Denver MS-330 User manual

MS-330
Please read this user manual carefully before using the receiver.
1

Location of Controls
Switching the radio on
2
1. Power
Standby on/off
2. Mode
Press to change the radio mode
3. Preset
Press and hold to enter favourite
list
Press briefly to recall the favourite
list
. Left
Back to previous menu/left
cursor
5. Right
Right cursor/Enter edit menu
under Favourite list
6. Menu
Access main menu
7. Up/Down/Enter
Rotate to scroll up/down on the
main menu/ Push to
confirm/select menu options/
Push to stop/resume playback
of radio channel
8. Volume knob
Rotate to adjust the volume
level
9. TFT 2. ” color screen
10. Speaker
11. DC IN jack

Connect the mains adaptor to the radio unit, one end to the DC IN on the radio and the other end to the
AC mains wall socket.
Caution: Use only the mains adaptor supplied with the radio. Connecting a power supply with a different
rating will cause permanent damage to the radio and may be hazardous.
The radio will power up and display Welcome :
Select the language for the radio menu:
It will ask to set the <Check Network when Power on>, it is suggested to choose <Yes> . The radio
will always check the available WiFi network automatically.
Connecting to your WiFi Network
Followed by the steps above, it will come to the network configuration setting. Choose <Yes> to start
searching the available WiFi network. If your router has the WPS function, you can select <Yes(WPS >
to proceed.
After the search is done, it will display a list of the available wifi network.
Choose your network from the list, enter the password if the network is set with encryption code. If your
network does not require any password to access, the wifi will be connected automatically.
3
Welcome

Note: The encryption code would have been set up by the person who set up and configured your
network.
Follow the steps below to enter the password of your wifi network:
-
Rotate the [Up/Down/Enter] knob to browse the character
-
Press the [Right] button to skip to the next entry
-
When it is done, push the [Up/Down/Enter] rotary knob to confirm.
The radio will start connecting to the network.
When the wifi is connected successfully, it will pop to the main menu and you are ready to access the
worldwide internet stations.
Internet Radio
Choose <Internet Radio> from the menu, you can see several listed options.
To start listening the radio stations worldwide, select <Radio Station/Music>. You can find your
favourite station by Genre or Location.
My Favorite
This is to show the list of your Favorite stations which have been added to the list.
To preset a station:
When your favourite station is playing and you want to add it to favourite list, press and hold the
[Preset] button and <Add to My Favorite> menu will display. The preset number will be assigned
automatically to the next available number. Push the [Up/Down/Enter] knob to confirm. The playing
station will be added to the preset list.
4

The presets will be stored in ascending order. You can store up to 250 presets.
Note: Preset to 5 are reserved for your own choice of the dedicated radio channels. The preset will be
intended to store from no. 6 onwards, you can scroll to choose no. -5 at your preference.
You can edit your favorite list anytime with the options below:
Delete – To delete the selected station
Shift up- To shift the selected station by one level up on the ranking
Shift down – To shift the selected station by one level down on the ranking
Rename – To rename the selected station
Play – press and play the selected station
Navigate to <My Favourite> on the menu or press the [Preset] button, c hoose the radio station that
you want to make the above changes. Then press the [Right] button to enter the edit menu.
To recall a preset station:
Press the [Preset] button briefly and choose your desire station.
Local Radio
Select this option to access quickly the radio station located in your country.
History
The radio will memorize the last 10 listened stations.
Service
Search Stations
You can find your desire radio station by inputting the name of the radio or just a few characters to filter
the list.
5
Push [Up/Down/Enter] knob
to confirm
The symbol on the top row means station is
added to favourite list

A dd New Radio Station
If you want to add the station and you have the audio stream URL, it is suggested to add it through the
MediaYou website as follow, or you can contact MediaYou if the station cannot be located.
http://www.mediayou.net/
Please refer to the “Manage My mediaU” under Configuration section below for more details.
When a radio station is playing, press the [Right] button and it will display the station logo (if any).
Continue to press the [Right] button to view the radio information.
Media Center
UPnP (Universal Plug and Play
The device supports UPnP and is DLNA-compatible.
This provides the opportunity to stream music from other network devices.
However, this requires you to have a compatible device in your network that can function as a server. This can be
e.g., a network hard drive or a conventional PC with e.g., Windows 8 via which media sharing is permitted. The
folders can then be browsed and played on the Tuner.
Please make sure your computer laptop is on the same Wi-Fi network as the Radio before you start
using this function
Music streaming via UPnP
1. Once the UPnP server is configure to share media files with your radio, you can start music
streaming.
2. On the main menu, select <Media Centre> and choose <UPnP>
3. It may take a few seconds for the radio to complete the scan for available UPnP servers. If no UPnP
servers are found, it will show <Empty List>.
4. After a successful scan is done, select your UPnP server.
5. The radio will show the media categories available from the UPnP server, e.g. ‘Music’, ‘Playlists’
etc.
6. Choose the media files that you wish to play.
Information Center
On the main menu, navigate to <Information Center> and select to enter. You will find the options as
follow:
6

