Denver SCO-80100 Operation instructions

Original
Instruction
SCO-80100
facebook.com/denverelectronics
1

Before operating t is ve icle, read all t e instructions for safe assembly and operations. User’s manual can
guide you t roug t e functions and usage of E-scooter. Before using t is E-scooter, familiarize yourself
wit ow to operate, so t at you can keep t e E-Scooter in t e best condition possible.
T is appliance can be used by c ildren aged from 14 years and above and persons wit reduced p ysical,
sensory or mental capabilities or lack of experience and knowledge if t ey ave been given supervision or
instruction concerning use of t e appliance in a safe way and understand t e azards involved.
C ildren s all not play wit t e appliance.
Cleaning and user maintenance s all not be made by c ildren wit out supervision.
Version 1.0
11
2

Table of Contents
Table of Contents…………………………………..…………………………………………..2
Product and Accessories…………………………………………………………………….3
Folding steps…………………………………………………………………………………..4-
Handlebar assembly…………………………………………………………………………..5
Charger connection……………………………………………………………………………6
Intended Use………………………………………………………………………………..……7
Safety Instruction………………………………………………………………………..….7-8
aintenance…………………………………………………………………………………9-10
Instrument menu…………………………………………………………………………11-12
Operation Guide……………………………………………………………………………....12
List of parameters……………………………………………………………………………..13
E-scooter safe parking……………………………………………………………………….14
Safe transportation……………………………………………………………………………14
Warnings……………………………………………………………………………………...14-16
3

1. Product and Accessories
Mechanical brake
Left
Clasp
Electric brake
Accelerator

2. Folding steps
1. Unfolding:
1) Stand the E-scooter on its wheels, press the unlock clasp.
2) Raise the handle slowly.
3) The E-scooter is unfolded as soon as you hear the rod click into place.
2. Folding
1) Hold the clasp and pull it outward
2) Press the front tube of E-scooter downward (Attention: The limit position must be put right.)
3) The rod clicks audibly into place.

4) Fold/Unfold Handle
Fold-Unfold Position

Move handle down to fold the e-scooter
Move handle up to unfold the e-scooter
The knob must be set to RIDING when riding for safety issue to prevent unintended folding the e-
scooter.
3. Handlebar assembly
1) Parts inside the packaging: two handlebars
2) Change display angle: Loosen screw on the handlebar, rotate the axle to make the
handlebar meter screen upwards while the and display screen turn inwards in a horizontal
level. Remember to tighten screws again
3) Before operating the E-scooter, turn
the handlebar grips and carefully check
all the components to make sure that the
steering is correctly installed as
described above, and that all connecting
parts are secure and fully functional.

Figure (2)
Figure (1)
4. Charger connection
Plug the adapter into the charging port