Digital Monitoring Products XR150 User manual

System User Guide
XR Series Canadian Control Panel

HOW TO HANDLE AN ALARM
Enter your user code or present your credential to the keypad if it has a
built-in proximity reader. You will see:
IS THIS A FALSE ALARM? YES NO or CANCEL VERIFY
Real Alarm
Press NO or VERIFY to notify to the emergency monitoring station.
Your system will remain armed.
False Alarm
Press YES or CANCEL to cancel the alarm.
Your system will disarm.

TABLE OF CONTENTS
Get to Know Your System ...................................... 1
Use Your Keypad .....................................................3
LCD Keypad ...................................................................................... 3
Graphic Touchscreen Keypad .................................................... 3
Enter Characters In Your Keypad......................... 5
Number Pad...................................................................................... 5
Know Your System Type........................................ 6
Area (A).............................................................................................. 6
All/Perimeter (All Perim)............................................................. 6
Home/Sleep/Away (with Guest)............................................... 6
Arm Your System .....................................................7
Area (A)...............................................................................................7
All/Perimeter (All Perim)..............................................................7
Home/Sleep/Away (H S A)..........................................................7
More Arming Options ....................................................................7
Disarm Your System ............................................... 8
How to Handle an Alarm.............................................................. 8
Disarm Your System....................................................................... 8
User Menu................................................................ 9
Alarm Silence ................................................................................... 9
Sensor Reset..................................................................................... 9
Lockdown .......................................................................................... 9
Door Lock/Unlock.........................................................................10
Door Access.....................................................................................10
Armed Areas....................................................................................10
Outputs On/O ..............................................................................10
Favorites............................................................................................. 11
Z-Wave Setup..................................................................................12
Wi-Fi Setup ......................................................................................13
Zone Status...................................................................................... 13
Bypass Zones ..................................................................................14
Zone Monitor ...................................................................................14
System Status .................................................................................14
System Test ......................................................................................14
User Profiles.....................................................................................15
User Codes.......................................................................................17
Ambush Code .................................................................................18
Schedules..........................................................................................19
Time ...................................................................................................20
Display Events.................................................................................21
Service Request..............................................................................21
Fire Drill .............................................................................................21
Appendix ............................................................... 22
User Authority Descriptions..................................................... 22
Common Keypad Displays ........................................................ 23
Glossary ................................................................. 24
Notes ...................................................................... 25

System User Guide | XR150/XR550 Canadian 1
GET TO KNOW YOUR SYSTEM
Control Panel
The control panel acts as your system’s brain. It communicates with the keypad and all the other
system devices throughout the building.
Keypad
The keypad allows you to control your system from one place. You can use it to arm and disarm
your system, add user codes, verify alarms, and many other functions.
Prox Key
A prox key is an impact resistant credential that fits on a standard key ring. It allows for codeless
arming, disarming, and door access when it is presented to a reader.
Sensor
Sensors are small devices that monitor motion, temperature, flooding, breaking glass, and know
when windows and doors have been opened.
Key Fob Remote
Depending on how your key fob remote is set up, it provides an easy way to arm and disarm your
system or send a panic alarm.
Your system may not include all of the equipment and functions found in this guide.
FRI 2: 52 PM
1 2 3 4
5 6 7 8
9 0 CMD
A
C
B
D
F
E
G
I
H
J
L
K
V
X
W
S
U
T
P
R
Q
M
O
N
Y
Z
E
N
T
E
R
B
A
C
K
TODAY
WEDNESDAY
82
98 77
CURRENT
HI LO
85 68
HI LO
98 77
Options
Keypad
User Codes
Schedules
DISARMED

2 XR150/XR550 Canadian | System User Guide
Siren
The siren emits sound when your system goes into alarm.
Smoke and Carbon Monoxide (CO) Detector
These detectors notify you when smoke or carbon monoxide is present. Some detectors have an
integrated synchronized sounder. If they are installed in groups, they will all sound simultaneously.
Z-WaveTM
Z-Wave devices allow you to control the lights, small appliances, garage doors, thermostats, and locks
from the keypad, Virtual KeypadTM App, and VirtualKeypad.com.
SecureComTM Video
SecureCom Video allows you to add wired or wireless cameras inside or outside the building. You can
easily record clips or view live video feed at any time using the Virtual Keypad App or VirtualKeypad.com.
Virtual Keypad App and VirtualKeypad.com
The Virtual Keypad App and VirtualKeypad.com allow you to control and monitor your system on the go.
The app is available for Apple® and Android™ devices.

