Denver SEL-90100F Operation instructions

1
Original manual
SEL-90100F
facebook.com/denver.eu
December/2022
IMPORTANT! Read carefully and keep for future reference.
Before operating this vehicle, read all the instructions for safe assembly and
operations. User’s manual can guide you through the functions and usage of Electric
scooter. Before using this Electric scooter, familiarize yourself with how to operate, so
that you can keep the Electric scooter in the best condition possible.
This appliance can be used by children aged from 14 years and above and persons
with reduced physical, sensory, or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
The appliance is only to be used with the power supply unit provided with the
appliance. This appliance contains batteries that are not replaceable.

2
Table of Contents
1. Important information before use ........................................................................................................3
2. Product overview.......................................................................................................................................4
3. Unfolding and folding the scooter.............................................................................................................6
4. Assembling the device...............................................................................................................................9
5. Charging the scooter................................................................................................................................10
6. Intended Use............................................................................................................................................10
7. Safety Instruction.....................................................................................................................................10
8. Maintenance............................................................................................................................................13
9. Operational control .............................................................................................................................16
10. Specification...........................................................................................................................................19
11. Warnings................................................................................................................................................20
12. Electric scooter safe parking..................................................................................................................20
13. Safe transportation................................................................................................................................20

3
1. Important information before use
We urge owners of this Scooter to charged and store it in a safe way.
For safety reason and protect battery life, never charge the electric scooter in
temperatures below 5 °C or above 45 °C. Equally, always disconnect the electric scooter
with the power cable once fully charged. Always use the supplied power adapter to
charge the electric scooter.
Make sure that all screws are properly tightened to avoid unsafe situations.
●Please make sure to check that the steering system is correctly adjusted
and that all connection components are firmly secured and not broken
before riding, refer to handlebar assembly and safety instruction.
●Please read operation guide and warnings of correct techniques for use
and braking
●Always wear shoes.
●Self-locking nuts and other self- locking fixings may lose their
effectiveness over time. Check these with regular intervals.
●All parts and materials of electric scooter must not be changed.
Modifications are not allowed.
WARNING

4
2. Product overview
1. Front light
2. Folding mechanism
3. Front suspension
4. Brake lever for disc braker
5. Bell
6. Display
7. Throttle - ON/OFF button
8. Electronic brake
9. Rear light
10.Foldable stand
11.Charging port
12.Disc brake

5
Accessories:
Power charger
Screws for mounting handlebar (4 pcs)
Allen key

6
3. Unfolding and folding the scooter
Unfolding the scooter
1）Place the electric scooter on its wheels like below.
Unlock the hook on the handlebar.
2) Pull up the handle in a gentle way. Raise the handle slowly.

7
3) Close the lock lever located on the lower part of the handlebar support tube.
4) The electric scooter is unfolded as soon as you hear the rod clicks into place.
Folding the scooter
1. Release the release lever located on the lower part of the support tube of the
handlebars.
2. Fully open the release lever.

8
3. Open the scooter by accompanying the handlebar tube downwards.
4. Hook the folded tube onto the appropriate support.

9
4. Assembling the device
Before using the scooter, it is necessary to install the handlebar on the frame main
vehicle.
1). Insert the handlebar into the vehicle frame.
2). After matching the holes in the handlebar with those of the frame, insert the screws
and tighten them well. Repeat the operation also in the side opposite side of the
handlebar. All 4 screws should be used.

10
5. Charging the scooter
Connect the supplied power adapter to the charging port of the electric scooter. Please
make sure only to use the original power adapter when charging.
6. Intended Use
The Electric scooter is to be used by a person aged at least 14 with a maximum weight of 120
kg. The other parameters for the permissible operation of the Electric scooter are defined in
the section (“10. Specifications”) . Importantly, the Electric scooter may only be operated in
good visibility conditions and only if the physical conditions for stability on the Electric scooter
are met (for example, not on one leg/not under the influence of drugs or alcohol). When
operating the electric scooter, the operator must wear personal protective equipment
specified in the section (“13. Safe transportation” > 13.1 Preparation”).
7. Safety Instruction
We recommend always wearing helmet and protective gear like elbow, knee, hand and wrist
protectors to ensure your personal safety.
Also make sure you have read the user manual carefully, to ensure you know how to ride
it in a safe way.

