Digisol DG-FS1526HP User manual

DG-FS1526HP
Layer 2 Fast Ethernet Web Managed PoE Switch
User Manual
V1.0
2014-10-23
As our products undergo continuous development the specifications are subject to change without prior notice
AZTECA 1000 Web Managed Switch Series

DG-FS1526HP User Manual
2
COPYRIGHT
Copyright 2014 by Smartlink Network Systems Ltd. All rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language or computer language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written
permission of this company.
This company makes no representations or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties, merchantability or
fitness for any particular purpose. Any software described in this manual is sold or licensed
"as is". Should the programs prove defective following their purchase, the buyer (and not this
company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair,
and any incidental or consequential damages resulting from any defect in the software.
Further, this company reserves the right to revise this publication and to make changes from
time to time in the contents thereof without obligation to notify any person of such revision
or changes.
Trademarks:
DIGISOL™ is a trademark of Smartlink Network Systems Ltd. All other trademarks are the
property of the respective manufacturers.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it.
However, special attention must be paid to the dangers of electric shock and static electricity
when working with electrical equipment. All guidelines of this and of the computer
manufacturer must therefore be allowed at all times to ensure the safe use of the equipment.

DG-FS1526HP User Manual
3
Index
1 Precautions........................................................................................................................... 8
2 Overview................................................................................................................................9
2.1 Product Features......................................................................................................... 9
3 Technical Specifications....................................................................................................10
3.1 Environment Requirements..................................................................................... 10
3.2 Power Interface..........................................................................................................10
3.3 Power Consumption..................................................................................................10
3.4 Ethernet Interface...................................................................................................... 10
3.5 Physical Characteristics............................................................................................11
4 Device Installation and Description.................................................................................12
4.1 Preparation Before Installation................................................................................ 12
4.1.1 Package Contents.............................................................................................12
4.1.2 Optional Accessories and Tools......................................................................12
4.1.3 Choosing the Installation Location................................................................. 13
4.2 Hardware Description............................................................................................... 14

DG-FS1526HP User Manual
4
4.2.1 Front Panel.........................................................................................................14
4.2.2 Rear Panel......................................................................................................... 16
4.3 Electrical Setup.......................................................................................................... 16
4.3.1 Setting Up the Power Interface....................................................................... 16
4.3.2 Setting Up the Ethernet Interfaces................................................................. 16
5 Device Startup....................................................................................................................19
5.1 Check Before Power-On.......................................................................................... 19
5.2 Powering On the Device...........................................................................................19
6 Device Upgrade................................................................................................................. 19
7 Web Configuration and Management.............................................................................20
7.1 Preparation Before Login......................................................................................... 20
7.2 Logging In to the Switch........................................................................................... 21
7.3 System Management................................................................................................ 23
7.3.1 Authentication Configuration........................................................................... 23
7.3.2 System IP Configuration.................................................................................. 24
7.3.3 System Status....................................................................................................25

DG-FS1526HP User Manual
5
7.3.4 Loading Default Settings..................................................................................25
7.3.5 Firmware Update...............................................................................................26
7.3.6 Reboot the Device.............................................................................................26
7.4 PoE.............................................................................................................................. 27
7.4.1 PoE Status......................................................................................................... 27
7.4.2 PoE Setting.......................................................................................................... 28
7.4.3 PoE Power Delay.............................................................................................. 29
7.4.4 PoE Scheduling................................................................................................. 30
7.4.5 NTP Setting........................................................................................................31
7.5 Port Management...................................................................................................... 31
7.5.1 Port Configuration............................................................................................. 32
7.5.2 Port Mirroring..................................................................................................... 33
7.5.3 Bandwidth Control.............................................................................................35
7.5.4 Broadcast Storm Control..................................................................................37
7.6 VLAN Configuration.................................................................................................. 38
7.6.1 VLAN Mode........................................................................................................39

DG-FS1526HP User Manual
6
7.6.2 VLAN Member................................................................................................... 41
7.6.3 Multi to 1 Setting Configuration.......................................................................45
7.7 Per Port Counter........................................................................................................46
7.8 QoS Configuration.....................................................................................................48
7.8.1 Priority Mode......................................................................................................49
7.8.2 Class of Service Configuration - 1..................................................................50
7.8.3 Class of Service Configuration - 2..................................................................52
7.9 Security....................................................................................................................... 53
7.9.1 MAC Address Binding...................................................................................... 54
7.9.2 TCP/UDP Filter.................................................................................................. 55
7.10 Spanning Tree..........................................................................................................56
7.10.1 STP Bridge Settings....................................................................................... 57
7.10.2 STP Port Settings............................................................................................59
7.10.3 Loopback Detection........................................................................................61
7.11 Trunking.....................................................................................................................62
7.12 DHCP Relay Agent..................................................................................................66