System User Guide | XR150/XR550 Canadian 3
USE YOUR KEYPAD
Proximity Card Reader
The keypad may have a built-in proximity card reader that allows you
to arm or disarm your system when you present a credential.
Power and Armed LEDs
The AC Power and Armed LEDs indicate your system’s power and
armed status.
Select Keys
Use the select keys to type and navigate in the keypad. See Enter
Characters In Your Keypad for more information.
7/0 Panic Feature (Hardwired systems only)
Press and hold the 7and 0keys at the same time to send a fire,
emergency, or panic report to the emergency monitoring station.
TO DAY
WEDNESDAY
82
98 77
CURRENT
HI LO
85 68
HI LO
98 77
Options
Keypad
User Codes
Schedules
DISARMED
Power/Armed LEDs Proximity Card
Reader
Navigation
Arrows
Interactive
Shield
Local
Weather
Carousel
Menu
Power/Armed
LEDs FRI 2: 52 PM
1 2 3 4
5 6 7 8
9 0 CMD
A
C
B
D
F
E
G
I
H
J
L
K
V
X
W
S
U
T
P
R
Q
M
O
N
Y
Z
E
N
T
E
R
B
A
C
K
Proximity
Card Reader
Select Keys
LCD Keypad Graphic Touchscreen Keypad
Options
On the LCD keypad, press and hold the CMD and back arrow keys
at the same time to access the Options Menu. On the Graphic
Touchscreen Keypad, press Options in the carousel menu. From here,
you can adjust the keypad brightness, tone, and volume.
Interactive Shield
On the Graphic Touchscreen Keypad, press the shield to display
your arming options. Disarm your system by pressing the shield and
entering your user code.
Carousel Menu
On the Graphic Touchscreen Keypad, use the navigation arrows or
press and drag to scroll through the carousel menu options.

4 XR150/XR550 Canadian | System User Guide
Carousel Menu Options for Graphic Touchscreen Keypads
Panic Press Police, Emergency, or Fire to send a panic report to the emergency monitoring station.
Chime Press Chime to turn the chime feature on and o. If chime is on, the keypad will sound an alert and
display a notification when external doors and windows (with sensors installed) are opened.
Reset Press Reset to reset fire and panic sensors after they have triggered an alarm.
Favorites Favorites displays a list of your Z-Wave favorites. Press a Favorite to activate it.
Easy Exit When your system is armed, press Easy Exit to allow you to leave through an exit door without
triggering the alarm or needing to disarm and re-arm your system.
Options Press Options to display the Setting Options screen. From here, you can adjust the keypad screen
brightness, tone, and volume. You can also choose what you want to display in the carousel menu.
Keypad Press Keypad to display a standard DMP keypad. Use this option to access the User Menu. See Enter
Characters In Your Keypad for more information.
User Codes Press User Codes to add, edit, or delete user codes in your system.
Schedules Press Schedules to add, edit, or delete schedules. You can also use it to assign schedules to outputs and
favorites, as well as auto-arming and auto-disarming.
Events Events allows you to view up to 12,000 past events that occurred on your system over the last 45 days.
Thermostats Press Thermostats to display the Z-Wave thermostats screen. From here, you can adjust the temperature
or select ON, OFF, HEAT, COOL, or FAN.
Doors Press Doors to lock or unlock Z-Wave locks. You can also open and close Z-Wave-equipped
garage doors.
Lights Press Lights to turn ON, turn OFF, or DIM Z-Wave lights.

