DREAMS Bunkbed User manual

Bunkbed
Assembly Instructions
Need assistance?
Call: 0344 292 0000
Dimensions mm Length Width Height
Single 2039 1012 1500
Approximate time to
assemble this product
Retain these instructions
for future reference
2 x people recommended to
assemble this product
Do not discard any of the
packaging until you have
checked that you have all the
parts and the pack of fixings.
You will require a cross
head screwdriver
Helpful advise before you begin:
1. We suggest you spend a short time reading through this leaflet
and then follow the simple step by step instructions.
2. If you follow the instructions carefully the end result should be
worth the effort.
3. Do not discard any of the packaging until you have checked that
you have all the parts and the pack of
fittings.
4. Assemble this product on a carpet.
5. To ensure an easier assembly, we strongly advise that all fittings
are only finger tightened during initial assembly. Only upon
completion of the assembly should all fixing points be fully
tightened.
6. We recommend a periodic check on all fixing points to make
sure they remain fully tightened.
7. Keep glue and fittings out of children’s reach.
8. Do not use any other tools other than those recommended to
build this product.
9. Please do not use substitute parts. Use only additional or
replacement parts supplied by Dreams Ltd.
10. In the unlikely event that this product has missing or damaged
parts, please call 0344 292 0000 to obtain spares.
Page 1 of 11
IMPORTANT: Read these instructions
carefully before attempting to assemble.
Retain these instructions for future
reference.
IMPORTANT - READ CAREFULLY - RETAIN FOR FUTURE REFERENCE.

Page 2 of 11
Do not discard any of the
packaging until you have
checked that you have all the
parts and the pack of fixings.
7 x 50mm Screw
Fittings Checklist
Parts Checklist
Ø6.3 x 100mm Bolt
x 4
x 16
Ø19 x 90mm Wood Dowel
Ø6.3 x 40mm Bolt
4 x 40mm Screw
Check size of fixings against this guage (dimensions in mm)
1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 10 0 11 0
x 8
x 6
x 16
x 68
x 6
G
A
7 x 100mm Screw
x 6
C
B
EH
I
J
Ø6.3 x 30mm Bolt
Half Round NutØ10 x 40mm Wood Dowel
x 12
F
Upper Headboard (Left)
Upper Headboard (Right)
Lower Headboard x2pcs
Upper Front Side Rail
Upper Back Side Rail
Lower Front Side Rail
Lower Back Side Rail
Long Guardrail x2pcs
Short Guardrail x2pcs
Guardrail Support x2pcs
Ladder Side Rail (Left)
Ladder Side Rail (Right)
Ladder Step x4pcs
Complete Twin Slat x2sets
01
02
03
04
05
06
07
08
09
10
M4 Allen Key
x 1
D
01
02
03
03
04
05
06
07
08
08
09
09
10
10
11
12
13
13
13
13
14
14
11
12
14
13

Page 3 of 10
Bed Frame Assembly
1
x 4
Ø6.3 x 100mm Bolt x 4 Half Round Nut x 1 M4 Allen Key
D
AI
03
03
07
A
A
I
I
A
A
D
I
I
Loosely tighten the Bolts
90%

Page 4 of 11
Bed Frame Assembly
2
x 4
Ø6.3 x 100mm Bolt x 4 Half Round Nut
AI
A
A
A
A
I
I
I
I
03
03
07
06
A
A
I
I
Loosely tighten the Bolts
90%

02
04
4
A
A
A
A
I
I
A
A
x 4
Ø6.3 x 100mm Bolt x 4 Half Round Nut
AI
I
I
x 4
7 x 100mm Screw x 8
Ø10 x 40mm
Wood Dowel
F
C
3
Loosely tighten
the Screws and Bolts
90%
C
F
F
08
02
01
C
C
C
C
A
A
I
A
A
08
05
I
Bed Frame Assembly
x 4
Ø6.3 x 100mm Bolt x 4 Half Round Nut
AI
I
I
Page 5 of 11
01
Counterbore hole
Loosely tighten the Bolts
90%
F

Page 6 of 11
Bed Frame Assembly
5
x 4
Ø19 x 90mm
Wood Dowel
B
B
B
B
B
Counterbore hole
01
02
03
03
06
07
Bolt hole

Page 7 of 11
Bed Frame Assembly
6
7
x 8
x 4
7 x 50mm Screw
G
Ø6.3 x 40mm Bolt
E
E
11
12
13
13
13
13
G
G
G
G
G
G
G
G
E
E
E
E
Fully tighten the Screws
Loosely tighten the Bolts
90%

Page 8 of 11
Bed Frame Assembly
8
9
x 4
Ø10 x 40mm
Wood Dowel
F
x 2
7 x 100mm Screw
C
x 2
Ø6.3 x 40mm Bolt
E
F
F
C
E
09
09
Bolt hole
E
E
Loosely tighten the Bolts
90%

Page 9 of 11
Sprung Slat System Assembly
10
11
x 6
Ø6.3 x 30mm Bolt
H
H
10
10
14
14
Counterbore hole
Fully tighten all Bolts
and Screws at this step.

Page 10 of 11
Sprung Slat System Assembly
12
Important Note:
Before you use the unit, Please
choose the right mattress on it.
Underneath the mark is the safe
size you could choice.
Mattress size: 90cm x 190cm
Note:
• Do not stand on the bed before placing the mattress.
• Assemble on a smooth flat surface.
• Children can become trapped between the bed and
the wall.To avoid risk of serious injury the distance
between the top safety barrier and the wall shall not
exceed 75mm or shall be more than 230mm.
Upper bed of bunk bed is not suitable for children
under six year due to the risk of injury from falls.
• Children can strangle in items such as ropes, strings,
cords, harnesses and belts attached to or hung on a
bunk bed.
• Maximum mattress depth for top bunk is 175mm.
• This product complies with European Standard
BS EN 747-1:2012+A1:2015 & 747-2:2012 + A1:2015
Important Note:
Take care of your children.
young children may easy fall
from the upper bunk sticker.
•
x 68
x 30
4 x 40mm Screw
J
x 30
x 4
J
J
J
09
14
Tighten the Screws
with a Phillips screwdriver
(Not provided)
Check all the Bolts,
screws/ parts and make
sure all Fittings must be
tightened properly, securely
before use.
J
J
J
J
J
14