Denver SEL-10360DONAR Operation instructions

1
Original manual
SEL-10360DONAR
facebook.com/denver.eu
March/2023 - Version 1.0
IMPORTANT! Read carefully and keep for future reference.
Before operating this vehicle, read all the instructions for safe assembly and
operations. User’s manual can guide you through the functions and usage of Electric
scooter. Before using this Electric scooter, familiarize yourself with how to operate, so
that you can keep the Electric scooter in the best condition possible.
This appliance can be used by children aged from 14 years and above and persons
with reduced physical, sensory, or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
The appliance is only to be used with the power supply unit provided with the
appliance. This appliance contains batteries that are not replaceable.

2
Table of Contents
1. Important information before use ........................................................................................................ 3
2. Product overview ....................................................................................................................................... 5
3. Unfolding and folding the scooter ............................................................................................................. 7
4. Assembling the device ............................................................................................................................. 10
5. Charging the scooter ................................................................................................................................ 12
6. Intended Use ............................................................................................................................................ 13
7. Safety Instruction ..................................................................................................................................... 13
8. Maintenance ............................................................................................................................................ 14
9. Operational control ............................................................................................................................. 19
10. Specification ........................................................................................................................................... 22
11. Warnings ................................................................................................................................................ 23
12. Electric scooter safe parking .................................................................................................................. 23
13. Safe transportation ................................................................................................................................ 23
14. Other warnings………………………………………………………………………………………………………………………………..26

3
1. Important information before use
We urge owners of this Scooter to charged and store it in a safe way.
For safety reason and protect battery life, never charge the electric scooter in
temperatures below 5 °C or above 45 °C. Equally, always disconnect the electric scooter
with the power cable once fully charged. Always use the supplied power adaptor to
charge the electric scooter.
Make sure that all screws are properly tightened to avoid unsafe situations.
In case you ride in rain or wet conditions then make sure to dry the pedal board with a
cloth top and bottom when done riding.
WARNING
● Please make sure to check that the steering system is correctly adjusted
and that all connection components are firmly secured and not broken
before riding, refer to handlebar assembly and safety instruction.
● Please read operation guide and warnings of correct techniques for use
and braking
● Always wear shoes.
● Self-locking nuts and other self- locking fixings may lose their
effectiveness over time. Check these with regular intervals.
● All parts and materials of electric scooter must not be changed.
Modifications are not allowed.
1.1 Technical modifications
Avoid removal of components or any kind of technical modification to the scooter in
order to preserve the vehicle in approved condition. Specifically avoid modification of the
following technical systems of the scooter:
 Powertrain system
 Battery system
 Braking system
 Steering system
 Lightning system
 Electrical system
 Wheel equipment

4
 Tyre equipment
 Anti-slip equipment
 Frame structure
Always make sure that required maintenance is conducted professionally by certified
agents.
1.2 Traffic rules
- Do not ride the scooter if you are below 14 years of age.
- Do not ride the scooter with more than 1 person at a time.
- Do not ride the scooter faster than 20 km/h.
- Do not ride the scooter without valid liability insurance.
- Do not ride the scooter under influence of drugs, alcohol, medicine, or the likes.
- Do not ride the scooter when your physical or mental condition is inadequate.
- Always adhere to the applicable traffic rules.
- Always keep yourself informed about changes in traffic rules.
- Always be considerate of weaker road users.
- Always adapt driving speed to traffic conditions. (If necessary, adjust the speed to
pedestrian traffic)
- Always adapt driving speed to road conditions.
- Never obstruct or endanger pedestrians.
- Do not ride the scooter on routes reserved exclusively for pedestrians or restricted
for bicycles.
- Do not ride the scooter on routes reserved exclusively for
cars/vans/trucks/motorcycles/etc. or restricted for bicycles.

5
2. Product overview
1. Brake lever for drum
brake
2. Front light
3. Throttle
4. Display
5. Electric brake
6. Folding mechanism
7. Front reflector
8. Side reflector
9. Foldable stand
10. Rear light/reflector
11. License plate area
12. Charging port

6
Accessories:
1. Power charger: FY0634201500
2. T-shaped Allen key for mounting the screws.
3. Screws for mounting front steer (6 pcs).