System User Guide | XR150/XR550 Canadian 5
1. Choose your letter or symbol from the table.
2. Identify the Number the letter correlates with and press it on
the keypad.
3. Identify the Select Key or Area for that letter and press that
select key or area on the keypad.
4. When your letter displays on the keypad, return to Step 1 to
enter another letter or press CMD if finished.
ENTER CHARACTERS IN YOUR KEYPAD
Number Pad
NUMBER
KEY
SELECT KEY OR AREA
12 3 4
1A B C (
2D E F )
3G H I !
4J K L ?
5M N O /
6P
Q
R &
7S T U @
8V W X ,
9Y Z space _
0- . * #
1 2 3 4
5 6 7 8
9 0 CMD
ABC DEF GHI JKL
MNO PQR STU VWX
YZ
1 2 3 4
5 6 7 8
9 0 CMD
A
C
B
D
F
E
G
I
H
J
L
K
V
X
W
S
U
T
P
R
Q
M
O
N
Y
Z
E
N
T
E
R
B
A
C
K
Graphic Touchscreen Keypad
Select Areas
LCD Keypad
Select Keys
Key
1
Key
2
Key
3
Key
4
Area
1
Area
2
Area
3
Area
4

6 XR150/XR550 Canadian | System User Guide
KNOW YOUR SYSTEM TYPE
Your system operates in one of the following ways: Area,
All/Perimeter, Home/Sleep/Away, or Home/Sleep/Away with Guest.
Regardless of which system type you have, much of the operation is
similar. The best way to identify your system type, is to arm it.
On an LCD Keypad, press CMD until ARM DISARM display, then press
the select key under ARM. The arming options display. Identify your
system type, then press the back arrow to exit the arming screen.
On a Graphic Touchscreen Keypad, touch the interactive shield and
the arming options display. Identify your system type, then press the
shield at the top of the keypad to exit the arming screen.
Area (A)
Your system can have up to 32 separate areas for an XR550 control
panel and up to 8 separate areas for an XR150 control panel. Each
area can do the following:
▸It can have a custom name.
▸It can arm or disarm independently of other areas.
▸It can limit access to users.
The building is divided into 2 main areas:
All
▸Arms both the perimeter and the interior of the building.
▸Use when you’re leaving the building and no one remains
inside.
Perimeter
▸Arms just the perimeter of the building.
▸Use when you’re staying inside the building.
The building is divided into 2 or 3 areas: perimeter, interior, and
bedrooms. For guest systems, you can have up to 2 guest areas.
Home
▸Arms the perimeter of the building.
▸Use when you’re staying in the building.
Sleep
▸Arms the perimeter and a portion of the interior.
▸Use to leave the bedroom areas of the building unarmed.
Away
▸Arms the perimeter, interior, and bedrooms.
▸Is used when you’re leaving the building and no one remains
inside.
All/Perimeter (All Perim)
Home/Sleep/Away (with Guest)

System User Guide | XR150/XR550 Canadian 7
1. Press and release the shield on a Graphic Touchscreen
Keypad to open the arming options screen or press CMD on
an LCD Keypad until ARM DISARM displays.
2. Select ARM. The keypad displays ALL? NO YES.
3. To arm all areas, select YES. To arm selected areas, select NO.
The keypad displays each area you have access to. Select YES
to arm the areas and NO to leave the area disarmed.
ARM YOUR SYSTEM
1. Enter your user code and the keypad displays PERIM ALL.
2. Select ALL to arm all areas. The keypad displays ALL SYSTEM
ON.Select PERIM to arm only the perimeter. The keypad
displays PERIMETER ON.
1. Enter your user code and the keypad displays H S A.
2. Select HOME if you’re staying inside the building, leaving the
interior disarmed and arming the exterior. Select SLEEP to
leave the bedroom areas disarmed, arming the interior and
exterior areas. Select AWAY if no one will remain inside the
building. Select GUEST to arm the guest areas.
Instantly Arm Your System
1. Press and release the shield on a Graphic Touchscreen Keypad
to open the arming options screen or press CMD on an LCD
keypad until ARM DISARM displays.
2. Select INSTANT. This overrides the entry and exit delay,
instantly arming your system.
Use the Keypad Shortcut Keys
The LCD Keypad and the Graphic Touchscreen Keypad provides
one-button shortcut keys. Press the key for two seconds until a
tone sounds.
KEY OPERATION
1
Arm Away for Home/Sleep/Away systems
Arm Away for Home/Sleep/Away with Guest systems
Arm All for All/Perimeter systems
2Fire and Panic Sensor Reset on all systems
3Arm Home for Home/Sleep/Away systems
Arm Home for Home/Sleep/Away with Guest systems
5Monitor (Chime) on all systems
6Arm Perimeter for All/Perimeter systems
7Arm Sleep for Home/Sleep/Away systems
Arm Sleep for Home/Sleep/Away with Guest systems
8Easy Exit for Home/Sleep/Away systems
Area (A)
All/Perimeter (All Perim)
Home/Sleep/Away (H S A)
More Arming Options

