Dormakaba SVA 4 Series Training manual

EN
SVA 4xxx
Commissioning instructions
060648-45532/16387 – 05/2023 1
Contents
1 Information about this document 1
1.1 Contents and purpose 1
1.2 Target group 1
1.3 Other applicable documents 1
1.4 Abbreviations 1
1.5 Symbols used 1
2 Safety 2
2.1 Intended use 2
2.2 Non-intended use 2
2.3 Reasonably foreseeable misuse 2
3 Product description 2
3.1 Parts included 2
3.2 Door fittings required 2
3.3 Technical data 3
3.4 Variants 3
3.5 Classification 3
4 Pin assignment 3
4.1 Block diagram 4
5 Mounting 4
6 Disassembly and disposal 4
1 Information about this document
1.1 Contents and purpose
This document supplements the SVA/SVI locks'
assembly instructions and contains technical
information for the mounting and commissioning of
an SVA4xxx lock.
1.2 Target group
The locks may only be mounted by technical
specialists who have been trained for this purpose by
dormakaba.
1.3 Other applicable documents
• SVA/SVI locks assembly instructions
• Manual for the connecting cable SVP-A1100/2100
• Technical documents for the selected control unit
• Commissioning instructions for the SVI lock
1.4 Abbreviations
SVA
Active, self-locking
(anti-)panic lock for the active
door leaf in 2-leaf door units
SVI
Inactive, self-locking (anti-)panic
lock for the passive door leaf in
2-leaf door units
4xxx
All versions of a lock; the exact
lock type is marked with 3 digits
instead of xxx.
G Active door leaf
S Passive door leaf
1.5 Symbols used
12Item numbers used in image
caption

SVA 4xxx Commissioning instructions
060648-45532 – 05/20232
2 Safety
2.1 Intended use
The SVA4xxx is a lock for the active door leaf on
2-leaf door units.
• Only use the components approved by dormakaba
for mounting:
- SVI4xxx or SVI5xxx lock on passive door leaf
- SVP-A1100 or SVP-A2100 connection cable
• Only mount combinations of lock and fitting that
have been tested and approved in accordance with
EN179 or EN1125. The list of approved components
can be found in the constancy of performance
certificate at www.dormakaba.com. Other
combinations on request.
• Mounting on fire and smoke protection doors
is only permitted if the usability certificates for
these doors provide for this mounting and if the
requirements are followed.
• The SVA4xxx lock is suitable for use on fire and
smoke protection doors.
2.2 Non-intended use
• The lock must not be opened by third parties. If
the lock is opened by a third party, there is a risk
that safety-relevant functions (e.g. escape/panic
functions) will no longer exist.
• The identification plate on the lock contains
important information required by law and must
not be damaged or obscured.
2.3 Reasonably foreseeable misuse
• Do not make any changes to the door unit that are
not described in this manual.
• If door seals (e.g. profile seals, floor seals) are used,
they must not impede the intended function
3 Product description
The SVA4xxx lock is a mechanical lock for the active
door leaf. The SVA lock locks automatically as soon as
the door leaf is closed. In case of emergency, the door
can be opened in the escape direction at any time. The
SVA lock canquery the status of the trip latch, bolt,
door handle/panic bar and the locking cylinder.
Installation example
Fig.1
12
7
3
5
6
8
S G
4
9
Mechanical, monitored installation situation (example)
(1) Active door leaf with SVA4xxx
(2) Passive door leaf with SVI4xxx
(3) Panic door fitting
(4) Cable transfer CT, cable spiral CS and if
necessary etachable cable transfer DT
(5) Connecting cable SVP-A1100/2100
(6) Monitoring (optional)
(7) Door closer
(8) Sequential locking control
(9) Carry bar
3.1 Parts included
• SVA lock
• Screws required for mounting
• SVA4xxx commissioning instructions
3.2 Door fittings required
Inner side of the door: Door handle or panic bar
Outer side of the door: Door knob (without function)
Locking pin: 9 mm square for interchangeable fittings

