dji Mavic 2 Enterprise User manual

v1.0
Quick Start Guide
快速入门指南
快速入門指南
クイックスタートガイド
퀵 스타트 가이드
Kurzanleitung
Guía de inicio rápido
Guide de démarrage rapide
Guida di avvio rapido
Snelstartgids
Guia de início rápido
Guia de Início Rápido
Краткое руководство пользователя
MAVIC 2 ENTERPRISE
Advanced

1
Contents
EN
CHS
CHT
JP
KR
DE
ES
FR
IT
NL
PT-PT
PT-BR
RU
Quick Start Guide 2
快速入门指南11
快速入門指南 20
クイックスタートガイド29
퀵 스타트 가이드 38
Kurzanleitung 47
Guía de inicio rápido 56
Guide de démarrage rapide 65
Guida di avvio rapido 74
Snelstartgids 83
Guia de Início Rápido 101
Guia de início rápido 92
Краткое руководство пользователя 110

EN
2
Aircraft
The DJITM MAVICTM 2 Enterprise Advanced features omnidirectional Vision Systems
and Infrared Sensing Systems*, and comes with a fully stabilized 3-axis gimbal camera
with a thermal camera and a visual camera, providing both infrared and visual images
simultaneously. DJI’s Obstacle Sensing technology helps users to fly and capture
complex shots while AirSense provides awareness of the surrounding airspace and
password protection ensures access to the aircraft and all data is secure. The Mavic
2 Enterprise Advanced supports up to 32× digital zoom and has a smoother thermal
imaging sensor with a signicantly higher resolution as well as a higher pixel visual
sensor. The aircraft boasts a maximum flight speed of 44.7 mph (72 kph) and a
maximum ight time** of 31 minutes.
13
14
19
18
16
17
15
20
22
21
1
A
B
2
3
4
56
7
8
9
10
12
11
1. Gimbal and Camera
A. Thermal Camera
B. Visual Camera
2. Forward Vision System
3. Downward Vision System
4. Lateral Vision System
5. Downward Infrared Sensing
System
6. Auxiliary Bottom Light
7. MicroSD Card Slot
8. Front LEDs
* The Vision Systems and Infrared Sensing Systems are affected by surrounding conditions. Read the
Disclaimer and Safety Guidelines and User Manual to learn more. http://www.dji.com/mavic-2-enterpise-
advanced
** Maximum ight time was tested in an environment with no wind while ying at a consistent 15.5 mph (25 kph).
This value is for reference only.
9. Motors
10. Propellers
11. Antennas
12. Aircraft Status Indicator
13. Upward Infrared Sensing
System
14. Backward Vision System
15. Intelligent Flight Battery
16. Battery Level LEDs
17. Power Button
18. Battery Buckles
19. USB-C Port
20. Link Button/Linking
Status Indicator
21. Extended Port (to
connect accessories)
22. Extended Port Cover

EN
3
DJI Smart Controller
The DJI Smart Controller is a remote controller built with DJI’s long-range transmission
technology OCUSYNCTM 2.0, offering a maximum transmission range of 6.2 mi (10 km)
and provides a live HD view from the aircraft’s camera. The Smart Controller comes
with a number of aircraft and gimbal controls as well as customizable buttons and has
a built-in 5.5-inch high-brightness screen with multiple functions such as Bluetooth and
GNSS. Connection to the Internet via Wi-Fi is also supported. The Smart Controller has a
maximum working time of 2.5 hours*.
* The Smart Controller is able to reach its maximum transmission distance (FCC) in a wide-open area
with no electromagnetic Interference at an altitude of about 400 ft (120 m).
The maximum runtime is tested in a laboratory environment. This value is for reference only.
1. Antennas
2. Back Button / Function Button
3. Sticks
4. RTH Button
5. Flight Pause Button
6. Flight Mode Switch
7. Status LED
8. Battery Level LEDs
9. 5D Button
10. Power Button
11. Conrm Button / Customizable Button C3
12. Touch Screen
13. USB-C Port
14. Microphone
15. Gimbal Dial
16. Record Button
17. HDMI Port
18. MicroSD Card Slot
19. USB-A Port
20. Focus / Shutter Button
21. Aperture/Shutter Adjustment Dial
1
69999
1010101010101010101010101010
10
12
10
13
77 8
11
3
24
14
22
26
27
25
15
16
17 18 19
20
21
23
24
5
1
69999
1010101010101010101010101010
10
12
10
13
77 8
11
3
24
14
22
26
27
25
15
16
17 18 19
20
21
23
24
5
1
69999
1010101010101010101010101010
10
12
10
13
77 8
11
3
24
14
22
26
27
25
15
16
17 18 19
20
21
23
24
5
22. Air Vent
23. Sticks Storage Slot
24. Customizable Button C2
25. Speaker
26. Customizable Button C1
27. Air Intake

