Dogtra iQ VIBE User manual

1
iQ VIBE
NO BARK COLLAR
Owner's Manual
Please read this manual thoroughly
before operating the iQ VIBE.

2
WARNING
Please read all safety and product information below
before using your Dogtra product. Failure to follow these
safety instructions could result in injury to you, your dog
and others, or it could result in damage to your Dogtra
product or other property.
PRODUCT SAFETY
Training Methods
Dogtra products may be used with a variety of training
methods. However, each dog may have a dierent
reaction to training methods and to Dogtra products.
Closely observe your dog when determining the right
training method to use with your Dogtra product.
Aggressive Dogs
Do not use Dogtra products with aggressive dogs as such
dogs may react adversely and cause injury to people or
other dogs. Seek the assistance of a dog-training specialist
or veterinarian when dealing with aggressive dogs.
Children
Dogtra products are not toys. Adult supervision and close
attention are necessary when Dogtra products are used by
or near children.
IMPORTANT SAFETY AND PRODUCT
INFORMATION

3
PRODUCT DAMAGE
Electrical Product
Your Dogtra product contains electrical components and
batteries. Do not use or keep your product near heat or
flammable sources. Such use or storage may damage your
product and/or cause fire, explosion, injury, or property
damage.
Medical Device Interference
Dogtra products contain electrical and magnetic
components that emit low level electromagnetic waves and
radio frequencies. These electromagnetic waves or radio
frequencies may interfere with pacemakers, defibrillators,
or other medical devices. Consult your physician or medical
device maker before using your medical device with a
Dogtra product. If you think that your Dogtra product is
interfering with your pacemaker, defibrillator, or other
medical device, stop using the Dogtra product.
Inadvertent Activation
The digital microprocessor oers thousands of unique
codes to eliminate frequency match-up with other Dogtra
e-collars.

4
UNAUTHORIZED USE
Your Dogtra product should be used only in a humane
manner to train and educate your dog. Dogtra products are
not intended for use in any other manner nor are they
intended for use with other animals or with humans.
BATTERY
Your Dogtra product contains batteries. Take care when
removing and installing batteries as your fingers may get
caught. Dispose of batteries as provided by your local
regulations. Do not disassemble, crush, heat, or otherwise
alter the battery as it may cause fire, injury or property
damage.

5
CONTENTS
AT A GLANCE .................................................................
MAIN FEATURES ............................................................
OVERVIEW .......................................................................
TURNING THE iQ VIBE ON/OFF ...............................
TESTING THE iQ VIBE ..................................................
OPERATING MODES ......................................................
LED INDICATOR ..............................................................
RECEIVER FITTING ........................................................
FINDING THE RIGHT LEVEL .......................................
CHARGING THE BATTERY ..........................................
MAINTENANCE ...............................................................
TROUBLESHOOTING GUIDE ......................................
WARRANTY AND REPAIR INFORMATION .............
6
6
7
8
9
10
11
12
13
14
16
17
18

6
MAIN FEATURES
• Ultra-compact receiver
• 3-level High Performance Pager (HPP) vibration
• Fully waterproof
• 2-hour rapid charge batteries
• Sound Recognition Sensor
• For dogs as small as 10 pounds
AT A GLANCE
iQ VIBE
No Bark Collar
Battery
Charger
Owner's
Manual

7
OVERVIEW
On/Off & Vibration
Intensity Button
Battery Charging
Receptacle &
Rubber Plug
Collar Strap
Vibration
Pad
LED Indicator
Light
Sound Recognition
Sensor

8
On: Press the on/off button on the receiver until the
LED illuminates green.
Off: Press the on/off button on the receiver for 2 seconds
until the LED illuminates red.
TURNING THE iQ VIBE ON/OFF

9
1. Make sure the iQ VIBE is turned off.
2. Hold the on/off button down for 4 seconds.
3. Release the on/off button when the green LED light
blinks rapidly.
4. Blow into the Mic Sensor. The receiver will emit a High
Performance Pager (HPP) vibration three times if
operating correctly.
TESTING THE iQ VIBE
Mic Sensor
LED

10
2. Safety Time:
The iQ VIBE has a preset delay of 4 seconds in between
the vibrations even if the dog continuously barks. The
reason for the delay is so that your dog figures out the
implications of the corrections from barking.
3. Sleep Mode:
If there is no barking for 12 seconds or more, the system
will go into sleep mode. There will not be any LED light
during sleep mode. If the dog barks again, the LED light
will turn back on.
1. High Performance Pager (HPP) Vibration
The iQ VIBE has three High Performance Pager (HPP)
vibration levels. With the iQ VIBE on, briefly press the on/
off button to increase the level. When the iQ VIBE is turned
off, the last level that the system was on will be saved. If
the incorrect level is selected, you can press the on/off
button to start over.
OPERATING MODES