking M6
10 MEM5011 1 Bracket