Dormakaba Grange User manual

1
The Grange
User‘s Guide

2
Programming door handing
The Grange is suitable for left hand or right hand opening doors. As a default, it is
set as a right hand. If you have a left hand opening door, please adjust the direction
of the door to correct the and icons.
a. Press the “M” button for 3 seconds
b. Press “9”
c. Press “16”
d. Motor will change direction to fit with the door direction
Repeating these steps will return the door to the original direction.
Getting started
Default Status
By factory default the Grange can be unlocked or locked pressing the
unlock or lock symbols on the screen or scanning any RFID card.
The Grange will remain in factory default mode until a user code
is created.
Indicators
This guide will assist in using the features and functions of the lock.
Please download the app dormakaba SmartLock from the app store or Google Play
or scan QR codes found on page 5.
Thank you for choosing The Grange by dormakaba
Operate successfully - buzzer long beeps
- green LED stays for 2 seconds
Operate unsuccessfully - buzzer beeps 2 times
- red LED flashes 2 times
Adjust Direction -(lock handing)
M9
1 2 3
4 5 6
7 8 9
0
Note
• M button and D button are the 2 holes found on the inside
handle below the turn knob. D is at left, M is at right side.
• M button is for setting. D button is for deleting or resetting lock.
• Each operation should be done within 5 seconds, or it will exit
the setting.
1
D button M button
6

3
Delete all RFID cards
a. Press the “D” button for 3 seconds.
b. Press “2”. A beep is heard and green symbol is shown on the screen to confirm all
cards are deleted.
Delete all user codes:
a. Press the “D” button for 3 seconds.
b. Press “1”. A beep is heard and green symbol is shown on the screen to confirm all
user codes are deleted.
Managing Users (100, combination of cards, fobs or codes)
Add a new user with an access code:
a. Press the “M” button for 3 seconds. A beep is heard and a green symbol is shown
on the screen.
b. Press “1”. A beep is heard and green symbol is shown on the screen.
c. Input a 6-12 digit user code.
d. Press the lock icon. A beep is heard and green symbol is shown on the screen.
e. A second beep is heard and green symbol is shown on the screen to confirm user
code has been added.
M1
M2
D1
D2
USER
CODE
Add a new user with an RFID card:
a. Press the “M” button for 3 seconds. A beep is heard and green symbol is shown on
the screen.
b. Press “2”. A beep is heard and green symbol is shown on the screen
c. Swipe the card on the keypad. A beep is heard and green symbol is shown on the
screen.
d. A second beep is heard and green symbol is shown on the screen to confirm user
card has been added.

4
To add One Time Code:
a. Press the “M” button for 3 seconds. A beep is heard and green symbol is shown on
the screen.
b. Press “3”. A beep is heard and green symbol is shown on the screen.
c. Input a 6-12 digit OTC.
d. Press the lock icon. A beep is heard and green symbol is shown on the screen.
e. A second beep is heard and green symbol is shown on the screen to confirm user
code has been added.
To delete all One Time Code:
a. Press the “D” button for 3 seconds.
b. Press “3”. A beep is heard and green symbol is shown on the screen to confirm all
OTC are deleted.
M3
3
D
One Time Code
This allows a user to unlock the door once. After the code is used, it cannot be reused.
This may be useful if you are expecting visitors or a delivery. The handle will take a maximum
of 10 codes at any one time.
You can find both one time and timed codes via the app, you can enter a maximum
10 of each.
Timed codes are very useful in the following scenarios:
B&B accommodation allowing guests access from 10am Friday to 10am Sunday.
Allowing your cleaner, trade person or visitors access on a certain day or time frame etc.
Auto Lock Timer
Use the Auto Lock Timer to lock the door after a specified amount of time.
a. Press the “M” button for 3 seconds. A beep is heard and green symbol is shown
on the screen.
b. Press “5”. A beep is heard and green symbol is shown on the screen.
c. Input the number of seconds that you want the door to remain unlocked for up
to 99 seconds.
d. Press the lock icon. A beep is heard and green symbol is shown on the screen.
M5
USER
CODE
0-99