8 XR150/XR550 Canadian | System User Guide
Bypass Zones
If a problem exists on any zone, the zone name and problem
display, followed by OK BYPASS STOP.
▸Press OK to force arm the zone. The zone will re-arm when
it’s restored.
▸Press BYPASS to ignore the zone before arming. Panic,
emergency, fire, flood detector, and temperature sensor zones
cannot be bypassed.
▸Press STOP to stop your system from arming. This allows
you to correct the zone, return to the keypad, and restart the
arming process.
Extend Schedules
When a schedule is active, you can extend the schedule to a later
time. When arming your system, the keypad displays LATE or
CLOSING TIME!.
1. Press any select key or area. The keypad displays ENTER
CODE:-.
2. Enter your user code and press CMD or present your
credential to a card reader.
3. The keypad displays 2HR 4HR 6HR 8HR. Select the number of
hours to extend the schedule.
DISARM YOUR SYSTEM
Enter your user code or present your credential to the keypad if it
has a built-in proximity reader. You will see:
IS THIS A FALSE ALARM? YES NO or CANCEL VERIFY
Real Alarm
Press NO or VERIFY to notify the emergency monitoring station.
Your system will remain armed.
False Alarm
Press YES or CANCEL to cancel the alarm. Your system will
disarm.
1. Press the shield on the Graphic Touchscreen Keypad and
enter your user code to disarm your system or press CMD on
the LCD Keypad until ARM DISARM displays.
2. Select DISARM. The keypad displays ALL? NO YES.
3. Select YES to disarm all areas. Select NO to disarm individual
areas and select YES to disarm the area or NO to leave the
area armed.
How to Handle an Alarm
Disarm Your System

System User Guide | XR150/XR550 Canadian 9
Access the User Menu
1. Press CMD until MENU? NO YES displays.
2. Select YES.
3. Enter your user code and press CMD.
USER MENU
Alarm silence turns o your bells and sirens when your system is in
alarm. It does not stop a report from being sent to the emergency
monitoring station.
Silence an Alarm:
1. Access the User Menu.
2. At ALARM SILENCE?, press any select key or area to silence
the bells or sirens.
You have access to many functions in the User Menu that can be
accessed from the keypad. Enter your user code and the functions
you have access to, display. The User Menu allows you to create user
profiles, add, change, and delete user codes, create favorites with
your Z-Wave devices, and more.
Below are the User Menu functions and their processes as you will
see them on the keypad. Before using a function, you will need to
access the User Menu. See Access the User Menu below.
Sensor Reset resets panic and fire sensors after they have been
tripped. They must be reset before they can detect any additional
alarm conditions.
Reset All Sensors
1. Access the User Menu.
2. Press CMD until SENSOR RESET? displays.
3. Press a top row select key or area. The keypad displays
SENSORS OFF followed by SENSORS ON.
Reset your fire sensor
Press 2for two seconds then enter your user code.
Activate lockdown to immediately lock all public doors connected to
your system.
Activate Lockdown
1. Access the User Menu.
2. Press CMD until LOCKDOWN? displays.
3. Press any select key or area to lock all public doors.
Alarm Silence
Sensor Reset
Lockdown

10 XR150/XR550 Canadian | System User Guide
Use this function to lock or unlock individual doors from the keypad.
Lock or Unlock Your Doors
1. Access the User Menu.
2. Press CMD until DOOR LOCK/UNLOCK? displays.
3. Press a top row select key or area. Enter the door number and
press CMD or select LIST to browse doors.
4. Press the select key or area over the desired option.
Door access is granted when an authorized credential is presented
to a door access reader. The door momentarily unlocks, allowing the
user to enter, then re-locks.
Enable Door Access:
1. Access the User Menu.
2. Press CMD until DOOR ACCESS? displays.
3. Press any select key or area to allow momentary access.
Use this function to list your system’s areas that are currently armed.
Display Armed Areas
1. Access the User Menu.
2. Press CMD until ARMED AREAS? displays.
3. Press any select key or area. Press CMD to advance through
the list of armed areas.
Use this function to individually turn your system’s outputs on and
o. Your system may use outputs to control door access, interior and
exterior lighting, heating, air conditioning, and other appliances.
Turn Outputs On and O
1. Access the User Menu.
2. Press CMD until OUTPUTS ON/OFF displays.
3. Press any select key or area.
4. Enter the output number, then select ON or OFF.
Door Lock/Unlock
Door Access
Armed Areas
Outputs On/Off