7
3. Unfolding and folding the scooter
Unfolding
1. Release the front pole from the hook.
2. Raise the handle slowly.

8
3. Lock the folding mechanism.
Presse the folding handle onto the front pole until it is locked. Pull the folding handle to confirm that
it is locked.
Folding
Press the small ball shaped button as shown below to release the lock.
Pull out the folding handle and now you can lower the front pole.

9

10
4. Assembling the device
Mounting the front steer.
1. Connect below cable tightly
2. Lower the cable inside the tube and carefully lower the steet without getting the cable stuck.

11
3. Mount the 6 screws with the included allen key. Tighten them well.

12
5. Charging the scooter
Connect the supplied power adaptor to the charging port of the electric scooter.
1. Open the rubber flap.
2. Plug the power plug adaptor into the charging port.
3. Fasten the rubber flap after charging to avoid dirt or water to enter.
Please make sure only to use the original power adaptor when charging.

13
6. Intended Use
The Electric scooter is to be used by a person aged at least 14 with a maximum weight of 100
kg. The other parameters for the permissible operation of the Electric scooter are defined in
the section (“10. Specification”). Importantly, the Electric scooter may only be operated in
good visibility conditions and only if the physical conditions for stability on the Electric scooter
are met (for example, not on one leg/not under the influence of drugs or alcohol). When
operating the electric scooter, the operator must wear personal protective equipment
specified in the section (“13. Warnings > 13.1 Preparation”).
7. Safety Instruction
We recommend always wearing helmet and protective gear like elbow, knee, hand, and wrist
protectors to ensure your personal safety.
Also make sure you have read the user manual carefully, to ensure you know how to ride
it in a safe and fun way.
It is your responsibility to be aware of and comply with all regulations. If there are no
regulations for this Electric scooter in your country, please take care of your own safety
and the safety of others.
Also pay attention to other people. Always ride safely and only at a speed that allows you
to brake safely at any time. A common thing for such products is that there is a risk that
you may fall off the product and injure yourself. Always ride as safely as possible.
If lending the electric scooter to friends and family, please make sure they use proper
protective gear and know how to ride it.
Before riding the electric scooter, please check that all parts are working as supposed
to. If any loose parts, abnormal noise, reduced battery life etc. are detected, please
contact your retailer for product service and warranty. Do not repair the electric scooter
yourself.
Inspect the front and rear tire, rear brake, and brake pad according to Section 8 of the
maintenance specification in these operating instructions.

14
Avoid applying too much force, stepping on or lifting scooter in the rear fender. This may
cause the fender to loosen or damage the fender. This is not covered by the warranty.
Avoid constant braking. As a result, the tires will not only wear off, but also become hot.
This will soften the rubber and it will no longer have the same grip on the road as usual.
Do not touch the tire after braking.
If you hear unusual noises or notice friction when switching on the electric scooter, a
bearing may be damaged. A worn bearing may even be indicated by strong vibration of
the handlebar. In this case, please contact your retailer since the bearing needs to be
replaced and/or the handlebar checked and adjusted.
Ride the electric scooter only on a dry surface since otherwise the riding safety and
braking performance may be impaired and the motor or bearings may be damaged.
Please do not ride up or down long and steep slopes.
Stop riding when you receive the "Low Battery Warning". The electric scooter does not
have the same traction as normal, and the electric brake does not work. In this case,
please use the drum brake to stop the electric scooter.
Do not use the electric brake and the throttle at the same time.
A normally working Electric scooter operates safely and quietly. If you hear noises or
notice bumpy operation, please check wheels, bearings, and brakes. Contact your
customer service for repair and maintenance, if necessary.
8. Maintenance
As with any mechanical component, a vehicle is subject to high stresses and wear. The
various materials and components may react differently to wear or fatigue. If the
expected service life for a component has been exceeded, it may break suddenly,
therefore risk causing injuries to the user. Cracks, scratches, and discoloration in the
areas subject to high stresses indicate that the component has exceeded its service life
and should be replaced.
To ensure you get the best and safest possible performance and experience from your
electric scooter, it is important to do regular maintenance for important parts of the
product.
● Battery maintenance
● Bearings, Screws, Brakes and Wheels
● Storage and Cleaning
WARNING

