DREAMS Calvert Bedside User manual

Calvert Bedside
Assembly Instructions
1. We suggest you spend a short time reading through this leaflet and then follow
the simple step by step instructions.
2. If you follow the instructions carefully the end result should be worth the effort.
3. Do not discard any of the packaging until you have checked that you
have all the parts and the pack of fittings.
4. Assemble this product on a carpet.
5. To ensure an easier assembly, we strongly advise that all fittings are only
finger tightened during initial assembly. Only upon completion of the.
Assembly should all fixing points be fully tightened.
6. We recommend a periodic check on all fixing points to make sure they remain
fully tightened.
7. Keep glue and fittings out of children’s reach.
In the unlikely event that this product has missing or damaged parts, please call
0344 292 0000 to obtain spares
spare
Before you
Start, here
are some
helpful
advices.
Revision number 1/1 1

ASSEMBLY
Revision number 1/1 2
1. This item comes with a pre-fitted wall
attachment strap. We recommend the
use of the wall strap provided for safety
reasons. Attach the end of the wall
attachment strap to the wall once the
item has been placed into the required
position using an appropriate screw,
washer and wall plug for your wall type
WARNING: Ensure the area to be
drilled is free from hidden electrical
wires and water or gas pipes.
NOTE: Wall fixings are not included.
Source suitable fixings for your wall
type, if in doubt consult a qualified
tradesperson.