Dewenwils HODT21A User manual

SKU: HODT21A
[Instruction Manual]
Outdoor Light Sensor Timer
Please pay attention to the warning signs
Read the instructions with caution before operating
and keep it properly
V20718

1. Do not connect any devices which exceed the maximum ratings of the
timer.
2. Do not immerse in water.
3. Children are not allowed to use the timer without supervision.
4. Do not disassemble or repair the product, but only by authorized service
personnel.
5. Always unplug and store indoors when not in use.
WARNING
01
To reduce the risk of fire, electric shock or personal injury,
please strictly follow the instructions.
6.INSTALL THE CORD AND UNIT ABOVE
GROUND LEVEL AT LEAST 1.4 M WITH
THE RECEPTACLE FACING DOWNWARD.
7.SUITABLE FOR USE WITH OUTDOOR
APPLIANCES – RAINTIGHT WHEN MO-
UNTED VERTICALLY WITH THE RECE
PTACLE FACING DOWNWARD.
NOT FOR WATER IMMERSION.STORE
INDOOR WHEN NOT IN USE.

02
1. Timer dial: 2 to 8 hours or dusk to dawn and daily repeat function.
2. Power: Power indicator light indicates if the timer is turned on or off.
3. Sensor: Sensor will turn timer on at dusk and off at dawn.
4.1 Outlet: Plug the lights or device to be controlled by the timer into outlet.
Operating Instructions
Product Layout
2
4
1
3

Specifications
Notes
03
Safety Information
Input Voltage：
- 125V, 60Hz.
Max Power Rating：
- 125V, 60Hz, 1250W,
- 10A Resistance,
- 10A General Use,
- 1000W Tungsten,
- 500VA Electronic Ballast,
- 120Vac, 60Hz, 8.3A Ballast,
- 1/2HP.
Cord:
- SJTW 18/3 AWG.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate

04
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
One Year Limited Warranty
Supported by our professional R&D team and QC team, we provide One
Year Warranty for materials and workmanship from the purchase date.
Please note that the warranty does not cover damage caused by personal
misuse or improper installation.
Please attatch your Order ID and Name so that our dedicated customer
service team can help you better.