DRAGONFIRE 04-0820 User manual

DragonFire
DragonFire Racing
3191 N. Washington St. Suite 2
Chandler, AZ 85225
1 [phone]
WWW.DRAGONFIRERACING.COM
Push Button Plate
Part # 04-0820 Steering Wheel Push Button Plate Deep - Black
Part # 04-0821 Steering Wheel Push Button Plate Shallow - Black
Congratulations on your purchase of the DragonFire Steering Wheel Push button Plate. When it comes to driving off road, you want to keep
your hands on the wheel at all times. With the push button plate, you can use the push buttons for your accessories, while keeping your hands
on the wheel. Be sure to check out the full line of DragonFire Accessories for your vehicle at your local authorized dealer or online at
http://www.DragonFireRacing.com
Fits: Standard 6 Bolt Steering Wheel
Disclaimer
Off road activities can be hazardous and could lead to injury, dismemberment, paralysis and death. No warranty
of representation is made as to the products ability to protect the user from any injury or death. The user assumes
that risk. The acceptance and /or use of this merchandise purchased from DragonFire by the customer hereby
shall release DragonFire from any and all liability pertaining to the use of such merchandise.
• Read and understand these instructions before installing product
• Regularly inspect
• Do not use product if there are any signs of damage
P2
P3
Part & Hardware List
ITEM QTY Description STEP USED
P1 1 Push Button Plate 2
P2 6 M5 X 16 Flat head screw 4
P3 1 3 mm Allen Wrench 4
P1
P2
P3
P1
ShallowDeep

DragonFire
Step 1: Place vehicle on a at and level surface. Place gear selector in “Park” and remove keys from the ignition.
Step 2: Place the push button plate onto the steering hub and line up the 6 bolt holes (Figure A).
Step 3: Place steering wheel over the push button plate, also lining up with the 6 bolt holes (Figure B).
ProTip: Periodically check all hardware and re-tighten if needed.
For further assistance please contact us at customerservice@dragonreracing.com or 1-800-708-9803.
Step 4: Thread on the bolts, and tighten using the supplied allen wrench (Figure C).
This completes installation. Time to ride and enjoy!