Dialog Semiconductor SmartBond DA14585 User manual

Invoke the app menu
and select “Sound”
to test the audio
functionality.
Install 2 AAA batteries
(not included) in the
battery enclosure. 2
3
DA14585 Voice RCU
Quick Start Guide
Install the Voice
RCU app from the
Google Play Store. 1
Trackpad sockets
Power switch
Make sure the power switch is in the POWER ON position.
Motion Mouse On
Motion Mouse Off
5
Press “#” on the RCU to toggle between the MOUSE
and KEYPAD mappings and test the keyboard.
6
ONOFF
‘#’ button
PTT
Push To Talk
LEDs
Revision 1.0
Run the app on your
mobile and use the Scan
screen to select and
connect your RCU. 4
RCU state Indication
RCU connected
Green LED blinks once
RCU disconnected
Green LED blinks 3 times
RCU advertising
Red LED is on for 0.5 second every second
Battery low
Red
LED blinks briefly every 2 seconds
Motion active
Green LED blinks once every second
The LEDs indicate the state of the RCU.

DA14585 Voice RCU
Quick Start Guide
Select the required
bitrate. When
"Automatic" is
chosen, the bitrate
adapts dynamically.
Let the language
be automatically
detected or
select among
English, Chinese,
Dutch, French,
German, Greek,
Italian, Japanese,
Korean, Russian,
and Spanish.
When "Live Capture"
is chosen, you may
attempt "Voice
Recognition" after the
audio is captured.
When "Voice
Command" is chosen,
you may opt to
automatically open
the first result that is
returned.
If the RCU disconnects,
the microphone will be
disabled. Press any key
on the RCU to
reconnect.
Press the microphone
button to start
capturing audio. Press
it again to stop
or
Press the PTT button
on the RCU and keep it
pressed to capture
audio. Release it to
stop.
You may use the disk
and play buttons to save
and play back the audio.
The bitrate is
updated while
audio is captured.
The graph is
updated while
audio is captured.
When "Voice Command" is
chosen, you may select
where to submit your
command or use
“Keyword” setting and
start your voice command
with one of “Google”,
“Movie”, “Web” or
“YouTube”.
This icon appears when
the RCU is paired.
Important notes
•Only one pointing device (such as mouse or
trackpad) should be paired
Revision 1.0