Dormakaba SVI Series User manual

EN
SVI Lock
Mounting instructions WN 059741 45532/14540
2019-12
Contents
1 Information about this document 2
1.1 Contents and purpose 2
1.2 Target group 2
1.3 Other applicable documents 2
1.4 Abbreviations 2
1.5 Symbols used 2
1.5.1 Hazard categories 2
1.5.2 More symbols 2
2 Safety 3
2.1 Intended use 3
2.2 Not intended use 3
2.3 Limitations on use 3
3 Product description 4
3.1 Installation situation 4
3.1.1 Mechanical opening 4
3.1.2 Automatic opening 4
3.2 Technical information 5
3.3 Variants 5
3.4 Overview 6
3.4.1 Tubular frame locks 6
3.4.2 Solid door locks 6
3.5 Classification 7
3.5.1 Tubular frame locks 7
3.5.2 Solid door locks 7
3.6 Tubular frame locks 8
3.6.1 Parts included 8
3.6.2 Lock dimensions 8
3.7 Solid door locks 8
3.7.1 Parts included 8
3.7.2 Lock and forend dimensions 9
3.7.3 Door versions 9
3.8 Other components 10
3.8.1 Masking plate 10
3.8.2 Rod striking plate 10
3.8.3 Switch lock 10
3.8.4 Lower rod guide 10
4 Mounting 11
4.1 Safety during mounting 11
4.2 Requirements for mounting 11
4.3 Preparatory work 12
4.3.1 Mill-cut and drill door leaf for tubular
frame locks 12
4.3.2 Mill-cut and drill the door leaf for solid
door locks 13
4.3.3 Prepare the floor for the masking plate
14
4.3.4 Prepare the door frame for the rod
striking plate 14
4.3.5 Prepare the door leaf for the switch lock
14
4.3.6 Prepare the door leaf for the lower rod
guide 14
4.4 Mount locks 15
4.4.1 Mount tubular frame lock 15
4.4.2 Mount solid door lock 16
4.5 Mount fixed leaf 18
4.5.1 Mount espagnolette bolt 18
4.5.2 Adjust upper espagnolette bolt 20
4.6 Fix upper espagnolette bolt 21
4.6.1 Tubular frame lock 21
4.6.2 Solid door lock 21
4.7 Mounting active leaf 22
4.8 Mounting fittings 22
5 Displays 22
5.1 LED display 22
6 SVA2000F integrated Power Reserve module
test 22
7 Pin assignment SVI2000(F) 22
8 Complete mounting 23
9 Error messages 23
10 Maintenance 24
11 Disassembly and disposal 24

1 Information about this
document
1.1 Contents and purpose
SVI locks are mounted in the fixed leaf and SVA
locks in the active leaf of a 2-leaf unit. The locks are
available in various designs for tubular frame doors
and solid doors. This manual describes how to mount
an SVI lock and how to mount the components from
the other sets required.
1.2 Target group
The locks must only be mounted by technically
qualified personnel.
1.3 Other applicable documents
• Manual for the connection cable SVP-A1100/2100
(not necessary for SVI5000)
• Mounting instructions for the SVA lock on the active
leaf
• Mounting instructions for the components used, e.g.
the door handle
1.4 Abbreviations
SVI
Inactive, self-locking (anti-)panic
lock for the fixed leaf in 2-leaf
door units
SVA
Active, self-locking
(anti-)panic lock for the active
leaf in 2-leaf door units
2000/2000F,
4000, 5000
All versions of a lock; the exact
lock type is marked with 3 digits
instead of zeros.
RR Tubular frame locks
VB Solid door locks
G Active leaf
S Fixed leaf
1.5 Symbols used
1.5.1 Hazard categories
WARNING
This signal word indicates a possible
hazardous situation which may result in
death or serious injury if not averted.
ATTENTION
This signal word indicates a situation of
potential risk, which could lead to damage
to property or the environment if not
averted.
Example of an integrated warning
Caution!
Danger of injury from cutting!
1.5.2 More symbols
TIPS AND RECOMMENDATIONS
This signal word indicates useful information
for efficient and trouble-free operation.
1. 2. Sequence of action steps
12Item numbers used in image
caption
2SVI Lock 2019-12
dormakaba Mounting instructions Information about this document
WN 059741 45532