Weather Information
The radio supports weather display in standby mode.
Navigate to Information Center> Weather Information, choose the region you want it to display the
weather information. After region is selected, continue pressing OK (push the [Up/Down/Enter] rotary
knob) unit it shows <Add to Standby Display>, push the [Up/Down/Enter] rotary knob to confirm.
The date/time and weather info will appear alternatively every 10 seconds under the standby mode.
When the weather screen is shown, press [Right] button to see the current weather information.
Press the [Right] button again will show the forecast for the next days.
Continue to press the [Right] button will display the detailed weather information for each of the next
days. To view more details for a particular day, rotate the rotary knob to scroll down for more
information.
Note: Weather information may vary and not sync to the actual weather depends on the network
situation.
System Information
You can view the information of the radio such as the software version / Wireless Mac / IP address..etc.
Configuration
Time Display
You can choose the time display as analog or digital form.
Manage my mediaU
You can personalize your own favorite station list through MediaYou website.
Set <Enable> on this option. It will prompt you to sign up on www.mediayou.net before the function can
be used. On the main menu, you will find the <My mediaU> icon appears after Enable is set.
Follow the steps below to sign up MediaYou:
1) Visit http://www.mediayou.net/
2) Then you have to find out the Mac Address of the radio for registration.
To locate the MAC address, please follow the path below:
2a) Go to Main Menu and select <Information Center>
2b) Go to <System Information>
2c) Choose <Wireless Info> and you will find your Mac address.
3) Log-in Media You, click Radio, then input the Radio name and Serial number (i.e. MAC Address)
7

and save it.
You can then organize your own favorite stations or add any new station which is not found on the
station list. Once the changes are done, your radio will synchronize the changes immediately and you
will find your favorite list under <My MediaU> on the radio menu.
Note: If you are going to add URL which is not on MediaU database, ensure the URL is an audio
streaming URL or contact Media U to add it for you.
Network
Wireless Network Configuration
Press <Enter> to scan for wireless network list.
Wireless Network
（ WPS PBC ）
The WPS allows to connect the radio with your router by pressing one key on the radio and a WPS key
on your router for wifi connection, provided that your router has the WPS function.
Manual Configuration
You can set the DHCP on or off, and enter the SSID name, or delete the connected SSID.
Check network when power on
This is set to enable or disable <Check network when power on>.
Date & Time
The time is set automatically to your local area.
You can choose to manual set the time if you want.
Time Format setting
Time format setting: 12hours / 2 hours
Date Format setting
Date format: YYYY/MM/DD, DD/MM/YYYY and MM/DD/YYYY
If manual setup is selected, you will see an added item Daylight Saving Time （DST ）setting
appeared on the list.
Alarm
Dual alarm clock
There are 2 alarm clocks available and settings as follow:
Schedule the alarm: You can schedule the alarm repeated for every day, particular day in the week or
just once.
Alarm sound: Wake to Radio (the radio must be one of the favourite stations), Wake to Melody or Wake
to Beeping sound.
Alarm Volume: adjust your desire volume level.
8

NAP Alarm
If you would like to take a nap or need an alarm to due in short time, you can use this function.
You can select the time from 5 minutes up to 120 minutes. No Snooze function available for the NAP
alarm.
Remark
：
The NAP Alarm will only release beeping sound.
Snooze
When the Alarm sounds, press any keys on the radio unit (except Power will activate the <Snooze>.
The alarm will come on again 5 minutes later. You can always press [Power] button to cancel the
alarm.
Remark: In case there is network issue renders the wake to radio not working, it will automatically issue
melody sound after minute.
Timer
Press [Left] or [Right] button to set the timer, then press [Up/Down/Enter] knob to confirm. When the
time is due, it will release some beeping sound. Press the [Up/Down/Enter] to cancel.
Language
There are 17 Languages available, such as English, German, French, Norwegian, Italiano, Svenska,
Dansk and others.
Dimmer
You can adjust the backlight of the LCD with below settings:
Power Saving
You can set the backlight to dim down when there is no operation in a certain time of period.
Turn on
You can adjust the backlight level for the operation mode, i.e. when you are operating the radio or
checking on the menu.
Display
You can choose the display in color or monochrome style.
Power Management
This function is to allow the radio to go Standby if there is no internet signal received in certain time to
save power. The default setting is 15 minutes. When the radio does not receive any internet signal, the
radio will go into Standby after 15 minutes. Other time frame in 5 minutes and 30 minutes are available.
Sleep Timer
You can set the timer to turn the radio in standby after certain time elapsed, from 15 minutes to 180
minutes in the step of every 15 minute.
Buffer
9

Sometimes you may experience uneven playback of the internet radio. This can happen if the
internet connection is slow or network congestion occurs. To help improving the situation, you
can choose longer buffer time to get a few seconds of radio stream before beginning to play. The
default value is 2 seconds. You can choose or 8 seconds if you prefer to have a longer buffering
time.
Weather
The radio will display weather information in standby by default. You can select the regions and
temperature unit. You can turn it off by selecting “Show on Standby > Off”.
Local Radio Setup
The radio will detect the stations in your country automatically. Choose <Local> on the radio and it will
display the station list of your country.
You can also change to set the State and City of your country as Local Radio. Choose “Manual Setup”
to do the setting.
Playback Setup
This is to set the preference of UPnP playback. You can set the playback as Off, Repeat one, Repeat
all, Shuffle.
Device
-Rename
This is to set the name of your radio when it becomes a media renderer. The name by default is
AirMusic. Choose “Rename” to make the change.
-AirMusic Control App
A remote control App is available which you can install on your mobile device to control the radio.
Select this option to view the QR code to download the App.
Key
This function allows you to change the [MODE] button with other function rather than serving the mode
function. To see the choices available, select this option and then set the one you want.
Resume When Power On
The radio will resume playing the last listened station when you power it on next time if ON is selected
in this option. The ON is set by default.
Software update
Upgrade information will pop up on the display when there is update version available.
It is suggested to check if there is latest software available from time to time.
Reset to default
You can do this factory reset to empty all of the settings and it comes back to default settings.
**Please note all the Station presets, Settings and configuration will be lost after you have performed the
“Factory Reset”.
10