
The telephone has 3 one-touch and 10 two-touch memories. One-touch memories
are stored in M1, M2 & M3, two touch memories are stored using the telephone
Storing One-touch Memories
Lift the handset, press and release
(ignore anything you hear in the
Select a memory location M1, M2 or M3 by pressing the corresponding button.
Enter the telephone number to be stored (up to 21 digits).
Replace the handset. The number is now stored.
Dialling using One-touch Memories
Lift the handset and wait for a dialling tone.
Select a memory location by pressing the corresponding memory button (M1,
M2 or M3). The stored number will now be dialled.
Storing Two-touch Memories
Lift the handset, press and release
(ignore anything you hear in the
Select a memory location by pressing one of the keypad number buttons
Enter the telephone number to be stored (up to 21 digits).
Replace the handset. The number is now stored.
Dialling using Two-touch Memories
Lift the handset and wait for a dialling tone.
Select a memory location by pressing the relevant keypad number
stored number will now be dialled.
if you wish to insert a pause in a telephone number. The name or
number stored in memory can then be entered on the memo list if wished. If a stored number
changes, follow the procedures above entering the new number in the same location as the old one.