2 Safety
Fig. 1
Color
Do not damage the product
2.1 Intended use
SVI locks are used to lock doors automatically and
securely each time they are closed.
The locks can be opened from the panic side either via
the fixed or active leaf in the escape direction at any
time via the fitting.
• Only mount combinations of lock and fitting that
have been tested and approved in accordance with
EN179 or EN1125. The list of approved components
can be found in the constancy of performance
certificate at www.dormakaba.com. Other
combinations on request.
• Use only in combination with the SVA locks offered
by dormakaba. Combinations with locks from other
manufacturers must be approved by dormakaba.
• Panic locks may only be mounted on fire and
smoke protection doors if the usability certificates
for these doors provide for the mounting, and if
the requirements in the usability certificates are
followed.
• The following SVI locks are suitable for use on fire
and smoke protection doors: SVI5000, SVI4000,
SVI2000F.
• The SVI 2000 may only be used in fire and smoke
protection doors in combination with the external
Power Reserve module "SVP-PR DCW®" (item no:
70922601).
2.2 Not intended use
• The lock may not be opened by third parties. If
the lock is opened by a third party, there is a risk
that safety-relevant functions (e.g. escape/panic
functions) will no longer exist.
• The identification plate on the lock contains
important information required by law and must
not be damaged or obscured.
2.3 Limitations on use
• Cannot be combined with SVP locks.
• Do not make any changes to the door unit that are
not described in this manual.
• If door seals (e.g. profile seals, floor seals) are used,
they must not impede the intended function.
3
SVI Lock 2019-12
dormakaba Mounting instructions Safety
WN 059741 45532

3 Product description
The SVI lock on the fixed leaf serves as a strike box
for the SVA lock. The SVI lock locks automatically by
extending the espagnolette bolt as soon as the fixed
leaf is closed.
The SVA lock on the active leaf locks automatically
after each closing by automatically pushing the bolt
forward into the SVI lock (insurance-compliant lock).
At the same time, the cross latch locks so that a two-
point locking system is created. This offers additional
security against manipulation or breaking of the door.
In case of emergency, the locks can be unlocked and
opened at any time in the escape direction. These
features ensure that locks comply with EN 179 for
emergency exit locks and EN 1125 for panic exit locks.
The SVI locks 4000, 2000 and 2000F can query the
status of the espagnolette bolt and the door handle/
panic bar.
3.1 Installation situation
3.1.1 Mechanical opening
Fig. 2
12
7
3
5
6
8 9
S G
4
Mechanical installation situation (example)
1 Active leaf with SVA 5000 (SVA 4000 or 6000)
2 Fixed leaf with SVI 5000 (SVI 4000)
3 Panic door fitting
4 Cable transfer CT, cable spiral CS and if necessary
detachable cable transfer DT
5 Connecting cable SVP-A 1100/2100
6 External control unit
7 Door closer
8 Sequential locking control
9 Carry bar
3.1.2 Automatic opening
Fig. 3
12
5
6 7 8
9
3
S G
4
Electrical installation situation (example)
1 Active leaf with SVA 2000/2000F
2 Fixed leaf with SVI 2000F
3 Panic door fitting
4 Cable transfer CT, cable spiral CS and if necessary
detachable cable transfer DT
5 Connecting cable SVP-A 1100/2100
6 Operator inc. control unit (e.g. ED100/250)
7 Sequential locking control
8 Carry bar
9 Access control components
4SVI Lock 2019-12
dormakaba Mounting instructions Product description
WN 059741 45532