SVA 4xxx Commissioning instructions
060648-45532 – 05/2023 3
3.3 Technical data
Status messages via potential-free contacts
Contact load capacity: 100mA at max. 30 V DC
Protection category: IP54
Tubular
frame locks
Solid door
locks
Rear backset: 15mm 33mm
Distance between
door handle and
locking cylinder:
92mm
for profile
cylinder
94mm
for round
cylinder
72 mm
profile
cylinder
74 mm round
cylinder
Bolt throw: 20mm 20mm
Temperature range: -25°C to +70°C
Relative humidity: up to 95% at 55°C;
no condensation
3.4 Variants
Variants for rebated solid doors
Forend: 235 x 20mm, for profile cylinder:
• SVA4271: Backset 65mm, DIN left
• SVA4272: Backset 65mm, DIN right
• SVA4281: Backset 80mm, DIN left
• SVA4282: Backset 80mm, DIN right
• SVA4291: Backset 100mm, DIN left
• SVA4292: Backset 100mm, DIN right
Forend: 235 x 20mm, for round cylinder:
• SVA4371: Backset 65mm, DIN left
• SVA4372: Backset 65mm, DIN right
• SVA4381: Backset 80mm, DIN left
• SVA4382: Backset 80mm, DIN right
• SVA4391: Backset 100mm, DIN left
• SVA4392: Backset 100mm, DIN right
Variants for solid butt doors
Forend: 235 x 24mm, for profile cylinder:
• SVA4277: Backset 65mm, DIN left/right
• SVA4287: Backset 80mm, DIN left/right
• SVA4297: Backset 100mm, DIN left/right
Forend: 235 x 24mm, for round cylinder:
• SVA4377: Backset 65mm, DIN left/right
• SVA4387: Backset 80mm, DIN left/right
• SVA4397: Backset 100mm, DIN left/right
Variants for tubular frame doors
Forend: 270 x 24, for profile cylinder:
• SVA4719: Backset 35mm, DIN left/right
• SVA4729: Backset 40mm, DIN left/right
• SVA4739: Backset 45mm, DIN left/right
Forend: 270 x 24, for round cylinder:
• SVA4819: Backset 35mm, DIN left/right
• SVA4829: Backset 40mm, DIN left/right
• SVA4839: Backset 45mm, DIN left/right
3.5 Classification
Tubular frame locks
dormakaba Deutschland GmbH
DORMA Platz 1 - 58256 Ennepetal
0432-CPR-00026-96 18
SVA4xxxRR EN 12209:2003/
AC:2005 3 X 6 1 0 G 7 B B 2 0
DOP_0164
0432-CPR-00026-11 18
SVA4xxxRR EN 179:2008 3 7 7 B 1 4 5 2 A A
DOP_0166
0432-CPR-00026-01 18
SVA4xxxRR EN 1125:2008 3 7 7 B 1 4 2 1/2 A/B A
DOP_0167
Solid door locks
dormakaba Deutschland GmbH
DORMA Platz 1 - 58256 Ennepetal
0432-CPR-00026-19 15
SVA4xxxVB EN 12209:2003/
AC:2005 3 X 9 1 0 G 7 B B 2 0
DOP_0160
0432-CPR-00026-11 17
SVA4xxxVB EN 179:2008 3 7 7 B 1 4 5 2 A A
DOP_0162
0432-CPR-00026-02 17
SVA4xxxVB EN 1125:2008 3 7 7 B 1 4 2 1/2 A/B A
DOP_0163
4 Pin assignment
Note
For earthed door frames, the bridge on the
SVP-A x100 connection cable’s plug must be
disconnected.

dormakaba Deutschland GmbH | DORMA Platz 1 | 58256 Ennepetal | Germany
T: [phone] | www.dormakaba.com
SVA 4xxx Commissioning instructions
4.1 Block diagram
Contact definition: Position of the switches when the door is closed and locked. Door handle and cylinder not
actuated.
SVA4xxx function
Black not in use
Brown "Trip latch on", NC
Pink/gray "SVA/SVP unlocked", NO
Red not in use
White not in use
Yellow "SVP/SVA unlocked" and "Trip latch on" and cylinder contact, C
Green Cylinder contact, NO
Gray Anti-tamper circuit
Pink Anti-tamper circuit
Red/blue "SVP/SVA locked", NC
Blue “Door handle operated”, NO
Violet "SVP/SVA locked" and "Door handle operated", C
5 Mounting
See SVA/SVI assembly instructions.
https://techdoc.dormakaba.com/cds/go/SVA-SVI
SVI commissioning manuals
https://techdoc.dormakaba.com/cds/go/SVI
6 Disassembly and disposal
Disassembly is carried out in reverse order of the
mounting instructions.
The product must not be disposed of in
domestic waste.
Dispose of the product in an environmentally
friendly manner at the arranged acceptance
and collection points.
Refer to the statutory regulations for your country.