System User Guide | XR150/XR550 Canadian 11
▸Select ON or OFF to turn a device on or o.
▸Select DIM, enter the dim level (1-10) of the device, and
press CMD.
Doors
▸Doors: Press the select key or area for the desired setting
when SETTING: LOCK UNLOCK displays
▸Garage Doors: Press the select key or area for the desired
setting when SETTING: OPEN CLOSE displays.
Thermostats
Press the select key or area for the desired setting when
SETTING: OFF CL HT displays.
O
1. Select OFF to display FAN SETTING:.
2. Press any select key or area. When ON AUTO displays,
press the select key for the desired option.
Cool
1. Select CL and press any select key or area.
2. Enter the new temperature and press CMD.
Heat
1. Select HT then press any select key or area.
2. Enter the new temperature and press CMD.
Remove Devices in a Favorite
1. Select REMOVE then press CMD to view your devices.
2. When the desired device displays, press any select key or area
to remove that device.
3. Select YES when REMOVE DEVICE FROM FAV? NO YES
displays.
Favorites are preset combinations that allow you to quickly activate
multiple Z-Wave devices at once. You can create a Favorite that turns
down your thermostat, turns o your lights, and locks your front
door when you leave the building. You can add up to 25 devices to a
Favorite.
Begin Here
1. Access the User Menu.
2. Press CMD until ZWAVE SETUP? displays.
3. Press any select key or area. The keypad displays ADD LIST
REMOVE. Press CMD to display FAV XFER OPT.
4. Select FAV. At FAVORITE NUMBER:, enter a number between
1 and 20 and press CMD. ADD EDIT REMOVE display.
Add Devices to a Favorite
1. Select ADD.
2. Press CMD to browse your Z-Wave devices.
3. Press any select key or area to assign a device to a Favorite.
Edit Devices in a Favorite
1. Select EDIT.
2. Press CMD to browse your Z-Wave devices.
3. Press any select key or area to view a device’s settings. Refer
to the Lights, Doors, and Thermostat sections on this page to
edit your devices.
Lights
Press the select key or area for the desired setting when
SETTING: ON OFF DIM displays.
Favorites

12 XR150/XR550 Canadian | System User Guide
Z-Wave technology adds home automation to your system.
Using Z-Wave, you can control lights, locks, small appliances,
and thermostats from your keypad, Virtual Keypad App, or
VirtualKeypad.com,. You can add up to 140 Z-Wave devices to your
system.
Begin Here
1. Access the User Menu.
2. Press CMD until ZWAVE SETUP? displays.
3. Press any select key or area. The keypad displays ADD LIST
REMOVE. Press CMD to display FAV XFER OPT.
Add a Z-Wave Device
1. Select ADD.
2. Press the button on the Z-Wave device when PRESS BUTTON
ON DEVICE TO ADD displays on the keypad.
3. Press CMD when DEVICE FOUND displays.
4. Press any top row select key or area and name the device.
5. Press CMD to save the device.
List Z-Wave Devices
1. Select LIST and DEVICE LIST displays.
2. Press CMD to advance through the list of Z-Wave devices.
3. Press any select key or area to display DEVICE RENAME
STATUS.
4. Select RENAME and name the device then press CMD.
Remove a Z-Wave Device
1. Select REMOVE.
2. Press the button on the Z-Wave device when PRESS BUTTON
ON DEVICE TO REMOVE displays on the keypad.
Status of a Z-Wave Device
1. Select LIST and DEVICE LIST displays.
2. Press CMD to advance through the list of Z-Wave devices.
3. Press any select key or area to display DEVICE RENAME
STATUS.
4. Select STATUS. The device name and OKAY display when the
device communicates. The device name and FAILED display if
the device stored in the system does not communicate.
5. Press CMD and REMOVE FAILED DEVICE displays.
6. Select YES to remove the failed device from your system.
Select NO to leave the device in your system.
Transfer Controller Operation
Use this function to transfer and replace your existing Z-Wave
device information with information from another system.
1. Select XFER. The keypad warns you that transferring Z-Wave
device information deletes all your Z-Wave devices connected
to your system.
2. Select YES to proceed.
3. Initiate the transfer at the other manufacturer’s Z-Wave
portable controller. ZWAVE SETUP? displays.
Optimize Z- devices
1. Select OPT. The keypad displays OPTIMIZE SUCCESS when
communication with a Z-Wave device is established.
Z-Wave Setup