3.2 Technical information
All SVI locks
Temperature range -25°C to +70°C
Relative humidity: up to 95% at 55°C;
no condensation
DIN direction: can be used left/right
Installation position: vertical
Tubular
frame locks
Solid door
locks
Backset: 35, 40 or
45mm
65, 80 or
100mm
Rear backset: 15mm 33 mm
Nut to inner square: 9mm 9mm
Forend 24 mm wide 20 mm or
24mm wide
SVI5000
Forend 310mm high,
angular/
square
235 mm
high, round
SVI4000
Forend 310mm high,
angular/
square
235 mm
high, round
Contact load capacity: 100mA at max. 30VDC
Bolt contact’s contact
load capacity:
0.5A at max. 30VDC *
SVI2000 and SVI 2000F
Forend: 380mm
high,
angular/
square
235 mm
high, round
Supply voltage: 24VDC stabilized
(+/- 15%)
Max. power
consumption:
0.5A
Quiescent current
consumption:
0.08 A
Bolt contact’s contact
load capacity:
0.5A at max. 30V DC
“Locked” signal: output switches to GND,
30mA at max. 30VDC
*only for special items
3.3 Variants
Versions of the SVI locks are available for various
applications:
• The SVI 5000 is a mechanical lock. When the door is
closed, the lock locks automatically.
• The SVI4000 is an electrically monitored
lock. When the door is closed, the lock locks
automatically.
• The SVI2000 is a motorized lock whose function
can be controlled electronically. When the door is
closed, the lock locks automatically. It is operated
separately (Stand Alone) or on an external control
unit via a DCW® bus or a CAN bus. The SVI 2000
can be switched to "permanently open". Operation
on an electric door operator with integrated control
unit is also possible, e.g. with the ED100/ED250.
The SVI 2000 may only be used in fire and smoke
protection doors in combination with the external
Power Reserve module "SVP-PR DCW®" (item no:
70922601)!
• The SVI2000F is a motorized lock with the same
functions as the SVI2000, which is also approved
for use in fire and smoke protection doors. The
SVI2000F contains an integrated Power Reserve
module. The SVI2000F cannot be switched to
"permanently open" because this function is not
permitted for use on fire and smoke protection
doors.
5
SVI Lock 2019-12
dormakaba Mounting instructions Product description
WN 059741 45532

3.4 Overview
3.4.1 Tubular frame locks
Fig. 4
SG
optional
SVI
SVA
Fixed leaf with tubular frame lock
3.4.2 Solid door locks
Fig. 5
SG
optional
SVA
SVI
Fixed leaf with solid door lock
6SVI Lock 2019-12
dormakaba Mounting instructions Product description
WN 059741 45532

3.5 Classification
3.5.1 Tubular frame locks
dormakaba Deutschland GmbH
DORMA Platz 1 - 58256 Ennepetal
0432-CPR-00026-11 18
SVI2000 RR
EN 179:2008
3 7 7 B* 1 4 5 2 A C
SVI2000F RR
SVI4000 RR
SVI5000RR
3 7 7 B 1 4 5 2 A C
DOP_0166
0432-CPR-00026-01 18
SVI2000RR
EN1125:2008
3 7 7 B* 1 4 2 1/2 A/B C
SVI2000FRR
SVI4000 RR
SVI5000RR
3 7 7 B 1 4 2 1/2 A/B C
DOP_0167
* only with external PR module “SVP-PR DCW®” (item
no: 70922601)
3.5.2 Solid door locks
dormakaba Deutschland GmbH
DORMA Platz 1 - 58256 Ennepetal
0432-CPR-00026-11 18
SVI2000 VB
EN 179: 2008
3 7 7 B* 1 4 5 2 A C
SVI2000F VB
SVI4000 VB
SVI5000VB
3 7 7 B 1 4 5 2 A C
DOP_0162
0432-CPR-00026-02 18
SVI 2000 VB
EN1125: 2008
3 7 7 B* 1 4 2 1/2 A/B C
SVI 2000F VB
SVI4000 VB
SVI5000VB
3 7 7 B 1 4 2 1/2 A/B C
DOP_0163
* only with external PR module “SVP-PR DCW®” (item
no: 70922601)
7
SVI Lock 2019-12
dormakaba Mounting instructions Product description
WN 059741 45532