EN
4
1. Preparing the Aircraft
Remove the gimbal
cover from the camera.
Unfold the front arms. Unfold the rear arms.
Unfolded
Unfold the front arms and the propellers before the rear ones. All arms and propellers
must be unfolded before takeoff.
1
2
3
1
2
3
Press the propellers
down and rotate until
they click in place.
Match the propellers
to motors.
Marked Unmarked
2. Charging the Batteries
Use the provided charger to fully
charge the Intelligent Flight Battery
before rst use.
Remove the Intelligent Flight Battery
Charging Time:
~1 hour 30 minutes
Charging Time:
~2 hours
Please use the ofcial 24W USB charger to charge the Smart Controller. When a
standard 24W USB charger is not available, it is recommended to use an FCC/
CE certied USB charger rated 12V/2A.
24W USB Charger
Battery Charger
USB-C Cable
Power Outlet
100 - 240V

EN
5
Install the battery to the aircraft and power it on. Once the battery temperature is lower
than 6° C, it will auto heat to maintain a temperature between 8-10° C. Refer to the
User Manual for more details.
Low
High
Checking the Battery Levels and Powering On/O
Press once to check the battery level.
Press, then press and hold to turn on/off.
Press once to check the battery level on the
LCD screen.
Press once, then press and hold to turn on/
off the remote controller.
Low High
Lift the antennas Rotate to attach
the sticks
Remove the sticks
The optimal transmission range is shown above. Ensure the antennas are facing towards
the aircraft. When the angle between the antennas and the back of the Smart Controller
is 80° or 180°, the connection between the Smart Controller and the aircraft can reach
its optimal performance.
80°
3. Preparing the Remote Controller
Ensure the control sticks are rmly mounted.
In real operation, the DJI Pilot app will prompt to warn that the transmission signal
is weak, and please adjust the antennas to ensure that the aircraft is back to the
optimal transmission range.

EN
6
DJI Pilot
App
5. Flight
Ready to Go (GPS)
OR
Left stick up (slowly)
to take off
Left stick down (slowly) until you touch the
ground
Hold a few seconds to stop the motors
Before taking off, make sure the Aircraft Status Bar
in DJI Pilot displays “Ready to Go”.
Combination stick command to
start/stop the motors
Manual Takeo / Landing
Only stop motors mid-ight in emergency situations when doing so can reduce
the risk of damage or injury. The method to stop the motor can be set in DJI Pilot.
4. Preparing for Takeoff
Power on the remote controller Power on the aircraft Launch DJI Pilot
Use a DJI account to activate the aircraft and the Smart Controller. Activation
requires an internet connection. Before activating the aircraft in DJI Pilot, power on
the Smart Controller and follow the prompts to activate.
Internet
Set a password for the aircraft in the DJI Pilot app to ensure secure access and
protect your onboard data.

