Decon wheel Bellis MED3040 User manual

4/21/2020
Assembly instructions for Bellis
MED3040
1. Remove wheels and sleeves on both sides.
2. Check the correct placement for the stop pin on the E-drive unit.

4/21/2020
Placement for the adapter plate.
3. Assembly the plate (right side) according to picture.
4. Parts pair mountingset:
Item No. Part Number Qty Description
1 MED2000 1 Bracket
2 100 400 007 1 Spacer
3 HW069 1 Hubsleever M16x1
4 405239 1 Nordlock washer
5 XSM16FJ 1 Single coil washer M16
6 XSM16M 1 Nut M16
7 100 400 017 1 Spacer
8 100 400 002 1 Spacer
9 XSM8X25 1 Screw M8x25
10 XSM8ML 1 Lock nut M8
11 XSM8BR 2 Plain washer 8,4
5. Mount the back placed battery bag.

4/21/2020
Assembly of the joystick
6. Loose the screws until you are able to place the bracket (MED1500) between, then
you assemble them again.

4/21/2020
Assembler the Alternate: Attendant control (only right side)
Item No. Part Number Qty Description
1 XOC-48110-A1 1 Joystick
2 MED1316 1 Plate with pin
3 XSM6X16 2 Screw M6 x 16
4 XSM6X35 1 Screw M6 x 35
5 XSM6BR 3 Plain Washer 6,4
6 XSM6ML 3 Locknut M6
7 MED1317 1 Bracket
8 Xklamma2 1 XClamp2
9 100 400 044 1 Spacer
Move this
too the
other side,
if you
assemble
the joystick
on the left
side.

4/21/2020
Alternative attendant control (only right side)
Item No. Part Number Qty Description
1 XSM6TG 1 Thorn Washer 6,4
2 Xklamma2 1 XClamp2
3 XSM6X20 1 Screw M6 x 20
4 XSM6BR 1 Plain Washer 6,4
5 MED1200 1 Attendant control