3.6 Tubular frame locks
3.6.1 Parts included
Fig. 6
1
3
2
4
Parts included
1 SVI Lock
2 Forend (pre-mounted if necessary)
3 Screws for mounting the lock
4 Screws for mounting the forend
Other required sets
• SVI Accessories Set 24mm or
SVI Accessories Set 20mm
• Lower espagnolette bolt
• Upper espagnolette bolt
• Masking plate (depending on item ordered)
3.6.2 Lock dimensions
Fig. 7
318,5
23
8,2
94
21,5
8,2
35
20
3
62,5
180,5
356
194
359,5
2 ,526
380
24
OKFF
1050
124,5
12,5
14,5
3040 41
13
32,7
□9
35
15
(40)
(45)
2
28,8
ø7
ø10
90°
12
SVI 2000/2000F
Fig. 8
23
94
20
3
286
OKFF
1050
□9
2
28,8
ø7
ø10
90°
12
21,5
35
15
(40)
(45)
126,4
251 292,5
62,5
1 0,51
156,5
3 01
24
124,5
12,5
14,5
3040 41
13
8,2
8,2
SVI 4000 / SVI 5000
3.7 Solid door locks
3.7.1 Parts included
Fig. 9
1
3
4
2
Parts included
1 SVI Lock
2 Forend (pre-mounted if necessary)
3 Screws for mounting the lock
4 Screws for mounting the forend
Other required sets
• SVI Accessories Set 24mm or
SVI Accessories Set 20mm
• Lower espagnolette bolt
• Upper espagnolette bolt
• Masking plate (depending on item ordered)
8SVI Lock 2019-12
dormakaba Mounting instructions Product description
WN 059741 45532

3.7.2 Lock and forend dimensions
Fig. 10
209
13
3
65/80/100
35
38
6,8
38
2,5
ø7
33
6,8
6,8
9
102
78
2,5
7
63
83,9
20,5
16,5
165
133
235
58
62,5
24 24
12
13,2
235
19
ø6
90°
ø10
OKFF
1050
X
Y
20
R10
235
12
Position of the espagnolette bolt variable (4.4.2 on page16)
X = Backset - 35
Y = Backset - 27
C/D C/DA/B
Lock and forend dimensions
(forend depending on item ordered)
3.7.3 Door versions
Fig. 11
SVASVI
SVISVA
A/B
Folding doors Fig. 12
SVI SVA
SVISVA
C/D
Rebated doors
9
SVI Lock 2019-12
dormakaba Mounting instructions Product description
WN 059741 45532

3.8 Other components
3.8.1 Masking plate
Fig. 13
20
53
33
60
80
R7.5
ø5.9
ø10.9
90°
1.2
Masking plate dimensions
Fig. 14
±2
60
ø6
ø10.9
90°
2
80
50
ø25
30
Adjustable masking plate (optional)
3.8.2 Rod striking plate
Fig. 15
ø10.5x90°
ø5.5
64.5
80
20/24
60
22
8.75
12
3
40
Rod striking plate dimensions
3.8.3 Switch lock
Fig. 16
ø10.5x90°
ø5.5
54
42
20/24
3
40
ø18.5
Switch lock dimensions
3.8.4 Lower rod guide
Fig. 17
ø10.4
60
20
40
20
ø15
13
3
ø11.6x90°
ø6
Lower rod guide dimensions
10 SVI Lock 2019-12
dormakaba Mounting instructions Product description
WN 059741 45532