EN
7
Remote Controller Operation
* Modular Accessories
Left Stick
Up
Down
Turn Left Turn Right
Right Stick Forward
Backward
Left Right
The default flight control is known as Mode 2. The left stick controls the aircraft's
altitude and heading, while the right stick controls its forward, backward, left and right
movements. The gimbal dial controls the camera's tilt.
Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to
the Home Point, you should guide it with the control sticks.
Press the Flight Pause button for emergency braking during ight.
M2E Beacon M2E Spotlight
M2E Speaker M2EA RTK Module
(not included)

EN
8
120m
≥10 m/s
Fly in Open
Areas
Strong GPS
Signal
Maintain Line of
Sight
Fly Below 400 Feet
(120 m)
Avoid flying over or near obstacles, crowds, high voltage power lines, trees or
bodies of water.
DO NOT fly near strong electromagnetic sources such as power lines and base
stations as it may affect the onboard compass.
DO NOT use the aircraft in adverse weather conditions such as rain, snow, fog
and wind speeds exceeding 10 m/s or 22 mph.
No Fly Zone
Stay away from the rotating propellers
and motors.
Learn more at:
http://www.dji.com/flysafe
6. Fly Safe
It’s important to understand basic ight guidelines, for the safety of both you and
those around you. Don't forget to read the Disclaimer and Safety Guidelines.

EN
9
Specications
Aircraft
Takeo Weight 909 g
Max Speed 72 km/h (S-mode) (near sea level, no wind)
Max Service Ceiling Above Sea Level 6000 m
Operating Temperature Range 14° to 104° F (-10° to 40° C)
GNSS GPS+GLONASS
Operating Frequency 2.4-2.4835 GHz; 5.725-5.850 GHz
Transmission Power (EIRP) 2.4 GHz
FCC: ≤26 dBm; CE/MIC: ≤20 dBm; SRRC: ≤20 dBm
5.8 GHz
FCC: ≤26 dBm; CE: ≤14 dBm; SRRC: ≤26 dBm
Internal Storage 24 GB
Gimbal
Controllable Range Tilt: -90 to 30°
Thermal Camera
Sensor Uncooled VOx Microbolometer
Lens Focal Length Approx. 9 mm
Equivalent: Approx. 38 mm
Sensor Resolution 640×512 @30Hz
Digital Zoom 16×
Pixel Pitch 12 μm
Spectral Band 8-14 μm
Photo R-JPEG
Video MP4
Temperature Measurement Method Spot Meter, Area Measurement
FFC Auto/Manual
Visual Camera
Sensor 1/2” CMOS, Eective pixels: 48 M
Lens FOV: approx. 84°
Equivalent: 24 mm
Aperture: f/2.8
Focus: 1 m to ∞
ISO Range Video: 100-12800 (auto)
Photo: 100-1600 (auto)
Max Image Size 8000×6000
Still Photography Modes Single shot
Interval (2/3/5/7/10/15/20/30/60 s)
Pano: spherical panorama
Video Recording Modes 3840×2160@30fps
1920×1080@30fps
Photo JPEG
Video MP4

EN
10
Smart Controller
Operating Frequency 2.400-2.483 GHz; 5.725-5.850 GHz
Max Transmission Distance
(unobstructed, free of interference) FCC: 10 km; CE: 6 km; SRRC: 6 km; MIC: 6 km
Transmitter Power (EIRP) 2.4 GHz
FCC: ≤25.5 dBm; CE/MIC: ≤18.5 dBm; SRRC: ≤19 dBm
5.8 GHz
FCC: ≤25.5 dBm; CE: ≤12.5 dBm; SRRC: ≤18.5 dBm
Storage Capacity ROM 16 GB + Scalable (microSD card)
Battery 5000 mAh @ 7.2 V
Operating Temperature Range -4° to 104° F (-20° to 40° C)
Charging Time 2 hr (with a USB charger at 12V/2A)
Battery Life 2.5 hr
24W USB Charger Input: 100-240 V, 50-60 Hz, Max. 0.8 A
Output: 3.6-8 V 3.0 A/12 V 2.0 A
Intelligent Flight Battery
Capacity 3850 mAh
Voltage 17.6 V (max)
15.4 V (typical)
Battery Type LiPo
Energy 59.29 Wh
Net Weight Approx. 297 g
Charging Temperature Range 41° to 104° F (5° to 40° C)
Heating Method Manual/Auto
Heating Temperature Range -4° to 43° F (-20° to 6° C)
Heating Time 500 s (max)
Heating Power 55 W (max)
Intelligent Flight Battery Charger
Input 100-240 V, 50-60 Hz, 1.8 A
Output Main: 17.6 V 3.41 A or 17.0 V 3.53 A
USB: 5 V 2 A
Rated Power 60 W
For more information, read the User Manual:
www.dji.com/mavic-2-enterprice-advanced
※This content is subject to change without prior notice.
MAVIC is a trademark of DJI.
Copyright © 2021 DJI All Rights Reserved. Printed in China.

