Denver DVBT-41 User manual

Digital Set Top Box User Manual
DVBT-41
70G书纸 105*148mm

Remote control unit
1

Remote control unit
2
1. MUTE: Deactivating the sound on/off.
2. : Switching to the previously selected channel
3.TV MODE: Switch between PAL/NTSC colour encoding.
4.INFO: Displaying the current channel‘s reception data
5.EXIT:Exiting the menu or a menu option
6. -Switching to the next lowest channel space
- Moving the cursor down
- Move down in the zoomed picture.
- Switching to the next highest channel space
- Moving the cursor up
- Move up in the zoomed picture.
Shows the audio menu.
In various menus for activating the function displayed.
Switching to freeze-frame whilst watching television
In various menus for activating the function displayed.
9.SUBTITLE: Shows subtitles (if available).
10.TELETEXT: Activating teletext
In various menus for activating the function displayed.
11.TV/RADIO: Switching between radio and TV, if radio is available
Setting the OSD language.
In various menus for activating function.
13.OK: Confirming the menu or a menu option
Displaying the list of stations
lower volume.
menu option to the left.
- Move to the left in the zoomed picture.
- raise volume.
- menu option to the right.
- Move to the right in the zoomed picture.
15.MENU: Calling up the menu, carrying out basic settings
16.EPG: Electronic Programme Guide
17.DIGEST: Opening the “9 programme” window.
18.FAV: Calling up the list of favourites.
19.0~9: Directly selecting the channel, entering digits.
20.STANDBY : Switching on and switching to standby mode.
7.AUDIO:
GREEN:
8.PAUSE:
YELLOW:
BLUE:
12.LANGUAGE:
RED:
14. -
-

31/12/06 16:00
Move Move Exit
Edit
MANUAL SCAN
Strength 99%
Quality 46%
Channel N0. CH - 45
Bandwidth 8MHz
Frequency 666.000
Scan
Ok
Manual Scan Page
Clear database message
SETUP-Installation
Antenna Setting OFF
31/12/08 16:01
Country Setting Englend
OSD Language English
Andio Language English
Subtitle Language English
LCN ON
Move Swicth Exit
Auto Scan Manual Scan
Dstabase will be cleared Continue?
YES Exit
Ok
How to receive the programs: Scan the possible frequency and bandwidth to
receive the programs.
Auto Scan: Auto Scan will erase the database first, and scans default frequency
and bandwidth by Country Setting.
(1) Press <RED> button to be confirmed to clear the database.
(2) Press <OK> button to confirm the database will be cleared and start Auto Scan.
It costs time to do Auto Scan, user can press <exit> to exit at anytime.
Setting Language: User can select a preferred language among various
languages at Installation page. If there is no database (scan result) in the STB.
Quickly Scan
Installation Page
SETUP-Installation
Antenna Setting OFF
Country Setting Englend
OSD Language English
Andio Language English
Subtitle Language English
LCN ON
Move Swicth
31/12/08 16:01
Exit
Auto Scan Manual Scan
Main Menu, SETUP
SETUP
Installation
TV Setup
Password
Advance Timer
SW Update
Set Default
3

Message: There are some messages to inform user the current condition.
No Signal: STB can't get signal, for example, cable is disconnected.
No Service: Program doesn't have any content to play.
Service Scrambled: Program is scrambled for payment, contact the content
provider to know how to descramble it.
Antenna Overload: The power of antenna is overload.
HDTV not support: This STB doesn't support HDTV. If the program content is
HDTV, STB will display this message.
Locked: Program is locked by setting lock and turning on password setting.
User must input correct password to watch program.
Technical Specification
Power Supply
Input Voltage 110-240V AC 50/60 Hz.
Power Consumption Maximum 5W
Decoder
Video Formats SD,4:3/16:9 Switchable.
Audio Format MPEG Layer I&II,32/44.1/48Khz.
Video Output CVBS ,RGB(default)
Connection
Main Power Cable Fixed Type.
Tuner 1 Antenna Input/1 RF Output.
Scart 1 for TV.
Standby power <1W.
Manual Scan: Manual Scan adds the scanning results into database, it doesn't
erase the database. But User has to know the Frequency and Bandwidth for
scanning. If user scans the same Frequency and Bandwidth more than once, the
programs will be duplicated.
4