DG-FS1526HP User Manual
7
7.12.1 DHCP Relay Agent......................................................................................... 66
7.12.2 Relay Server.................................................................................................... 67
7.12.3 VLAN MAP Relay Agent................................................................................ 67
7.13 Configuration Backup and Recovery....................................................................68
7.14 Miscellaneous Configuration................................................................................. 69
7.15 SNMP Settings.........................................................................................................70
7.16 Logout....................................................................................................................... 71
8 Troubleshooting..................................................................................................................72
9 Glossary.............................................................................................................................. 73

DG-FS1526HP User Manual
8
1 Precautions
Power supply sockets with too heavy load or broken cables and plugs may
cause electric shock or fire. Users should check the power supply wires and
cables regularly. If there is any breakage, please replace the cable at once.
Do not open the case of the device, especially during device power-on.
The device should be installed at position with good ventilation and without
high temperature or direct sunshine, so as to avoid faults of the device and its
corresponding components due to overheat.
Do not put this device close to a damp or watery place. Do not spill any fluid on
this device.
Keep proper space for heat dissipation, to avoid any damage to the device
caused by overheating. The holes on the shell are designed for heat dissipation,
to ensure that the device works normally. Do not cover the heat dissipation
holes.
Keep the power plug clean and dry, if abnormal phenomenon occurs, such as
smoke, abnormal sound, abnormal smell, switch off the power.

DG-FS1526HP User Manual
9
2 Overview
The DG-FS1526HP is an intelligent Layer 2 PoE Ethernet switch. It provides 24
10M/100M self-adaptive Ethernet ports and 2 gigabit combo ports. The combo ports can
be flexibly connected to gigabit copper cable or backbone fiber. You can select
1000BASE-LX, 1000BASE-SX or 1000BASE-T interface according to the transmission
distance. The DG-FS1526HP supports VLAN classification, SNMPv1, port mirroring, port
trunking and QoS. You can configure the device easily through web interface.
2.1 Product Features
24 10M/100M self-adaptive FE ports and 2 10M/100M/1000M self-adaptive
GE ports. 2 SFP slots are shared with GE ports. You can connect the switch to
other switches through copper cable or fiber.
Manage the switch through web page. Network administrator can monitor and
configure the switch through any Ethernet port.
Support the following standards: IEEE802.3, IEEE802.3u, IEEE802.3x and
IEEE802.1Q.
VLAN: Supports up to 32 Tag VLANs and up to 26 Port Based VLANs.
Supports 4K MAC addresses.
Other functions: CoS, broadcast storm control, port management, bandwidth
control, spanning tree protocol and simple network management.

DG-FS1526HP User Manual
10
3 Technical Specifications
3.1 Environment Requirements
The whole device can survive in a wide range of operating temperature and can work
normally and stably in a tough environment.
Operating temperature: 0˚C—40˚C
Storage temperature: -10˚C—70˚C
Relative humidity: 10%—90% (non-condensing)
Storage Relative Humidity: Maximum 95% (non-condensing)
3.2 Power Interface
Power input: 100V AC ~240V AC, 50/60Hz
3.3 Power Consumption
Whole device consumption: < 260 W
3.4 Ethernet Interface
Standard: IEEE802.3, IEEE802.3u and IEEE802.3x.
Transmission rate: Port 1 ~ Port 24 are 10 M/100 M self-adaptive. Port 25 ~ Port
26 are 10 M/100 M/1000 M self-adaptive.

DG-FS1526HP User Manual
11
Working mode: full duplex, half duplex, self-adaptive.
Port type:
–24 x 10/100Base-TX self-adaptive Ethernet ports.
–2 x 10/100/1000Base-TX self-adaptive Ethernet ports.
–2 x SFP fiber ports. They are shared with 10/100/1000Base-TX self-adaptive
Ethernet ports.
Transmission distance: < 100m, Cat. 3/5 UTP. The transmission distance of SFP
port is determined by optical module.
Auto-MDI/MDI-X. Automatically distinguish crossover cable from straight
through cable.
3.5 Physical Characteristics
Dimensions : 441(W) x 44(H) x 310(D) mm

DG-FS1526HP User Manual
12
4 Device Installation and Description
4.1 Preparation Before Installation
4.1.1 Package Contents
DG-FS1526HP Fast Ethernet PoE Switch.
Power Cord.
Bracket Mounting Kit
Installation Guide CD. (includes User Manual)
Four adhesive foot pads.
4.1.2 Optional Accessories and Tools
Screwdriver
ESD straps
Ethernet crimping pliers, 8P8C crystal heads
Ethernet (either crossover or straight through) cable