5
Download and Install the app
1. Enable your mobile to scan QR Code above to download app installation
package.
2. Enable the app and login after successfully downloading and installing.
Enable and Register the app
Enable the app and enter the login interface, then click “Change the Login Model”
and authenticate user by password, gesture or fingerprint, ensuring the Bluetooth
function in phone is turned on. You can enter device management automatically
after successful login.
iOS Apple Store Google Play
Login By Fingerprint
Login By Gesture
Login By Password
Cancel

Login By Fingerprint
Please enter password
Login
Login By Gesture
Login By Password
Cancel
Login By Fingerprint
Login By Gesture
Login By Password
Cancel
Click to unlock with fingerprint
Switch to Password Login Switch to Gesture Login Switch to Fingerprint Login
Using the dormakaba Smart Lock app

6
Bind Devices
1. Enter the device interface and click the binding icon “+” on the bottom;
2. On the device binding interface, click the code scanning icon ” “, Scan the Device
Number QR code which you will find on the back of the battery pack and enter
the mobile phone number and click “start binding”.
3. When the app sending request of binding and the lock prompts “In operation”,
press “M” button (right hand side) on the back lock body.
4. Choose the default name or input a new name, following the instruction
“Please name this device” and click “save” button to confirm.
Device Management
Refresh device information: Enter device management interface and press one
binding device until a selection menu pops up. Click “Refresh Device Information” to
synchronize the data in app and smart lock system.
Unbind the device: Enter device management interface and press one binding device
until a selection menu pops up. Click “Unbind the Device” and then click“OK” to delete
the device from the app device list.
Bind icon
Unlocking: enter management
Interface and click the unlocking
icon “ “.
The smart lock is unlocked.
Locking: enter management Interface,
and click the locking icon ” “.
The smart lock is successfully locked.
Note
• One app can be bound with maximum 10 devices.
D button
M button

7
View the Device Information
1. Click the binding device after bound with the smart lock successfully.
2. Enter the “Device Information” Interface, view and modify the smart lock
name and view the smart lock user list, capacity, binding list, current time,
power capacity, product model, firmware version number and device number
(scroll view on the device information interface).
Time synchronization: enter the “device information” interface, click “current time”
to synchronize smart lock and app time, and the function is only available to
administrator’s account.
Binding list: Enter the “Device Information” interface and click “Bind List” to
display the mobiles bound with the smart lock. Click the deleting icon “” on the
right of the user you want to delete and then click “OK” to confirm the operation.
Shake to unlock: Enter the “Device Information” interface and shake your mobile to
unlock.
Note
• Shaking to unlock can be enabled only when the mobile is connected with the
lock successfully and the distance between them must be within 10 meters.
• The first mobile successfully bound with the smart lock is the administrator.
Only the administrator has the right to synchronize the time and unbind other
devices on the bind list.

8
Bluetooth Key Sharing
1. Enter device management interface and press a binding device until a selection
menu pops up. Then click “Bluetooth Key Sharing”.
2. Choose the start date, time and valid period, and click “generates key”.
3. Click the sharing icon “ ”to share the new key to other users via email, WhatsApp,
SMS, WeChat, QQ, etc. The receiver can input the key to open the door.
Note
• Only the administrator is equipped with “Bluetooth Key Sharing” on the
management interface.
• When single valid term is selected, only 10 Bluetooth keys can be shared, 10+ keys
can be shared but the door cannot be opened.
• The shared keys are valid for use within 24 hours; if you select other time ranges,
the Bluetooth key sharing is not restricted.
View Message
1. Click “All Devices” after entering “Message” interface.
2. Select a device name, click “All Messages” to unfold options
including “All Messages”, “Open Messages”, “User Messages”,
“Operation Messages”and “Alarm Messages”. You can click “All
Times” to unfold operations including “All Times”, “Recent 1
day”, “Recent 7 days”, “Recent 15 days”, “Recent 30 days” and
“Custom time zones”.
3. Select the required message type or time zone to view.
Synchronize Message: In the “Message” interface, press a lock
icon until a dialogue box pops up on the bottom of the screen and
click “Synchronize” to keep the message on the app in line with the
smart lock system.
Note
• In the “Message” interface, press a lock icon until a dialogue box pops up on the
bottom of the screen to select “All” or delete some certain records.
• The Android users can operate the app following above instruction, operation
system is slightly different for IOS users. The mobile app shall prevail in actual
operation and menu.

