Dormakaba T900 User manual

Installation instructions
T900 Tubular Lock
76019012 02/18 www.dormakaba.us
1 - INSIDE LEVER ASSEMBLY
2 - OUTSIDE LEVER ASSEMBLY
3 - SPINDLE/SPRING (2)
4 - LATCHBOLT ASSEMBLY
5 - LATCH FACEPLATE
6 - LATCH/STRIKE SCREWS
7 - STRIKE
8 - DUST BOX
9 - LOCKING PIN (T940 ONLY)
10 - MOUNTING SCREWS
11 - INSIDE ROSE
Tools required
Phillips screwdriver
1” hole saw
2-1/8” hole saw
Chisel (wood only)
1
11
10
9
8
7
6
5
4
3
2
3
10
1.1 Prepare door - use included template
Fig 1
BACKSET
5/32”
[4]
DEEP
Ø1”
[25.4]
HOLE
1” or 1-1/8”
[28.6]
2-1/4”
[57.2]
Ø2-1/8”
[54.0]
HOLE
1.2 Prepare frame for strike plate
Fig 2
(2) COMBO SCREWS
T & FL STRIKE - #8-32
ANSI STRIKE - #12-24
1 Tubular lock installation
℄OF LATCH
FRONT AND
STRIKE
NOTE: T-strike is typical
for this lock set.
NOTE: See product
section of website for
other available strike
templates.

Installation instructions
www.dormakaba.us76019012 02/18
REHAND LATCH:
PULL PLUNGER AND
ROTATE 180°.
NOTE:
THREADED HOLE MUST FACE
INSIDE OF DOOR.
(2) COMBO SCREWS
#8-32 X 3/4"
1.3 Secure latch to door 1.4 Secure lever to door
Fig 3 Fig 4
1.3.1 Rehand latch if necessary.
1.3.2 Secure latch to door using
included fasteners.
1.4.1 Slide spindles into both sides
of the latch.
1.4.2 Install inside and outside lever
assemblies through door.
1.4.3 Secure with included
fasteners.
1.4.4 Slide rose over inside lever
and secure with included pin.
(2) SCREWS
#10-32 X 1"
SPINDLE
SPINDLE
INSIDE ROSE
INSIDE
LEVER
ASSEMBLY
OUTSIDE
LEVER
ASSEMBLY
PIN
Fig 1
2 Dummy trim installation
LOCK
℄
13/16"
[21]
13/16"
[21]
SINGLE
1" HOLE [25.4]
1/4" DEEP [6.4] MIN.
THIS SIDE
(2) 5/16" [7.9]
THRU HOLES
2
8
6
5
7
1 - INSIDE LEVER ASSEMBLY
2 - OUTSIDE LEVER ASSEMBLY
3 - MOUNTING SCREW (DOUBLE)
4 - ROSE
5 - MOUNTING SCREW (SINGLE)
6 - FLAT WASHER
7 - CUP WASHER
8 - CAP
2
1
3
DOUBLE
1" HOLE [25.4]
1/4" DEEP [6.4] MIN.
BOTH SIDES
(2) 5/16" [7.9]
THRU HOLE
4
Fig 2