CHS
11
认识 Mavic 2 行业进阶版
MAVICTM 2 行业进阶版飞行器配备先进的全方位视觉系统及红外传感系统 *，可在室内外
稳定悬停、飞行，具备自动返航以及障碍物感知功能。飞行器内置 DJI AirSense 可检测
周围航空器情况，支持密码保护以保障设备及数据安全，并且可搭载指定配件以适应不同
应用场景。进阶版飞行器拥有更高清、流畅的热成像传感器和更高像素的可见光传感器，
最高支持 32 倍数码变焦。最大飞行速度为 72 km/h，最长飞行时间 ** 约为 31 分钟。
13
14
19
18
16
17
15
20
22
21
1
A
B
2
3
4
56
7
8
9
10
12
11
1. 一体式云台相机
A. 红外相机
B. 可见光相机
2. 前视视觉系统
3. 下视视觉系统
4. 侧视视觉系统
5. 底部红外传感系统
6. 下视补光灯
7. 相机 Micro SD 卡槽
8. 飞行器机头指示灯
* 视觉系统及红外传感系统有使用环境与条件要求，请阅读《免责声明与安全概要》及《用户手册》了解
安全注意事项和如何正确使用相关功能。
http://www.dji.com/mavic-2-enterpise-advanced
** 最长飞行时间为无风环境时以 25 km/h 匀速飞行时测得。
9. 电机
10. 螺旋桨
11. 天线
12. 飞行器状态指示灯
13. 顶部红外传感系统
14. 后视视觉系统
15. 智能飞行电池
16. 电池电量指示灯
17. 电池开关
18. 电池卡扣
19. 调参 /数据接口
（USB-C）
20. 对频按键 /对频指示灯
21. 扩展接口（可连接配件）
22. 扩展接口保护盖

CHS
12
DJI 带屏遥控器
DJI 带屏遥控器采用 OCUSYNCTM 2.0 高清图传技术，配合完备的功能按键可在最大 10 千
米*通信距离内完成飞行器与相机的操作与设置。遥控器内置 5.5 英寸高亮触摸屏，具备
蓝牙及卫星定位等功能，并支持通过 Wi-Fi 连接至互联网。可拆卸摇杆设计更便于遥控器
收纳。最长工作时间 *约为 2.5 小时。
* 在开阔无遮挡、无电磁干扰的环境飞行，并且飞行高度为 120 米左右，在 FCC 标准下遥控器可以达到
最大通信距离。最长可工作时间为实验环境下测得，仅供参考。
1. 天线
2. 退回按键 /系统功能按键
3. 摇杆
4. 智能返航按键
5. 急停按键
6. 飞行模式切换开关
7. 状态指示灯
8. 电量指示灯
9. 五维按键
10. 电源按键
11. 确认按键 /自定义功能按键 C3
12. 触摸显示屏
13. USB-C 接口
14. 麦克风
22. 出风口
23. 摇杆收纳槽
24. 自定义功能按键 C2
25. 扬声器
26. 自定义功能按键 C1
27. 入风口
1
69999
1010101010101010101010101010
10
12
10
13
77 8
11
3
24
14
22
26
27
25
15
16
17 18 19
20
21
23
24
5
1
69999
1010101010101010101010101010
10
12
10
13
77 8
11
3
24
14
22
26
27
25
15
16
17 18 19
20
21
23
24
5
15. 云台俯仰控制拨轮
16. 录影按键
17. HDMI 接口
18. MicroSD 卡槽
19. USB-A 接口
20. 对焦 /拍照按键
21. 光圈 /快门调节拨轮
1
69999
1010101010101010101010101010
10
12
10
13
77 8
11
3
24
14
22
26
27
25
15
16
17 18 19
20
21
23
24
5