15
Battery maintenance
All batteries have a life cycle, and performance will decrease over time, however, here
are some advice to maximize the life span of the battery.
Make sure that the battery is charged at regular intervals, even if you do not use the
electric scooter for a long time. This is to prevent damage to the battery, caused by low
voltage over an extended period.
Avoid draining the battery completely. It is best to charge while there is still power on it.
This will extend battery life. If the battery is constantly depleted, it will damage the
battery (damaged battery caused by wrong handling are not covered by the warranty).
If riding the electric scooter in cold or very hot areas, the battery time can be lower than
when riding in temperatures from 15-25° Celsius. This is not a failure on the batteries, but
normal behavior.
Please notice: Even a fully charged battery will run out of power if the electric scooter is
not used for a period. Expect a fully charged battery to keep power between 90 and 120
days in off mode, before it is fully discharged. If only partially charged, this period is
lower.
Please make sure the battery does not get above 50° Celsius, or below minus 10° Celsius
for a longer period. (e.g., don’t leave the electric scooter in a hot car in summer, do not
put battery into fire etc.) Low temperature (e.g., subzero temperature) can damage the
battery cells.
Keep the Electric scooter away from open flame or other sources of heat to prevent the
battery from getting too hot. Also make sure not to leave the electric scooter at freezing
temperatures. Both heat and excessive cold can cause the battery to discharge.
Only use original charger or an official replacement, as different batteries may require
specific charger, and if using other chargers, this could cause damage to the product.
Do not overcharge and discharge the battery.
It is forbidden to disassemble battery package. This is only to be handled by official
service repair centers and professionals.
Bearings, Screws, Brakes and Wheels
Your electric scooter is made up of moving parts similar like a bicycle, which in time, will
be susceptible to wear and tear.

16
Bearings and screws:
The electric scooter has sealed and dustproof bearings so that no lubrication is required.
Check the bearings for wear at regular intervals to avoid unsafe riding. Do not jump on
and off and do not apply excessive force otherwise to avoid damage to the bearings. This
is not a sports electric scooter.
Make sure that all nuts and screws are properly tightened to avoid unsafe situations and
check regularly if they seem loose.
Tightening the screws according to below recommended Nm values:
Front wheel – 15Nm
Rear Wheel – 30Nm

17
Folding mechanism – 15Nm
Front pole – ≥4Nm

18
Brakes:
Check the brake for wear at regular intervals to avoid unsafe riding. Do not apply
excessive force to avoid damage to the brake.
Avoid using electric scooter when brakes are worn down, as this is unsafe and will also
damage the brake.
Wheels:
Check the wheels for wear at regular intervals to avoid unsafe riding.
For vacuum inflatable tires, please make sure to keep the right pressure 3.8 Bar, as hard
tires will last longer.
If the wheel seems wobbly even after screws are tightened, the bearings might
be worn down and need replacement.
Storage and cleaning:
If your Electric scooter gets dirty, please clean it with a damp cloth only, you may not use
pressured water-gun or running water, as this could damage vital parts. It is also possible
to use a little toothpaste if the dirt is stuck. Remember to clean with damp cloth after
this.
Please make sure to keep the electric scooter turned off while cleaning it, and make sure
to cover the charging input to avoid problems with the electronics.
Make sure to dry the scooter with a towel, should it become wet.
Please notice: Do not use alcohol, gas, kerosene or other corrosive and volatile chemical
solvents. This can damage both the appearance and the internal structure of the electric
scooter.
Please store your Electric scooter in a dry and cool environment when not in use. Avoid
leaving it outdoors, as it is not made for storing in wet areas. Nor is it good to expose to
high temperatures caused by direct sun for a long time.

19
9. Operational control
For better operation, please read the instructions carefully.
9.1 Control and display
1. Service mode / error condition. Scooter failure. Please contact support.
2. Distance km/mile. Show when turning scooter on.
3. Lights front and back on symbol.
4. Speedometer
5. Km/h or mph
6. Gear mode
7. Battery level

20
9.2 Button and speed transfer
Power on / Power off
Press and hold power button for few seconds and display turn on.
Press one time to activate or deactivate front and rear light.
Quick press two times to change gear.
L = First gear 6 Km/h.
M = Second gear 15 km/h
H = Third gear 20 km/h
Quick press three times to change between km/h and mph on display.