4 Mounting
4.1 Safety during mounting
WARNING
Danger to life from crowding in front of a
jammed door.
If the door leaf is deformed by more than
5mm, the door may not always open
reliably!
• SVI/SVA locks should only be installed in
doors with a maximum deformation of
5mm!
• In case of more severe deformation, verify
that the door opens reliably with the
fitting!
WARNING
Danger to life due to incorrect mounting on
fire and smoke protection doors.
Mounting on fire and smoke protection
doors is only permitted if the usability
certificates for these doors provide for the
mounting.
• Observe the requirements in the usability
certificates.
TIPS AND RECOMMENDATIONS
• The mounting is shown on a DIN-left door.
For a DIN-right door, the procedure must
be mirror-inverted.
• The mounting is shown with a long plate.
For other door fittings, other mounting
points may have to be used.
4.2 Requirements for mounting
• The door corresponds to the specifications in Fig. 18
and is deformed by a maximum of 5mm.
• For mounting along escape routes:
The door opens in the escape direction. If the door
opens in the opposite direction to the escape
direction, a building authority permit must be
obtained.
• There are recesses and pre-drilled holes in the (fixed
leaf) door leaf (see chapter4.3).
• For all locks except SVI5000:
The door leaf is equipped with the connection cable
SVP-A1100/2100.
Fig. 18
max. 1300 max. 1300
2.5-5
max. 2500
2-7 2-7
1050
FFL
max. 250 kg max. 250 kg
Requirements for the door
11
SVI Lock 2019-12
dormakaba Mounting instructions Mounting
WN 059741 45532

4.3 Preparatory work
4.3.1 Mill-cut and drill door leaf for tubular
frame locks
Fig. 19
25
22
R6
131,5 204,5
214,5
141,5
*1)
OKFF
1050
*1)
ø10
10
10
*2)
2 51,
32/3742/
15
90
131
7,5
*1) ST 3.9x19 A2-70 (EN ISO 7050)
*2) 45 at backset 35
50 at backset 40
55 at backset 45
SVI 2000/2000F Fig. 20
25
2 51,
22
R6
131,5 133,5
144,5
141,5
*1)
ø10
15
90
131
7,5
10
10
*2)
*1)
32/3742/
OKFF
1050
*1) ST 3.9x19 A2-70 (EN ISO 7050)
*2) 45 at backset 35
50 at backset 40
55 at backset 45
SVI 4000/SVI 5000
12 SVI Lock 2019-12
dormakaba Mounting instructions Mounting
WN 059741 45532

4.3.2 Mill-cut and drill the door leaf for solid door locks
Fig. 21
85
75
1
24
13
0
18
13
235
+
209
85
75
1
24
13
0
18
13
235
+
209 185
73
3
55
38
19
ø7
ø7
ø22
OKFF
1050
6,8
2,5
38
6,8
6,8
65/80/100
2,5
6,8
78
DIN left DIN right
min. ø15
min. ø15
X/Y
X = Backset - 35
Y = Backset - 27
Recesses and pre-drilled holes in door leaf with a lipped forend
Fig. 22
185
73
3
38
ø7
ø7
ø22
OKFF
1050
85
1
24
13
0
18
13
235
+
209
55
19
6,8
2,5
38
6,8
6,8
65/80/100
2,5
6,8
78
min. ø15
min. ø15
X/Y
X = Backset - 35
Y = Backset - 27
Recesses and pre-drilled holes in door leaf with a flat forend
Fig. 23
185
73
38
ø7
ø7
ø22
OKFF
1050
1
13
0
13
235
+
209
13
3
R10
3
55
19
6,8
2,5
38
6,8
6,8
65/80/100
2,5
6,8
1
13
0
13
235
+
209
13
3
R10
78
min. ø15
min. ø15 DIN rightDIN left
X/Y
X = Backset - 35
Y = Backset - 27
Recesses and pre-drilled holes in door leaf with an angled forend
13
SVI Lock 2019-12
dormakaba Mounting instructions Mounting
WN 059741 45532