CHS
13
22. 出风口
23. 摇杆收纳槽
24. 自定义功能按键 C2
25. 扬声器
26. 自定义功能按键 C1
27. 入风口
1. 准备飞行器
移除云台保护罩 展开前机臂 展开后机臂
展开状态
请确保按顺序展开机臂，在机臂与桨叶全部展开之后再开启飞行器。
1
2
3
1
2
3
嵌入桨座按压到底，沿锁
紧方向旋转直至弹起锁定
匹配标记安装螺旋桨
白色标记 无标记
2. 充电
首次使用需给智能飞行电池充满电以
激活电池。
取出智能飞行电池
请使用官方 24W USB 充电器对带屏遥控器进行充电。如不使用官方充电器，推荐使用符合
FCC/CE 标准，规格为 12V/2A 的USB 充电器。
完全充满约需
1 小时 30 分钟
完全充满约需
2 小时
交流电源
100~240 V
24W USB 充电器
充电器
USB-C 连接线

CHS
14
低
高
检查电量与开启 / 关闭
短按一次检查电量。
短按一次，再长按 2 秒可开启、
关闭飞行器。
短按一次电源按键查看电量。
短按一次电源按键，再长按 2 秒以开启、
关闭遥控器。
安装电池至飞行器后并开启电源后，一旦电池温度低于 6℃，电池将开启自动加热功能，保持
电池温度在 8-10℃之间。详细内容请参考用户手册。
低 高
3. 准备遥控器
向上抬起天线 安装摇杆取出摇杆
获取最佳通信范围，遥控器与飞行器的相对位置如图所示，当天线与遥控器背面呈
80°或 180°夹角时，且天线平面正对飞行器，可让遥控器与飞行器的信号质量达到
最佳状态。
注意将摇杆拧紧，确保安装到位。
实际操作中，DJI Pilot App 在图传信号不佳时将会进行提示，请根据提示调整天线位置，确
保飞行器处于最佳通信范围。
80°

CHS
15
DJI Pilot
App
5. 飞行
起飞准备完毕（GPS）
或
起飞：
缓慢向上推动油门杆（默
认左摇杆）飞行器起飞。
降落：
向下拉动油门杆至飞行器落地，
在最低位置保持 2秒，电机停止。
起飞前请务必等待 DJI Pilot App 相机界面显示
“起飞准备完毕”。
掰杆动作：
电机启动／停止
手动起飞／降落
飞行过程中若遇到紧急情况，可执行掰杆动作停止电机以减少伤害，电机紧急停机方式可在
DJI Pilot App 中进行设置。
可在 DJI Pilot App 中对飞行器设置安全密码以保证飞行器的使用安全。
4. 准备飞行
开启遥控器 开启飞行器 运行 DJI Pilot App
Internet
全新的设备需激活才能使用。请先开启遥控器并根据提示完成激活，再使用 DJI Pilot App 激
活飞行器。激活时请确保设备可以接入互联网。

CHS
16
遥控器操作
*可扩展配件
左摇杆 右摇杆
上升
下降
右转左转
前
后
右左
遥控器出厂默认操控方式为“美国手”。左摇杆控制飞行高度与方向，右摇杆控制飞
行器的前进、后退以及左右飞行方向。云台俯仰控制拨轮可控制相机的俯仰拍摄角度。
请预先在 DJI Pilot App 设置合适的自动返航高度。
飞行过程中遇到需要紧急刹车的情况，请按急停按键使飞行器悬停。
M2E 夜航灯 M2E 探照灯
M2E 喊话器 M2EA RTK 模块
(需自行购买 )

