Important information
en
Safety instructions
DANGER
Risk of fatal electric shock!
> Do NOT remove individual shower toilet
components.
> If the supply cord on this unit is damaged, it
must be replaced by the manufacturer, the
service agent or similarly qualified persons
in order to avoid a hazard.
> Appliances have to be correctly earthed.
Mounting instructions
Please read pre-installation information
sheets prior to the installation. These are
available to download on the Internet at
www.duravit.cn.
An installation video of the complete shower
toilet is available at www.duravit.cn/mnt_
sewa_slim.
Simply use
this QR code
1
Checking the installation requirements
(Diagram 1)
The installation of the WC ceramics with
pre-installation of the shower toilet water
and power supplies is described in sepa-
rate instructions.
> Ensure that the supplies and WC ceram-
ics have been installed and mounted
according to the instructions and
regulations.
29
Testing
>Connect the power and water supply.
>Confirm that the product functions
properly according to the operating
instructions.
Mounting instructions information
These mounting instructions come as part of
the Duravit shower toilet and should be read
carefully prior to installation.
Explanation of the key words and symbols
DANGER Indicates a hazardous situation
which, if not avoided, will
result in death or serious
injury.
NOTICE Is used to address practices
not related to physical injury
Link to the mounting information in
this section
Target readership and qualifications
The shower toilet and associated water
connection should only be installed by qualified
plumbers. The electrical installation should
only be carried out by qualified electricians.
NOTICE Risk of product and/or
property damage!
> Observe the local installation regulations
and any country-specific standards at all
times.
NOTICE Risk of product damage due
to freezing water!
> Do not install the shower toilet in rooms at
risk of frost. The room temperature must
not be less than 4 °C.
NOTICE Risk of product damage due
to condensation!
> Leave the unit switched off for a few hours
if it has previously been moved from a cold
location to a warm location.
SensoWash Slim_MAL_CN_57003 5
