Displays2go mrclsc72bk User manual

PARTS LIST - 1
CAP (X2)
SCREW-CAP(W)
(x8)
PLASTIC GLAZING
(X8)
DOWEL PIN
(X12)
DRAWER
SLIDERS
(2 PAIR)
COUNTER
SLIDERS
(2 PAIR)
AGCON2
(X4)
#6x12 PHILLIP
SCREW (X34)
#6x118 PHILLIPs SCREW
(x4)
GLASS GLAZING (X6)
TOOLS NEEDED
#6 x 5/8" PAN SCREW
(X25)
TROX SCREW x 3/4"(X8)
AGCON3
(X4)
SCLKP (X1)
DRAWER LOCK (X2)
BOLT
(X64)
#10 CAM LOCK
(x64)
BT8C
(x6)
SS27CD
(x3)
NE09034-36 (X2)
HWI8 - 71 (X1)
HWI16 - 71 (X1)
HWI17- 72(X1)
GLIDE
(X9)
TOP GUIDE
(X6)
SHELF SUPPORT
PIN (X16)
DOOR PULL (X2)
SCREW-CAP
(x38)
SHELF GLASS (x2)
DOOR PROTECTION (x2)
GLASS DOOR (x2)
door
shelf
side
SIDE GLASS (X2)

CENTER PANEL & FRONT PANEL ASSEMBLE
CENTER PANEL (x2)
FRONT PANEL (x1)
#10 CAM LOCK (x18)
1. Attach slider to center panels;tighten.
2. Connect the front and bottom panels;tighten.
3.Attach center panels to bottom base; tighten.
BOLT (x2)
COUTER SLIDER (x2)
#6x12 PHILLIPS SCREWS (x4)
2.
a b c de
1. Connect toe kick panel to bottom panel using bolts.
2. Insert and tighten #10 cam locks.
3.Attach slider to the left panel with
#6x12 phillips screws.
4. Connect base with right side panel using bolts.
5. Insert and tighten #10 cam locks.
6. Inser the bolts on bottom panel.
BASE AND SIDE ASSEMBLE
BOTTOM PANEL (x1)
TOE KICK PANEL (x3)
RIGHT SIDE PANEL (x1)
#10 CAM LOCK (x22)
BOLT (x28)
COUNTER SLIDER (x1)
#6x12 PHILLIPS SCREWS (x2)
1.
ae
b c d

LEDGE TOP ASSEMBLE
LEDGE TOP PANEL (x1)
LEDGE TOP FRONT PANEL (x1)
DIVIDED PANEL (x1)
#10 CAM LOCK (x16)
BOLT (x4)
1. Connect ledge top front panel and ledge top panel ; tighten.
2. Insert #10 cam lock in divided panel.
3.Connect divided panel to ledge top panel ;tighten.
4.
a b cde
TOP PANEL ASSEMBLE
TOP PANEL (x1)
#10 CAM LOCK (x4)
BOLT (x10)
3.
1. Attach top panel using bolts.
2. Tighten #10 cam locks.
3. Connect Ledge top with top panel;tighten.
abc d

1.Insert dowel pins into place.
2. Connect drawer left,drawer right, and drawer back pieces.
3. Slide in drawer bottom.
4. Attach drawer front to drawer using bolts; tighten #10 cam locks.
5. Screw the drawer side &back using #6x118 philips screws.
6. Install the drawer lock using #6x12 phillips screws.
7. Attach drawer sliders to drawer using #6x12 phillips screws.
8. Install #10 screw caps.
6. DRAWER ASSEMBLE
DRAWER FRONT (x2)
DRAWER RIGHT (x2)
DRAWER LEFT (x2)
DRAWER BOTTOM (x2)
DRAWER BACK (x2)
DRAWER SLIDERS (2 PAIR)
#10 CAM LOCKS (x4)
BOLT (X4)
DOWEL PINS (x12)
#10 SCREW CAPS (x4)
DRAWER LOCK&KEY (X2)
#6x12 PHILLIPS SCREWS (x24)
#6x118 PHILLIPS SCREWS (x4)
a b cde
fghij
5.
1. Attach slider to the left panel with
#6x12 phillips screws.
2. Attach left side panel using bolts.
3. Tighten #10 cam locks.
4.Secure all the #10 cam locks&install cover caps.
5.Attach glides on the toe kick,.
LEFT SIDE PANEL ASSEMBLE
LEFT SIDE PANEL (x1) GLIDE (x9)
BOLT ( x16) SCREW CAP (x34)
COUNTER SLIDER (x1) WHITE SCREW CAP (x8)
#6x12 PHILLIPS SCREWS (x2)
abcde
fg

