Displays2go FDWMDWBBRN User manual

ASSEMBLY INSTRUCTIONS
HARDWARE
Wall-Mounted Folding Desk
1. Mark the required height of the wall-mounted desk. Place
the Z-bar (C) on the wall and mark the center of each hole. Drill
2 pilot holes (6mm) at marked location with power drill.
3. Place the Z-bar (C) against the wall as shown and fix
it with the 2 enclosed Screws (B).
4. Carefully lift up the foldable desk above the mounted
Z-bar. Push the unit against the wall and slowly lower the unit
onto the Z-bar. Check the desk and make sure it’s mounted
securely
1 of 2
A4 pcs
Plastic Wall
Anchor
B4 pcs
Screw
320mm[12.6]
27.874"
2. Insert 1 Plastic Wall Anchor (A) into each pilot hole on
the wall. Use a rubber mallet to tap them flush with the wall. Wall
Desk
Wall
A
B
C4 pcs
Z-bar
C
Wall
NOTE: Use a bubble level to
help to keep the Z-bar level.
28.465"
56.339"
Wall
Desk
Wall
Ver. 07.21
SKU: FDWMDWBBRN
From ground to higher Z-bar: 39.25"
From ground to lower Z-bar: 29"

Wall
Desk
29.213"
27.402"
59.764"
adjustable
glides
MAIN DIMENSIONS
2 of 2
If you have any questions regarding our
products, please visit us at
www.displays2go.com or contact D2G
customer service at 844-221-3388.
Scan QR code to visit
product page