Decon wheel Netti I User manual

2020-06-15
Assembly instructions for Netti I, II, III
MED3010
1. Remove wheels on both sides.
2. Check the correct placement for the stop pin, and that the screws XSM6X10 with a
lock washer for the handles are mounted.

2020-06-15
3. Assembly the plate (right side) according to picture.
Item No. Part Number Qty Description
1 MED2000 1 Bracket
2 HW084 1 Hub Sleeve M18X1
3 100 400 016 1 Spacer
4 XSM18M 1 Nut : Standard - M18
5 100 400 008 2 Spacer
6 100 400 011 2 Spacer
7 XSM8X40 1 Screw : Round - M8 x 40
8 XSM8ML 1 Nut : Self-Locking - M8
9 405241 1 Nordlock Washer
10 100 400 014 1 Spacer

2020-06-15
4. Assembly the battery bag according to picture above.
5. Assembly for optional joystick bracket according to picture above.
Item No. Part Number Qty Description
1 XSM6X16 2 Screw Round M6 x 16
2 XSM6BR 2 Washer Plain M6
3 XSM6ML 2 Nut Self-Locking M6
4 MED1500 Rev5 1 Bracket
5 MC6SM5X40 2 Screw Socket M5 x 40

2020-06-15
Item No. Part Number Qty Description
1 XSM6BR 2 Plain Washer M6
2 XSM6X50 1 Screw M6 x 50
3 XA2-2612E-00 1 Clamp with hole
4 XA2-2612K-00 Drilled 6,2 1 Clamp with drilled hole 6,2 mm

2020-06-15
MED1356
Attendant control with Joystick controller
Item No. Part Number Qty Description
1 MED1317 1 Bracket
2 MC6SM6X35 1 Screw M6 x 35
3 XSM6X16 2 Screw M6 x 16
4 XSM6BR 3 Plain Washer M6
5 XSM6ML 2 Locknut M6
6 MED1316 1 Plate with pin
7 XA2-2612K-00 1 Clamp with thread
8 XA2-2612E-00 1 Clamp with hole
A

2020-06-15
Åtdragningsmoment / Tightening torque
Metriska grovgängor, stål.
Metric coarse threads, steel.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M3
1,2 Nm
M4
3 Nm
M5
6 Nm
M6
10 Nm
M8
25 Nm
M10
50 Nm
M12
85 Nm
Navhylsor.
Sleeves.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M16x1
30 Nm
M18x1
40 Nm