9
Lock Management through Mobile
Note
• This flow chart only introduces how to manage locks through mobile.
The app shall prevail in the actual operation and menu.
After installing the app in your mobile successfully, enable your mobile
Bluetooth, login, bind your mobile with the lock and enter lock management:
Language Setting
1. Click “Settings” in your mobile and enter the “Language” interface and choose
the language you want.
2. Enable the app to find the device, message and setting interfaces has been
synchronized.
Unlock
Unbind
device
Lock
Refresh
information
Download
all records
Bluetooth
Key Sharing
View User
Message
Shake to
unlock
Device
Management
Message
Management
Interface
Settings
View Message
Device information
Device information
Hold on to the selected
lock name
Hold on to the selected
lock name
Hold on to the selected
lock name
Hold on to the selected
lock name
Click on the selected
lock name
Click on the selected
lock name
Refresh device information
Unbind device Click OK to confirm
Download
all
records
Share your
bluetooth key
Choose the start date,
time and valid period Generates Key
View or Change Device Name, User List, Capacity,
Current Time, Battery, Product Module, etc.
Shake the phone to unlock
Choose Message Type Including:“All Messages”, “Open Messages”,
“User Messages”, “Operation Messages”and “Alarm Messages”.
Choose Period Time: including “All Times”, “Recent 1 day”, “Recent 7
days”, “Recent 15 days”, “Recent 30 days” and “Custom Time Zone”.
Click “Login Settings”
Click “Autosync”
Click “Time Format”
Click “Message Hints”
Click “About Us”
Switch Login Model and Change
Records in app changes in
accordance with lock system
Choose the required format
In the app, the generated new
messages are hint in sound and
vibration, enable/disenable setting
Get the latest version

10
Always open mode
This stops the door from locking and puts it into passage mode.
Useful when gardening, bringing groceries in from the car etc.
After gaining access through the code or smart card, Press 1 and unlock
icon within 5 seconds to activate Always-Open mode. The door will now
remain unlocked.
The lock will flash green every 5 seconds to remind you the door is in the unlocked position.
To deactivate Always-Open mode, press the lock icon.
Code scrambling technology
When entering your access code, you can add numbers before and/or
after the code to disguise it from onlookers. A maximum of 20 numbers
can be entered – including the access code.
Factory Reset
Press the D button for 3 seconds, then press unlock icon 6 times.
Other features
If an incorrect code is entered 5 times, the lock will go into lockout
mode for 3 minutes.
The buzzer will beep 10 times and the red LED will flash 10 times.
When the battery is low, the system will indicate this each time the
door is opened by beeping 5 times and the LED will flash 5 times.
To change the batteries, undo screw at the bottom of internal handle
then pull battery case out. Requires 8x AA Alkaline batteries.
When the maximum of 100 access codes and/or cards have been
programmed, the buzzer will beep twice, and the red LED will stay on
for 10 seconds.
Trouble shooting
If the lock and unlock icons are reversed, see the information on page 2.
Please check the Grange Installation manual for more technical information.
Cleaning and maintenance
For general cleaning, regularly remove dust and dirt with a soft cloth. For
persistent marks use a soft damp cloth with a touch of water only and wipe
in the direction of the grain to prevent any cross scratching. Do not apply
household cleaners or bleaches and avoid hard rubbing and scrubbing.
D