STANDARD&DOOR FRAME ASSEMBLE
#6 x 58 PAN SCREW (x11)
HWI17-71 (x1)
SS27CD (x3)
1. Tighten SS27CD on AK0314 using 1 #6 x 34 phillips screw.
2. Tighten the same SS27CD part on base with 2 #6 x 12 pan screws.
3. Repeat steps 1 & 2 to assemble the other 2 pcs of SS27CD.
1. Attach HWI17-71 on top;tighten by using 2 #6X58 pan screw.
2. Tighten SS27CD on front panel with 1 #6X58 pan screw.
2. Tighten the same SS27CD part on base with 2 #6X58 pan screw.
3. Repeat steps 1 & 2 to assemble the other 2 pcs of SS27CD.
abcd
e
7.
8.
1. Insert shelf support pins in place.
2. Slide drawer and shelf into place.
3.Insert cap into hole.
INSTALL DRAWER & SHELVES
SHELF SUPPORT PINS (x16)
SHELF PANEL(x2)
CENTER SHELF PANEL (x2)
CAP (x1)
abcd

DOOR FRAME ASSEMBLE
#6 x 58 PAN SCREW (x2)
HWI16-71 (x1)
HWI8-71 (x1)
1. Tighten SS27CD on AK0314 using 1 #6 x 34 phillips screw.
2. Tighten the same SS27CD part on base with 2 #6 x 12 pan screws.
3. Repeat steps 1 & 2 to assemble the other 2 pcs of SS27CD.
1. Attach HWI16-71 to bottom panel using #6x58 pan screws.
5. Snap HWI8-71 into HWI16-71.
abcd
e
9.
10.
1. Connect right sIde glass with bottom and front panel using
AGCON 2 &AGCON 3 using 8 TROX SCREW 3/4”& #6X58"PAN SCREW.
2. Repeat step 1 to connect left.
3. Put plastic glazing on TROX SCREW3/4”.
SIDE GLASS ASSEMBLE
SIDE GLASS (x2)
AGCON 2(x4)
AGCON 3(x4)
#6X58 PAN SCREW (x12)
PLASTIC GLAZING (x8)
TROX SCREW 3/4” (x8)
abcd
efg

GLASS DOOR ASSEMBLE
GLASS DOOR (x2)
GLAZING CHANNEL (x6)
NE09034-4 (x2)
TOP GUIDE (x4)
#6X12 PHILIPS SCREW(x2)
DOOR PULL (x2)
LOCK (x1)
DOOR PROTECTION (x2)
1. Put 3 pcs of glazing channel on glass door.
2. Install NE09034-4& door protection with glass door.
3. Install lock with NEO9034-36 by#6x12philips screw.
4. Put 2 pcs of top guide on the top of glass door.
5. Insert glass door into case.
6. Attach the DOOR PULL on glass door.
7. Repeat 1~6 to install other glass door.
abcd
efg h
11.
12.
1. Attach BT08C to SS27CD with proper height.
2. Place glass shelf sit on brackets.
BRACKET AND GLASS SHELF
ASSEMBLE
BT12C (x6)
GLASS SHELF (x2)
abc