11
It is your responsibility to be aware of and comply with all regulations. If there are no
regulations for this Electric scooter in your country, please take care of your own safety
and the safety of others.
Also pay attention to other people. Always ride safely and only at a speed that allows you
to brake safely at any time. A common thing for such products is that there is a risk that
you may fall off the product and injure yourself. Always ride as safely as possible.
If lending the electric scooter to friends and family, please make sure they use proper
protective gear and know how to ride it.
Before riding the electric scooter, please check that all parts are working as supposed
to. If any loose parts, abnormal noise, reduced battery life etc. are detected, please
contact your retailer for product service and warranty. Do not repair the electric scooter
yourself.
Inspect the rear tire, rear brake, and brake pad according to Section 8 of the maintenance
specification in these operating instructions.
The electric scooter may become unstable if the rear brake is deformed or loose. This is
because the distance between the brake pad and the rear wheel becomes too small,
possibly leading to a blocked rear wheel.
As a result, the brake pad constantly touches the wheel, and the motor temperature
increases due to the additional resistance. The rear tire can also get loose if the brake is
in constant braking position.
Avoid applying too much force or stepping on the rear fender permanently. This may
cause the fender to loosen or damage the spring holding the fender. This is not covered
by the warranty.
Avoid constant braking. As a result, the tires will not only wear off, but also become hot.
This will soften the rubber and it will no longer have the same grip on the road as usual.
Do not touch the tire after braking.
If you hear unusual noises or notice friction when switching on the electric scooter, a
bearing may be damaged. A worn bearing may even be indicated by strong vibration of
the handlebar. In this case, please contact your retailer since the bearing needs to be
replaced and/or the handlebar checked and adjusted.

12
Ride the electric scooter only on a dry surface since otherwise the riding safety and
braking performance may be impaired and the motor or bearings may be damaged.
Please do not ride up or down long and steep slopes.
Stop riding when you receive the "Low Battery Warning". The electric scooter then moves
only slowly and does not have the same traction as normal, and the electric brake does
not work. In this case, please use the disc brake to stop the electric scooter.
Do not use the electric brake and the throttle at the same time.
A normally working Electric scooter operates safely and quietly. If you hear noises or
notice bumpy operation, please check wheels, bearings, and brakes. Contact your
customer service for repair and maintenance, if necessary.

13
8. Maintenance
As with any mechanical component, a vehicle is subject to high stresses and wear. The
various materials and components may react differently to wear or fatigue. If the
expected service life for a component has been exceeded, it may break suddenly,
therefore risking causing injuries to the user. Cracks, scratches, and discoloration in the
areas subject to high stresses indicate that the component has exceeded its service life
and should be replaced.
To ensure you get the best possible performance and experience from your electric
scooter, it is important to do regular maintenance for important parts of the product.
●Battery maintenance
●Bearings, Screws, Brakes and Wheels
●Storage and Cleaning
Your electric scooter will require some maintenance so please read and familiarize
yourself with this guide.
Battery maintenance
All batteries have a life cycle, and performance will decrease over time, however, here
are some advice to maximize the life span of the battery.
Make sure that the battery is charged at regular intervals, even if you do not use the
electric scooter for a long time. This is to prevent damage to the battery, caused by low
voltage over an extended period.
Avoid draining the battery completely. It is best to charge while there is still power on it.
This will extend battery life. If the battery is constantly depleted, it will damage the
battery (damaged battery caused by wrong handling are not covered by the warranty).
If riding the electric scooter in cold or very hot areas, the battery time can be lower than
when riding in temperatures from 15‐25° Celsius. This is not a failure on the batteries, but
normal behavior.
Please notice: Even a fully charged battery will run out of power if the electric scooter is
not used for a period. Expect a fully charged battery to keep power between 90 and 120
WARNING

14
days in off mode, before it is fully discharged. If only partially charged, this period is
lower.
Please make sure the battery does not get above 50° Celsius, or below minus 10° Celsius
for a longer period. (e.g., don’t leave the electric scooter in a hot car in summer, do not
put battery into fire etc.) Low temperature (e.g., subzero temperature) can damage the
battery cells.
Keep the Electric scooter away from open flame or other sources of heat to prevent the
battery from getting too hot. Also make sure not to leave the electric scooter at freezing
temperatures. Both heat and excessive cold can cause the battery to discharge.
Only use original charger or an official replacement, as different batteries may require
specific charger, and if using other chargers, this could cause damage to the product.
Do not overcharge and discharge the battery.
Please make sure to charge the battery before it is completely out of power, to avoid
damaging the battery cells. (Damaged battery caused by wrong handling is not covered
by the warranty)
It is forbidden to disassemble battery package. This is only to be handled by official
service repair centers and professionals.
Bearings, Screws, Brakes and Wheels
Your electric scooter is made up of moving parts, which in time, will be susceptible to
wear and tear.
Bearings and screws:
The electric scooter has sealed and dustproof bearings so that no lubrication is required.
Check the bearings for wear at regular intervals to avoid unsafe riding. Do not jump on
and off and do not apply excessive force otherwise to avoid damage to the bearings. This
is not a sports electric scooter.
Make sure that all screws are properly tightened to avoid unsafe situations. We
recommend tightening average value of 20N/m.
Please check the screws regularly and tighten if they seem loose.
Brakes:
Check the brake for wear at regular intervals to avoid unsafe riding. Do not apply
excessive force to avoid damage to the brake.