CHS
17
切勿接触旋转中的螺旋桨，
否则可能受到严重人身财产损害。
禁飞区
详情请访问以下网址:
http://www.dji.com/flysafe
在开阔无遮挡
的环境中飞行
GPS信号良好 在目视范围内飞行
飞行时请远离人群、树木、电线、高大建筑物、机场和信号发射塔等。无线电发
射塔、高压线、变电站以及具有磁性的大块金属可能会对遥控信号及指南针产生
干扰，威胁飞行安全。
下雨、大雾、下雪、雷电、大风（风速每秒10米及以上）等天气请勿飞行。
控制飞行高
度低于120米
120米
≥10米/秒
6. 飞行安全
禁飞区、飞行安全认识对于您、周围人群与环境的安全非常重要。
请务必仔细阅读《免责声明和安全概要》。

CHS
18
规格参数
飞行器
起飞重量 909 g
最大水平飞行速度 72 km/h（运动模式，海平面附近无风环境）
最大飞行海拔高度 6000 m
工作环境温度 -10℃至 40℃
GNSS GPS+GLONASS
工作频率 2.4-2.4835 GHz; 5.725-5.850 GHz
发射功率（EIRP）2.4 GHz
FCC: ≤26 dBm; CE/MIC: ≤20 dBm; SRRC: ≤20 dBm
5.8 GHz
FCC: ≤26 dBm; CE: ≤14 dBm; SRRC: ≤26 dBm
机载内存 24 GB
云 台
可控转动范围 俯仰：-90°至 +30°
红外相机
传感器 非制冷氧化钒微测辐射热计
镜头焦距 约 9 mm
等效焦距：约 38 mm
传感器分辨率 640×512 @30Hz
数字变焦 16×
像元间距 12 μm
波长范围 8-14 μm
照片格式 R-JPEG
视频格式 MP4
测温方式 点测温，区域测温
FFC 自动 /手动
可见光相机
影像传感器 1/2 英寸 CMOS；有效像素 4800 万
镜头 视角：约 84°
等效焦距：24 mm
光圈：f/2.8
对焦点：1 m 至无穷远
ISO 范围 视频：100-12800（自动）
照片：100-1600（自动）
最大照片尺寸 8000×6000
照片拍摄模式 单张拍摄
定时拍摄：2/3/5/7/10/15/20/30/60 s
全景：球形拍摄
录像分辨率 3840×2160@30fps
1920×1080@30fps
图片格式 JPEG
视频格式 MP4
遥控器
工作频率 2.400-2.483 GHz; 5.725-5.850 GHz
最大信号有效距离（无干扰、
无遮挡）
FCC: 10 km; CE: 6 km; SRRC: 6 km; MIC: 6 km
等效全向辐射功率（EIRP）2.4 GHz
FCC: ≤25.5 dBm; CE/MIC: ≤18.5 dBm; SRRC: ≤19 dBm
5.8 GHz
FCC: ≤25.5 dBm; CE: ≤12.5 dBm; SRRC: ≤18.5 dBm

CHS
19
存储空间 ROM 16GB + microSD 卡可扩展存储空间
电池 5000 mAh @ 7.2 V
工作环境温度 -20℃至 40℃
充电时间 2 小时（使用规格为 12V/2A 的USB 充电器）
续航时间 2.5 小时
24W USB 充电器 输入：100-240 V，50-60 Hz，最大 0.8 A
输出：3.6-8 V 3.0 A/12 V 2.0 A
智能飞行电池
容量 3850 mAh
电压 17.6 V（满充电压）
15.4 V（典型电压）
电池类型 LiPo
能量 59.29 Wh
电池整体重量 约 297 g
充电环境温度 5℃至 40℃
加热方式 手动加热，自动加热
加热温度 -20℃至 6℃
加热时间 500 s（最大）
加热功率 55 W（最大）
智能飞行电池充电器
输入 100-240 V，50-60 Hz，1.8 A
输出 主路：17.6 V 3.41 A 或17.0 V 3.53 A
USB：5 V 2 A
额定功率 60 W
Printed in China.
了解产品详细信息，请访问以下网址下载 《用户手册》
www.dji.com/mavic-2-enterprice-advanced
※内容如有更新，恕不另行通知。
MAVIC 是大疆创新的商标。
Copyright © 2021 大疆创新 版权所有