Dormakaba 8H Series User manual

I8HTrim-1F 2/2017
8H Series Lever Trim Instructions
95071947 www.dormakaba.com 1-800-523-8483
See proper trim template when required. Several lever styles available “R” lever shown see catalog.
8H*23 8H*08/098H*03R
8H02DT 8H*08/09EP (Euro profile)
Standard 1 1/8” mortise
cylinder, with DORMA
#16 cam.
(*)
“Mortise” cylinder installation
“Rim” cylinder installation
“Mortise” cylinder specifications
Mortise cylinder
Cylinder adapter
Cylinder nut
8H trim assembly
“09” screw
Adapter mounting
screws (4)
Standard rim cylinder & ring
8H trim assembly
80CK mounting kit
Insert mortise cylinder thru adapter,
secure with supplied cylinder nut.
Insert adapter assembly thru 8H trim
assembly and secure with (4) supplied
screws.
For “09” function (trim locked when key
is removed) install additional long
screw as shown.
Install handle for proper hand and
secure with Allen headed screw located
in 8H trim assembly.
“EP”cylinder installation
“EP” cylinder
“EP” cylinder adapter
8H trim assembly
Set screw
“09” screw
Adapter mounting
screws (4)
Insert “EP” cylinder thru adapter,
secure with supplied set screw.
Insert adapter assembly thru 8H trim
assembly and secure with (4) supplied
screws.
For “09” function (trim locked when key
is removed) install additional long
screw as shown.
Install handle for proper hand and
secure with Allen headed screw located
in 8H trim assembly.
(See backside for 8H assembly to chassis installations)

I8HTrim-1B 2/2017
8H Series Trim To Chassis Instructions
95071947B www.dormakaba.com 1-800-523-8483
4 Post mounting for added security (preffered method)
8H trim assembly
8000 series
chassis assembly
(2)12-24 flat head
mounting screws
(2)12-24 flat head
mounting screws &
finish washers.
Note: Lever not shown must
be installed prior to installing
trim to door and chassis.
Note: (2) additional 12-24
chassis mounting screws
must be installed above and
below latch bolt.
Optional (3) post mounting; (third screw will be hidden under rail, may require countersinking)
8H trim assembly
8000 series
chassis assembly
(2)12-24 flat head
mounting screws
Note: Lever not shown must
be installed prior to installing
trim to door and chassis.
Note: (2) additional 12-24
chassis mounting screws
must be installed above and
below latch bolt.
Third long post will
require removal of two
short post and be added
as shown. Note: Holes
still have to be drilled
for studs of other two
standoffs.
Preferred: (4) post mount Optional: (3) post mount
RHR LHR RHR LHR
Not To Scale
See Template T8000-7 packed with device for proper hole location and diameter.
(4) Thru door
for trim mount
(2) Outside
face only for
stud clearance
(3) Thru door
for trim mount
(1) Thru door
for spindle