Decon wheel Helium User manual

2022-09-16 1(4)
Assembly instructions for Helium and Nitrum
With 0° Camber
MEM6137P and MEM6138P
1. Remove wheels and sleeves.
2. Check the correct placement for the eMove and assemble with
axle Ø12,7-46 with part number: X0E-2530E-00.
Stop pins are assembled with Part Numbers: 320003.
Only STD rear axle.
Not PRO rear axle or
short COG rear axle.
5

2022-09-16 2(4)
3. Assemble the plate (right side) according to picture.
Parts for right side mounting:
Item No. Part Number Qty Description
1 HW072 1 Hub sleeve
2 XSTM6X12 1 Stop Screw M6 x 12
3 XSM8X16 1 Screw : Round - M8 x 16
4 310031 1 Bracket
5 320003 1 Stop Pin
Note! If you only order the mounting set, the axle it’s not included, for replacement see
the service manual.
4. Assemble the under placed battery bag or if have order a Lithium battery place the
battery holder as the picture bellow.

2022-09-16 3(4)
Assembly of Battery bracket
MEM5015
Item No. Part Number Qty Description
1 MEM5002 1 Hoop
2 MEM5003 4 Clamp
3 XSFM5X12 2 Screw Countersunk M5 x12
4 XSM5ML 2 Nut Self-Locking M5
5 XSSM8X16 4 Bolt Round-Square M8 x16
6 XSM8ML 4 Nut Self-Locking M8
7 MED5001 Rev3 1 Battery plate eDrive/ eMove
8 XSFM6X16 4 Screw Countersunk M6 x16
9 XSM6ML 4 Nut Self-Locking M6
10 MEM5011 1 Bracket
Åtdragningsmoment / Tightening torque

2022-09-16 4(4)
Metriska grovgängor, stål.
Metric coarse threads, steel.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M3
1,2 Nm
M4
3 Nm
M5
6 Nm
M6
10 Nm
M8
25 Nm
M10
50 Nm
M12
85 Nm
Navhylsor.
Hubsleever.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M16x1
30 Nm
M18x1
40 Nm