System User Guide | XR150/XR550 Canadian 13
Use this function if your system is connected through Wi-Fi.
Begin Here
1. Access the User Menu.
2. Press CMD until WIFI SETUP? displays.
3. Press any select key or area and the keypad displays WPS
LIST MANUAL. Press CMD to display TEST.
Use WPS to Connect Your System
1. Press the WPS button on your Wi-Fi router.
2. Select WPS on your keypad and SEARCHING displays.
3. When WPS is successful, CONNECTED displays on your
keypad. If WPS was not successful, WPS FAILED RETRY? NO
YES displays.
4. Press YES to retry. Press NO and WPS LIST MANUAL
displays.
List the Available Networks
1. Select LIST and SEARCHING displays.
2. Press CMD to view the available Wi-Fi networks.
3. When the desired network displays, press any select key pr
area to connect. W/L KEY:**************** displays.
4. If the system is unable to detect the security type, press
any select key or area on the keypad and WEP WPA NONE
displays. Select the desired security type and enter your
network password. See Enter Characters In Your Keypad.
Manually Connect Your System
1. Select MANUAL.
2. Enter the name of your Wi-Fi network and press CMD. W/L
KEY:**************** displays.
3. If the system is unable to detect the security type, press
any select key or area on the keypad and WEP WPA NONE
display. Select the desired security type then enter your
network password. See Enter Characters In Your Keypad.
Test the Network Connection
Select TEST. When the test is successful, CONNECTED displays. If
the test is unsuccessful, NOT CONNECTED displays.
Wi-Fi Setup
Zone status allows you to check the status of each zone, displaying a
list of armed, bypassed, and alarmed zones.
Check Zone Status
1. Access the User Menu.
2. Press CMD until ZONE STATUS? displays.
3. Press any select key or area to display ARM BYPS ALR NBR.
▸Select ARM for a list of currently armed zones.
▸Select BYPS for a list of currently bypassed zones.
▸Select ALR for a list of currently alarmed zones.
▸Select NBR to find a specific zone number.
4. Select the desired option and the zones related to that option
display with a zone status of OKAY , BYPS, or BAD.
Zone Status

14 XR150/XR550 Canadian | System User Guide
Follow these steps to bypass a zone from the User Menu. Fire, panic,
emergency, supervisory, and 24-hour zones cannot be bypassed.
1. Access the User Menu.
2. Press CMD until BYPASS ZONES? displays.
3. Press any select key or area. The keypad displays ZONE: -
RST BYPS.
4. To bypass a zone, enter the zone number and select BYPS.
The zone number automatically disappears and a new zone
number can be entered. Refer back to step 3.
5. To reset a zone, enter the zone number and select RST.
If a door or window is opened when the system is disarmed, the
keypad sounds a chime and displays the zone on the keypad.
Activate/Deactivate Chime
On a graphic touch keypad, select Chime in the carousel menu.
On an LCD keypad, press and hold 5.
Activate Zone Monitor
1. Access the User Menu.
2. Press CMD until ZONE MONITOR? displays.
3. Press any select key or area and the keypad displays ALL
NBR or PERIM ALL NBR. Select the desired option.
▸Select ALL to add or remove devices from zone monitor.
▸Select NBR to enter a specific zone number.
▸Select PERIM to monitor all Night and Exit zones.
This option allows you to check the current status of your system.
Check Your System’s Status
1. Access the User Menu.
2. Press CMD until SYSTEM STATUS? displays.
3. Press any select key or area. Press CMD to advance through
the system status list. If TRBL displays, call your service
department for assistance.
Test Your System
1. Access the User Menu.
2. Press CMD until SYSTEM TEST? displays and press any select
key or area.
3. At SYSTEM ZONES, select SYSTEM. The system test
automatically begins.
Test Your Zones (XR550E only)
Burglary Zones
1. Select ZONES.
2. The keypad displays BURG PANICS.
3. Select BURG and manually trip each burglary zone.
4. Select END to stop the test. BURG TEST OKAY displays
when the test is complete and all zones tested okay.
Bypass Zones
Zone Monitor
System Status
System Test

