Decon wheel Meyra Nano 1.155 User manual

2020-09-10
Assembly instructions for Meyra Nano 1.155
MED3315
1. Remove wheels and sleeves on both sides.
2. Check the correct placement for the stop pin and do not use antitip devices
on the E-drive unit.

2020-09-10
3. Assembly the plate (right side) according to picture.
4. Parts pair mountingset:
Item No. Part Number Qty Description
1 MED1460 1 Bracket
2 HW052 1 Sleeve
3 XSFM6X12 2 Screw Countersunk M6 x 12
5. Assemble the under placed battery bag.

2020-09-10
Brake assemble
6. Assemble the bracket according to pictures on top.
Parts for right side mounting:
Item No. Part Number Qty Description
1 XSM6X16 2 Screw Rounded M6 x 16
2 XSM6X12 2 Screw Rounded M6 x 12
3 AS 1474 - M6 2 Square Nut
4 310052 1 Bracket
7. To mounting back the original wheels, you need to assembly the following parts to the
wheel axels.
Item No. Part Number Qty Description
1 XOC-25383-00 1 Spacer
2 93440-120520 1 Circlip

2020-09-10
Joystick with Swing Away assembly on armrest with Code 748
Item No. Part Number Qty Description
1 MED1500 Rev5 1 Bracket
2 X0C-48160-C0 1 Swing Away Bracket
3 NJF1022 1 Ball pin with pin
4 XSM6BR 4 Plain Washer M6
5 XSM6ML 2 Nut Self-Locking M6
6 XSM6X16 2 Screw Round M6 x 16
Note! MED1300 for the Leftside.

2020-09-10
Joystick with Parallel assembly on armrest with Code 748
Item No. Part Number Qty Description
1 MED1500 Rev5 1 Bracket
2 NJF1022 1 Ball pin with pin
3 XSM6BR 4 Plain Washer M6
4 XSM6ML 2 Nut Self-Locking M6
5 XSM6X16 2 Screw Round M6 x 16
6 X0F-48160-D00 1 Parallel Bracket
Note! MED1300 for the Leftside.

2020-09-10
Åtdragningsmoment / Tightening torque
Metriska grovgängor, stål.
Metric coarse threads, steel.
Gänga / Thread
Åtdragningsmoment / Tightening
torque
M3
1,2 Nm
M4
3 Nm
M5
6 Nm
M6
10 Nm
M8
25 Nm
M10
50 Nm
M12
85 Nm
Navhylsor.
Sleeves.
Gänga / Thread
Åtdragningsmoment / Tightening
torque
M16x1
30 Nm
M18x1
40 Nm