DG-FS1526HP User Manual
13
4.1.3 Choosing the Installation Location
The DG-FS1526HP can be installed in either of the following ways as required:
On the work platform
On a rack
4.1.3.1 Installing the DG-FS1526HP on the Work Platform
The common way is to install the DG-FS1526HP on a clean work platform. Pay attention
to the following precautions:
Ensure that the work platform is flat and stable.
Ensure good ventilation of air ports on both sides of the device.
Do not keep heavy objects on the device.
4.1.3.2 Installing the DG-FS1526HP on a Rack
Before installing the DG-FS1526HP on a rack, you need to install the provided L-Clamps
on both sides of the DG-FS1526HP.

DG-FS1526HP User Manual
14
4.2 Hardware Description
4.2.1 Front Panel
The following table describes the interfaces of the DG-FS1526HP.
Interface/Button Description
1~24 24 x RJ-45 Ethernet interfaces, 10 M/100 M self-adaptive.
25, 26
Two groups of fiber-copper combo ports. The copper ports are 10
M/100 M/1000 M self-adaptive Ethernet ports and the fiber ports
are SFP optical module ports. If the combo ports are preferred to
serve as fiber ports, that is, if the ports connect to a fiber port, the
copper port is disabled.
Reset
Keep the device powered on and push a paper clip into the hole.
Press down the button for about 5 seconds. The system restores the
factory default settings.

DG-FS1526HP User Manual
15
The following table describes the twenty-seven LED indicators of the DG-FS1526HP.
LED
Indicator
Color Status Description
Power Green
Off The power is off.
On The power is on.
1 ~ 24, 25, 26
Link/Act
Amber
Off The LAN interface is not connected.
Blinks Data is being transmitted.
On The network connection is established.
PoE Green
Off PoE power OFF.
On PoE power on.

DG-FS1526HP User Manual
16
4.2.2 Rear Panel
Interface Description
100-240VAC 50/60Hz
The power interface. The power input is 100 V ~ 240 V AC,
50 Hz ~ 60Hz.
4.3 Electrical Setup
4.3.1 Setting Up the Power Interface
After placing the DG-FS1526HP to a flat and stable surface, insert the supplied power
cable to the power socket, and connect the other end of the cable to the power interface of
DG-FS1526HP.
4.3.2 Setting Up the Ethernet Interfaces
The DG-FS1526HP provides twenty-four auto-MDI/MDI-X Ethernet service interfaces of
standard RJ45 connectors. You can use either the crossover or straight through cable to
connect an interface.
The following figure describes the line sequence of Ethernet cable:

DG-FS1526HP User Manual
17
Figure 1 Pin out of Ethernet interfaces
Crossover cable: Refer to 0 to connect one end of the network cable. Refer to 0 to connect
the other end.
Straight-through cable: Refer to 0 to connect both ends of the network cable.
Table 1. Pin out of RJ-45 straight-through cable
No. Definition Color
1 TXD+ Orange and white
2 TXD- Orange
3 RXD+ Green and white
4 - Blue
5 - Blue and white
6 RXD- Green
7 - Brown and white

DG-FS1526HP User Manual
18
No. Definition Color
8 - Brown
Table 2. Pin out of RJ-45 crossover cable
No. Definition Color
1 RXD+ Green and white
2 RXD- Green
3 TXD+ Orange and white
4 - Blue
5 - Blue and white
6 TXD- Orange
7 - Brown and white
8 - Brown
Note: To ensure good quality of the data signal, the length of the network cable
connected to the Ethernet interface should be shorter than 100m.

DG-FS1526HP User Manual
19
5 Device Startup
5.1 Check Before Power-On
Before powering on the device, check the following:
Whether the voltage of the power supply is consistent with the power
requirement of the device.
Whether the power cable is correctly connected.
Whether the device is correctly connected to the ground on the rear side.
5.2 Powering On the Device
After connecting the power cable, turn on the power switch. When the Power indicator
turns on, the system starts to initialize. When other indicators blink three times and the
Power indicator is always on in green, the power works normally.
6 Device Upgrade
You can upgrade software through any Ethernet port for DG-FS1526HP. After software
upgrade is complete, the system reboots automatically.

DG-FS1526HP User Manual
20
7 Web Configuration and Management
The system does not support the CLI management. It supports the web management only.
This section describes the web configuration and management.
7.1 Preparation Before Login
Before accessing the switch, ensure the communication between PC and switch is normal.
Check the communication as follows.
1. Set the IP address of the PC to 192.168.2.X (2~254) and the subnet mask to
255.255.255.0.
2. Enter arp -d or arp -d 192.168.2.1 in the DOS window. See the following figure.