Dnake E416 User manual

User Manual
———
DNAKE E416

REMARK
Please follow the user manual for correct installation and testing. If there is any
doubt please call our tech-supporting and customer center.
Our company applies ourselves to reformation and innovation of our products. No
extra notice for any change. The illustration shown here is only for reference. If
there is any difference, please take the actual product as the standard.
The product and batteries must be handled separately from household waste.
When the product reaches the end of service life and needs to be discarded,
please contact the local administrative department and put it in the designated
collection points in order to avoid the damage to the environment and human
health caused by any disposal. We encourage recycling and reusing the material
resources.

CATALOG
PRODUCT FEATURE ............................................. 1
TECHNICAL PARAMETER ..................................... 1
PACKAGE CONTENT ............................................. 2
OVERVIEW.............................................................. 3
BASIC OPERATION ................................................ 4
DEVICE SETTING ................................................. 11
WEB SETTING ...................................................... 17
SYSTEM DIAGRAM .............................................. 24
DEVICE WIRING ................................................... 25
INSTALLATION...................................................... 27
TROUBLESHOOTING........................................... 29
SAFETY INSTRUCTION ....................................... 30

1
PRODUCT FEATURE
1. Android 10 System
2. Powered by PoE or power adapter (DC12V/2A)
3. Support SIP 2.0 protocol, easy integration with other SIP devices
4. Compatible with 3rd party application
5. Support monitoring 16 IP cameras
TECHNICAL PARAMETER
System: Android 10
RAM: 1 GB
ROM: 8 GB
Front Panel: Plastic
Power Supply: PoE (802.3af) or DC 12V/2A
Standby Power: 3 W
Rated Power: 10 W
Wi-Fi: IEEE802.11 b/g/n,@2.4GHz (Optional)
TF Card Slot: 1
Ethernet Port: 1 x RJ45, 10/100 Mbps adaptive
Resolution: 1024 x 600
Working Temperature: -10℃to +55℃
Storage Temperature: -40℃to +70℃
Working Humidity: 10% to 90% (non-condensing)

2
PACKAGE CONTENT
MODEL: E416
E416 Wiring Cover PM4×20 (2 pcs) Diode (3 pcs) Quick Start Guide
Desktop Stand
(Optional)

3
OVERVIEW

4
BASIC OPERATION
1. Call
Go to Call > Dial and enter Building number + Building + Riser number + Riser +
Room number + dial icon to call Indoor Monitor (such as 1 + Building + 1 + Riser
+ 1111 + Dial button).
2. Monitor
Click Monitor icon on Indoor Monitor’s homepage to monitor Door Station. You
can unlock by clicking door icon or switch to monitor other devices by clicking left
and right arrows or the name above.
3. Message
Indoor monitor can only receive the message sent by the CMS or Master Station.
Up to 64 records can be received in SMS.

5
4. DND
Click DND icon to enable do not disturb function. No calls can call in.
5. Quad Splitter
On the 2nd homepage, click Quad Splitter. Click any screen of IPC to make it full
screen. Click left or right arrow to check other pages. Up to 16 IPC can be added.
6. Phonebook
Slide from left to right near the left edge of the screen to wake up phonebook
page.

6
Or go to Call > Phonebook. Select the name on the phonebook and press dial
button to call.
7. QR Code
Click QR Code and scan by Smart Life app to add this Indoor Monitor to your
phone. Only when the license is filled in Internet-connected Indoor Monitor, QR
code will be available.
8. Security
Security is for sensors. The default password is 1234.

7
8.1. ON/OFF
ON:
Click Out, Home, or Sleep icon to activate the
scene for alarm sensors, the icon on the main
interface will light up with a beep sound;
OFF:
Click OFF to disable scene;
Within Activation Time, click the OFF icon and
enter password to terminate the alarm sending to
Master Station (the default password is 1234);
8.2. Zone
Type:
Normal: Only when the security is on and sensor
is triggered, alarm will be sent to Indoor Monitor.
After activation time, Master Station will also
receive the alarm; (PIR, Door, Window)

