Decon wheel BeRollka B2 MED3102 User manual

2018-01-23
Assembly instructions for BeRollka B2
MED3102
1. Remove wheels and hub sleever on both sides.
2. Check the correct placement for the stop pin and the battery connectors. Check that
the Battery Box is removed on the E-Drive. Use the anti tip devices on the eDrive.

2018-01-23
3. Assemble the plate (right side) according to picture. Parts pair mounting set:
Item No. Part Number Qty Description
1 MED2000 1 Bracket
2 XSM6ML 2 Locknut M6
3 XSM6X45 1 Screw M6 x 45
4 100 400 017 1 Spacer
5 HW069 1 Hubsleever M16x1/12,7
6 405239 2 Nordlock Washer M16
7 XSM16M 1 Nut M16 low model
8 XSM12ML 2 Locknut M12
9 XSM12BR 2 Washer : Plain - M12
10 XSM6X40 1 Screw M6 x 40
11 MED3102-02 1 Bracket 2 BeRollka B2
12 MED3102-01 1 Assy Bracket 1 BeRollka B2
13 100 400 020 1 Spacer
4. Assemble the under placed battery bag onto the wheelchair.

2018-01-23
MED1356
Attendant control with Joystick controller
Item No. Part Number Qty Description
1 MED1317 1 Bracket
2 XSM6X45 1 Screw M6 x 45
3 XSM6X20 2 Screw M6 x 20
4 XSM6BR 3 Plain Washer M6
5 XSM6ML 2 Locknut M6
6 MED1316 1 Plate with pin
7 XA2-2612K-00 1 Clamp with thread
8 XA2-2612E-00 1 Clamp with hole
1. Assemble the Attendant control with the Joystick control on any side. If you change
side you must move (A) to the other side.
A

2018-01-23
Attendant control with attendant controller (only right side)
2. For the attendant control unit, you need these parts.
Item No Part Number Qty Description
1 XSM6BRTG 1 Torn washer
2 X-Klamma2 1 Clamp 22 mm
3 XSM6XBR 1 Plain Washer
4 XSM6X20 1 Screw M6 x 20
3
4
2
1