Fig. 24
180
50
min. 8ø
SVI 2000
SVI 2000F
SVI 4000
SVI 5000
Recesses and pre-drilled holes in the door leaf for
wiring
4.3.3 Prepare the floor for the masking
plate
Variant X mm
PHA 2122-0 (0 mm) 26.5
PHA 2122-2 (2 mm) 24.5
PHA 2122-4 (4 mm) 22.5
Fig. 25
80
53
26
45
23.5
X
33
60
Recesses for the masking plate
Fig. 26
±2
60
33
ø 26
Recess for an adjustable masking plate (optional)
4.3.4 Prepare the door frame for the rod
striking plate
Fig. 27
80
21/25
61
13
341
20
Recesses for the rod striking plate
4.3.5 Prepare the door leaf for the switch
lock
Fig. 28
55
42
21/25
3
42
ø20
90°
Recesses for the switch lock
4.3.6 Prepare the door leaf for the lower
rod guide
Fig. 29
61
21
40
20
ø16
14
3
Recesses for the lower rod guide
14 SVI Lock 2019-12
dormakaba Mounting instructions Mounting
WN 059741 45532

4.4 Mount locks
4.4.1 Mount tubular frame lock
1. Adjust the forend (Fig. 30).
Fig. 30
X
X
X
45°
X
Dimensions of the adjustments
2. If necessary, screw the forend to the lock with 1.5
Nm (Fig. 31).
TIPS AND RECOMMENDATIONS
Only use the self-locking screws supplied.
If these screws are loosened again, they
must be replaced by new self-locking screws.
Fig. 31 Screw on forend
3. Pull in the connecting cable SVP-A 1100/2100 and
connect it to the lock (Fig. 32).
Fig. 32
SVI 2000
SVI 2000F
SVI 4000
SVI 5000
SVP-A 1100/2100
100
Connect cable
15
SVI Lock 2019-12
dormakaba Mounting instructions Mounting
WN 059741 45532

4. Insert the lock into the door leaf recess (Fig. 33).
Fig. 33
1.
2.
Insert lock
5. Screw lock tight (Fig. 34)
Fig. 34 Screw lock tight
4.4.2 Mount solid door lock
1. Adjust the forend (Fig. 35).
Fig. 35
X X
X
45°
X
Dimensions of the adjustments
2. If necessary, screw the forend to the lock (Fig. 36)
with 1.5 Nm according to the DIN direction of the
door.
TIPS AND RECOMMENDATIONS
Only use the self-locking screws supplied.
If these screws are loosened again, they
must be replaced by new self-locking screws.
Fig. 36 Screw on forend
16 SVI Lock 2019-12
dormakaba Mounting instructions Mounting
WN 059741 45532

WARNING
Danger to life from jammed door.
Incorrect positioning of the grub screw at
the top of the lock may prevent the door
from opening reliably!
• If necessary, change the screw-in position
of the espagnolette bolt.
3. Fully screwe out one of the grub screws at the
top of the lock (Fig. 37). At this position the
espagnolette bolt will be screwed in later.
TIPS AND RECOMMENDATIONS
Only use the self-locking screws supplied.
If these screws are loosened again, they
must be replaced by new self-locking screws.
Fig. 37
2.
1.
Screw out grub screw
ATTENTION
Risk of property damage due to missing
grub screw.
A missing grub screw at the top of the lock
can cause the lock to be damaged!
• Always screw the grub screw back into the
lock.
4. To change the screw-in position of the
espagnolette bolt if necessary: Screw the grub
screws at the top of the lock from one drill hole to
the other.
HINWEIS
If necessary the grub screws must be
replaced by new self-locking screws.
5. Pull in the connecting cable SVP-A 1100/2100 and
connect it to the lock (Fig. 38).
Fig. 38
SVI 2000
SVI 2000F
SVI 4000
SVI 5000
SVP-A 1100/2100
Connect cable
6. Insert the lock into the door leaf recess (Fig. 39).
Fig. 39
Compressed air
air comprimé
Druckluft
Insert lock
17
SVI Lock 2019-12
dormakaba Mounting instructions Mounting
WN 059741 45532