8
Emergency: once Panic button is triggered, only
Master Station will receive alarms secretly; 24
hours standby even if the security is off; (Panic,
Pull Cord)
24H: 24 hours standby even if the security is off
(Smoke, Gas, Flood);
Mode:
3C: for the sensor with 2.2KΩ resistance;
Regardless of the connection to NC or NO, the
alarm can be triggered normally;
NO: normally open;
NC: normally closed;
BELL: in BELL mode, Master Station will not
receive any alarm. Indoor Monitor is regarded as
a doorbell receiver;
Delay:
The delayed time for alarm sending to Indoor
Monitor (0s, 5s, 15s, 20s, 25s, 40s, 60s);
Sensor:
Sensor types (Smoke, Gas, PIR, Door, Window,
Panic, Flood, Pull Cord);
8.3. Scene
Activation Time:
NONE, 30s, 40s, 60s, 100s, and 300s;
Mode:
Tick to link sensors to Out, Home, or Sleep
scene;
8.4. Settings

9
Old:
Current security password of the Device (Default
123456);
New:
New security password of the Device;
Confirm:
Confirm security password of the Device;
9. Concierge
Press the Concierge icon to call Master Station.
10. Elevator
Press the Elevator icon to call control elevator (DNAKE Elevator Control Module
is needed).
11. Add More Indoor Monitors

10
Keep Building, Riser, Apartment No., Sync the same as other Indoor Monitors,
and Device number should be different. The Device number can be from 0 to 9.
But you must have one Indoor Monitor’s Device number is 0 and keep it online
because 0 here stands for the main one.

11
DEVICE SETTING
Connect Indoor Monitor and other devices to a network switch in the same LAN.
Go to Settings to configure the device.
1. Display
Brightness level:
Screen brightness adjustment;
Sleep:
Screen sleep time (15s, 30s, 1min, 2mins,
5mins, 20mins, 30mins);
2. Sounds
Auto Answer:
Pick up automatically when receiving a call;
Ring Vol:
Volume of System can be set from 1 to 6;

12
Intercom Vol:
Volume of Intercom can be set from 1 to 6;
Button:
The keytone;
Ringtone:
The ringing sound;
3. Date & Time
Automatic date time:
Enable to synchronize computer time;
Time Zone:
A region that observes a uniform standard time;
12H/24H:
The format of time;
NTP:
Network Time Protocol (NTP) is a protocol used
to synchronize computer time;
4. Language
Language:
16 languages supported (简体中文, English, 繁體
中文, תי ִרב ִﬠ, Deutsch, Español, Türk, Tiếng Việt,
Nederlands, Português, Polski, Русский, ﻲﺑرﻋ,
Français, Italiano, slovenský);
5. Devices

13
You need to click search icon to add Door Stations to Indoor Monitor and click tick
to save before monitoring. Click funnel icon to pin the selected device to the top.
Click pen icon to edit devices.
6. Version
Firmware:
Firmware version of the device;
IP:
Current IP address of the device;
Wi-Fi IP:
Current Wi-Fi IP address of the device;
MAC:
MAC address of the device;
7. More > Ethernet
The device network can be set to either DHCP or a static IP address. CMS
parameters should be configured here when you try to register this device to
CMS.

14
DHCP:
Enable DHCP (Dynamic Host Configuration
Protocol) to dynamically distributing network
configuration parameters;
IP:
Configure Static IP address to manually
distributing network configuration parameters;
Mask:
Subnet mask;
Gateway:
A component that is part of two networks, which
use different protocols;
DNS:
Domain Name Server of the device;
Current IP:
Current IP address of the device;
8. More > Wi-Fi
Wi-Fi:
Enable to connect to Wi-Fi;
9. More > Room

15
Build:
Number of the building (Building range: 1-999);
Riser:
Number of the unit (Unit range: 1-99);
Apartment No.:
Number of the room;
Device:
Number of the device (Unit range: 1-9);
Sync:
A number used to synchronize to other Indoor
Monitors;
CMS IP:
Server address of CMS;
Password:
Password you set for this device’s CMS
registration;
10. More > SIP
SIP enable:
Enable to use SIP;
Proxy:
SIP Server Host of SIP; the default port is 5060;
Realm:
Realm of SIP; the default port is 5060;
Username:
Username of SIP;
Password:
Password of SIP;
11. More > Password
Old Password:
Current administrator password of the Device
(Default 123456);
New Password:
New administrator password of the Device;
Confirm Password:
Confirm administrator password of the Device;

16
12. More > Apps
Apps:
3rd party apps can be managed here;
13. More > Reset
Reset:
Reset to factory settings;