15
Electric scooter with disc brake will require adjustment over time and in the end will need
to be replaced, when worm down. Avoid using electric scooter when brakes are worn
down, as this is unsafe and will also damage the brake system.
Wheels:
Check the wheels for wear at regular intervals to avoid unsafe riding.
If the wheel seems wobbly even after screws are tightened, the bearings might
be worn down and need replacement.
WARNING
●Please make sure to check that the steering system is correctly adjusted and that all
connection components are firmly secured and not broken before riding, refer to
handle assembly and safety instruction.
●Please read operation guide and warnings of correct techniques for use and braking
●Always wear shoes.
●We highly recommend to always wear helmet/pads for your own protection.
●Self-locking nuts and other self- locking fixings may lose their effectiveness.
●All parts and materials of electric scooter cannot be changed, modifications of the
scooter are not allowed. If done, then warranty is void.
Storage and cleaning
If your Electric scooter gets dirty, please clean it with a damp cloth only, you may not use
pressured water‐gun or running water, as this could damage vital parts. It is also possible
to use a little toothpaste if the dirt is stuck. Remember to clean with damp cloth after
this.
Please make sure to keep the electric scooter turned off while cleaning it, and make sure
to cover the charging input to avoid problems with the electronics.
Make sure to dry the scooter with a towel, should it become wet.
Please notice: Do not use alcohol, gas, kerosene or other corrosive and volatile chemical
solvents. This can damage both the appearance and the internal structure of the electric
scooter.
Please store your Electric scooter in a dry and cool environment when not in use. Avoid
leaving it outdoors, as it is not made for storing in wet areas. Nor is it good to expose to
high temperatures caused by direct sun for a long time.

16
9. Operational control
9.1 Control and display
1. Lights activated symbol
2. Battery level
3. Speedometer
4. Gear modes
•ECO mode –This is the pedestrian mode. 6 km/h speed and front
light and rear light is flashing. This is on purpose and according to
the EU regulation.
•D mode - 15 km/h
•S mode –25 km/h

17
9.2 Button and speed transfer
Power on / Power off
Press and hold power button few seconds.
When scooter display is on you press one time on power button and light is on
or off.
Quick press power button 2 times and you change scooter gear. You can see
in display what gear mode you are in.
ECO: 6 km/h speed
D: 15 km/h speed
S: 25 km/h speed
You have to manually move the Electric scooter with your foot before the accelerator
button works.

18
9.3 Brakes
The scooter is built with 2 separate brakes.
1. Disc brake
2. Electronic brake
Breaking techniques:
If needing to brake, then we recommend doing it this way. First release the throttle and
then press the electronic brake. If harder braking is needed, then use the disc brake.
The braking distances will be extended during wet weather.
WARNING

19
10. Specification
Parameter
Range
Size
Folding size(mm)
1120*430*510
Unfolded Size(mm)
1120*430*1200
Quality
Max Vehicle Payload (kg)
120
Weight (kg)
24.2
Ride Condition
Age(Year)
14+
Electric scooter
Max. speed (horizontal riding)
(km/h)
25
Distance up to (km)
50
Terrain
Level and dry surface
Battery
Type: Li-ion battery
Nominal voltage (V)
46,8
Input voltage (V)
54.6
Battery capacity (mAH)
12500
Motor
Motor Power (W)
500
Emission sound pressure level
(DB)
Emissions < 70 db (A).
Power adapter
Rated input voltage(V)
100‐240
Rated output voltage(v)
54.6
Rated current (A)
2
Charging Time(h)
7
Electric scooter
Model: SEL-90100F
Input: 100V-240V~, 50/60Hz, 2A(Max)
Output: 54.6V 2A
Max Speed: 25 km/h
Weight: 24.2kg
Year Of manufacture: 2022
Max Vehicle Payload: 120kg
Battery: 48V/12.5Ah
Power Consumption: ≤ 500W
Always charge the electric scooter with the supplied power adapter: HLT-180I-5462000
DENVER A/S
Omega 5A Soeften DK-8382 Hinnerup
Denmark
www.denver.eu

20
11. Warnings
Risks of riding
First, learn safe riding before you ride the Electric scooter fast.
-Failure to observe, loss of control, falls, and violations of the rules can cause injuries.
-Speed and range depend on the rider's weight, terrain, temperature, and riding style.
-Wear a helmet and protective clothing when riding the Electric scooter.
-Read the operating instructions carefully before riding the Electric scooter.
-For use only in a dry environment.
-The Electric scooter may not be used on public roads unless local regulations approve
this.
-Make sure that this product complies with local regulations.
12. Electric scooter safe parking
Once you have stopped the Electric scooter, get off it and press the side stand down with
your right foot to support the Electric scooter. The side stand is located on the left-hand
side of the Electric scooter below the foot board. Before you ride again, push the side
stand back up so that it is parallel to the foot board.
13. Safe transportation
13.1 Preparation
-First, charge the battery completely.
-Wear a helmet, knee and elbow pads.
-Do not wear loose clothing or open laces that can get caught in the Electric scooter
wheels.
13.2 Weight restriction
Reason for the weight restriction:
●Ensuring the rider's safety
●Avoiding damage due to overload.
Maximum Vehicle Payload : 120kg.
WARNING
WARNING