Dinstar DAG2000-16S User manual

Thanks for Choosing Dinstar’s DAG2000-16S VoIP Gateway!
Please read this installation guide carefully before install the gateway. If you need any technical
support, please contact us.
Tel: [phone].
Email: [e-mail]
Website: www.dinstar.com
DAG2000-16S Appearance
Number of Ports
1
2

Description of Indicators
3
客户至上 贴心服务
十年专注 铸就品质
1. Please separate power cables with telephone lines so as to reduce the
interference with telephone calls.
2. The adapter of DAG2000-16S accepts AC input voltage of 100-240V. Please ensure stable
and safe power supply.
3. To guarantee stabilized running of DAG2000-16S, please ensure there is enough network
bandwidth.
4. To ensure the gateway can work normally, you’d better install the gateway in a device
room where temperature and humidity are appropriate.
5. You’d better place the gateway on a flat surface or a device cabinet. To effectively
maximize heat dissipation, do not pile up the gateway with other devices .
Installation Attentions
4

Connection Instruction
Network Connection
Telephone Connection
Power Connection & Grounding
5
Modify PC’s IP Address
Modify the IP address of PC to make it at the same network segment with the DAG2000-16S gateway,
since the default IP address of the gateway is 192.168.11.1.
(1) On the PC, click “Network Properties”.(2) Double-click “Internet Protocol (TCP/IPv4)”.
6

(3) Select “Use following IP address”, and then enter an available IP address which is at the same
network segment with “192.168.11.1”.
If you want to modify the IP address of DAG2000-16S, please click “Network Local Network” in
the navigation tree on the left, and then input new IP address and DNS server address on the
displayed interface.
Modify IP Address of DAG2000-16S
Open a web browser and enter the IP address of DAG2000-16S (the default IP is 192.168.11.1).
Then the login GUI will be displayed. Both the default username and password are admin.
Log into DAG2000-16S
7
8

十年专注 铸就品质
Configure SIP Server Information
Log into DAG2000-16S, and then click SIP Server in the navigation tree and then enter the address
of the SIP server which is to be registered. Click Save in the last.
Click Port in the navigation tree on the left, and then click Add. Input the SIP account and
authentication password assigned by the SIP server.
Click Save and then restart the DAG2000-16S gateway for the new configurations to take effect.
9

Honest , Concentrated, Innovative , Open
Website: http://www.dinstar.com
https://www.facebook.com/dinstarvoip/
Basic Operations
•Dial *158# to query the IP address of LAN port of DAG2000-16S;
•Dial *114# to query the telephone number of a FXS port;
•Dial *165*000000# to restore default IP address, username and password;
•Restore factory default settings:（1）dial *166*000000#; （2）Press the RST button for 7 seconds;
（3）Log into the gateway and then click “Tools Factory Reset”. Then click Apply, and restart
the gateway.
•Dial *111# to restart DAG2000-16S.
This document only provides instructions for quick installation and basic configuration. For
detailed explanation of functions and parameters, please make reference to DAG2000-16S VoIP
Gateway User Manual, or ask for online technical support.
Detailed Configuration & Parameter Explanation
10
11