7. Screw lock tight (Fig. 40)
Fig. 40 Screw lock tight
4.5 Mount fixed leaf
TIPS AND RECOMMENDATIONS
• The parts to be mounted are included in
the other required sets.
• Observe the mounting sequence. Mount
the espagnolette bolts completely before
mounting the complete fixed leaf.
4.5.1 Mount espagnolette bolt
1. Adjust the preload of the spring on the upper
espagnolette bolt in relation to the door height
according to the table (Fig. 41).
Door height in m Number of spacers
2 - 2.55 0
2.55 - 2.85 * 1
2.85 - 3.15 * 2
3.15 - 3.50 * 3
* Special size
Fig. 41
1.
2.
Mount spacers
2. Determine and mark the length of the upper
espagnolette bolt (Fig. 42).
Fig. 42
X
Determine the length of the upper espagnolette bolt
3. Determine and mark the length of the lower
espagnolette bolt (Fig. 43).
Fig. 43
X
Determine the length of the lower espagnolette bolt
4. Shorten the two espagnolette bolts to the
determined length and deburr.
5. Completely insert the plastic plug into the upper
espagnolette bolt (Fig. 44).
18 SVI Lock 2019-12
dormakaba Mounting instructions Mounting
WN 059741 45532

Fig. 44 Insert plastic plug
6. Insert the locking clamp into the SVI lock (Fig. 45).
Fig. 45 Insert locking clamp
7. Mount the lower guide for the espagnolette bolt
on the fixed leaf (Fig. 46).
Fig. 46
M5 x 20, A2-70
Spax 4.5 x 30
Mount lower guide
8. Insert the upper espagnolette bolt into the fixed
leaf and screw it completely into the lock by hand
(Fig. 47) so that the espagnolette bolt can still be
adjusted later.
Fig. 47 Screw in upper espagnolette bolt
9. Insert the lower espagnolette bolt into the fixed
leaf and screw it into the lock with 3.5 Nm (Fig.
48).
Fig. 48
3.5 Nm
Screw in lower espagnolette bolt
10. Remove the locking clamp from step 6 from the
SVI lock.
11. Mount the switch lock at the top of the fixed leaf
so that the inclined surface faces the door frame
(Fig. 49).
19
SVI Lock 2019-12
dormakaba Mounting instructions Mounting
WN 059741 45532

Fig. 49
M5 x 20, A2-70
Spax 4.5 x 30
90° ±0.5°
Mount switch lock
12. Function test: Operate the switch lock and check
whether the rod extends (Fig. 50).
Fig. 50
1.
2.
Perform a function test
13. Operate the lock so that the espagnolette bolts
are retracted.
14. Mount the fixed leaf and align it in the door frame
(Fig. 18).
15. Mount the masking plate for the lower
espagnolette bolt in the floor (Fig. 51).
Fig. 51
optional
Mount masking plate
16. Adjust the rod striking plate (Fig. 52).
Fig. 52
X
X
X
45°
Dimensions of the adjustments
17. Mount the rod striking plate for the upper
espagnolette bolt in the door frame (Fig. 53).
Fig. 53
M5 x 20, A2-70
Spax 4.5 x 30
Mount rod striking plate
4.5.2 Adjust upper espagnolette bolt
1. Disassemble the switch lock again.
2. Operate the lock or push the upper espagnolette
bolt fully into the lock.
3. Open the fixed leaf.
4. Completely attach the adjusting tool with the
smooth side on the espagnolette bolt (Fig. 54).
20 SVI Lock 2019-12
dormakaba Mounting instructions Mounting
WN 059741 45532