System User Guide | XR150/XR550 Canadian 15
Panic Zones
1. Select ZONES.
2. The keypad displays BURG PANICS.
3. Select PANICS and the manually trip each burglary zone.
4. Select END to stop the test. PANIC TEST OKAY displays
when the test is complete and all zones tested okay.
Profiles define the authorities for each user code in the system.
Each user can be assigned up to four profiles. Ensure at least
one administrator on your system has a profile assigned with all
authorities and all areas.
User Profile Options Table
Use the User Profile Options table below to familiarize yourself on
how to create a user profile.
User Profile Options
Profile Number Assign each profile a specific number
from 1-99.
Profile Name Assign each profile a name.
Arm/Disarm Areas Assign each profile specific areas to
arm and disarm.
Access Areas Assign each profile door access
assignments.
Output Group Assign each profile an output group
number from 1-10.
User Menu Assignments
Assign each profile specific
authorities. See the User Profiles
Chart.
Predefined User Profiles Table
The Predefined User Profiles table oers predefined profiles,
making it easier for you to create profiles for your users. Each
profile can be tailored to your specific needs. Navigate to the
Appendix for descriptions of each user authority.
User Profiles

16 XR150/XR550 Canadian | System User Guide
PREDEFINED USER PROFILES
AUTHORITY MENU DISPLAY PREDEFINED PROFILE NUMBER
1 2 3 4 5 6 7 8 9 10 11-98 99
Alarm Silence ALM SLNC N Y Y Y Y Y Y Y Y N N Y
Sensor Reset SNSR RST Y Y Y Y Y Y Y Y Y N N Y
Lockdown LOCKDOWN Y Y Y Y Y Y Y Y Y Y N Y
Door Lock/Unlock DR UNLOCK Y Y Y Y Y Y Y Y Y Y N Y
Door Access DOOR ACS Y Y Y Y Y Y Y Y Y Y N Y
Armed Areas ARM AREA Y Y Y Y Y Y Y Y Y N N Y
Outputs On/O OUTPUTS N N N N Y Y Y Y Y N N Y
Zone Status ZN STATS YYYYYYYYYNNY
Bypass Zones BYPAS ZN N N N N N Y Y Y Y N N Y
Zone Monitor ZONE MON N N N Y Y Y Y Y Y N N Y
System Status SYS STAT YYYYYYYYYNNY
System Test SYS TEST N N N Y Y Y Y Y Y N N Y
User Profiles PROFILES N N N N N N N N Y N N Y
User Codes USR CODE N N N N N N N N Y N N Y
Extend Schedules EXTEND N N N N N Y Y Y Y N N Y
Schedules SCHEDULS N N N N N N Y Y Y N N Y
Time TIME N N N N N N N Y Y N N Y
Display Events DIS EVNT Y Y Y Y Y Y Y Y Y N N Y
Service Request SERV REQ N N N N N N N Y Y N N Y
Fire Drill FIRE DRIL N N N N N N N Y Y N N Y
Temporary User Code TEMPCODE NNNNNNNNNNNN
Anti-Passback ANTIPASS NNNNNNNNNNNN
Access Time ACCESS SCHEDULES - - - - - - - - - - - -
Re-Arm Delay RE ARM DELAY (0-720) N N N N N N Y Y Y N N Y
Arm/Disarm EASY ARM/DISARM N N N N N N N N N N N N
Preferred Language SEC LANGUAGE N N N N N N N N N N N N
Card Plus Pin CARD PLUS PIN N N N N N N N N N N N N
Wi-Fi Setup WIFI SETUP N N N N N N N N Y N N Y
Technician User TECHNICIAN USER N N N N N N N N N N N N
Inactive User Audit Days INACTIVE USER AUDIT - - - - - - - - - - - -