E-Pill Multi-Alarm TimeCap User manual

Instructions for e-pill®Multi-Alarm TimeCap
This easy to use e-pill Multi-Alarm TimeCap allows you to know when you last took your
medication, even without setting any alarms. The automatic LAST OPENED indicator always
shows the time and day of week when the TimeCap device was last put on the bottle.
Additionally you can set up to 24 daily alarms, on the hour. The e-pill Multi-Alarm TimeCap
has been shown to improve patient compliance/ medication adherence in a clinical study.
SET TIME & DAY OF WEEK
SET ALARMS
Remove the cap from the bottle.
Press the MODE button once and the
display will start to blink (a).
Use the DOWN or UP buttons to change
the time. Press and hold either button to
move faster (b).
When desired time is reached, press the
MODE button once and the weekday
indicator will start to blink (c).
Remove the cap from the bottle.
Press and hold the DOWN and UP
buttons at the same time until the display
blinks12 PM (a).
Use the DOWN or UP buttons to reach the
hour you wish an alarm to sound (b).
To set the alarm, press the CHECK button
and an alarm symbol will appear in the
upper left corner (c).
Use the DOWN or UP buttons to change
the day of the week (d).
When desired weekday is reached, either
press the MODE button once or wait 5
seconds to return to the time display (e).
(a) (b) (c) (d) (e)
www.epill.com Phone: [phone]
Repeat steps 3 & 4 to set more alarms.
detcelesehtotog,mralanaevomeroT
alarm hour and press the CHECK button,
and the alarm symbol will disapear.
Press and hold the DOWN and UP buttons
at the same time, or wait 5 seconds, to
store the settings and return to the time
display (d).
(c)(a) (d)
(b)
SKU 941457
In order to use the features LAST OPENED indicator and setting alarms, you need to set the time and the day of week.
1.
2.
3.
4.
5.
6.
5.
6.
7.
1.
2.
3.
4.

HOW TO USE YOUR E-PILL MULTI-ALARM TIMECAP MEDICATION REMINDER
DO NOT remove the cap from the bottle.
Press and hold the DOWN and UP buttons
at the same time until the display shows 12
PM (a).
Use the DOWN or UP buttons to advance
by one hour. The alarm symbol will appear
on the display at each hour an alarm is set
(b).
Wait 5 seconds for the display to return to
the last time you opened the bottle (c).
Let go of the CHECK button for the display to return to
the last time you opened the bottle (c)
e-pill, LLC | 49 Walnut Street, Bldg. 4
Wellesley, MA 02481, United States
International Phone: [phone]
www.epill.com Phone: [phone]
CHECK ALARM SETTINGS
CHECK CURRENT TIME
(a)
(b) (c)
Press and hold the CHECK button, and the
display will show the current time and day
(a b).
(b) (c)
(a) (c)(b)
NOTE: The display by default does not show the current time. To check the current time, follow these steps.
,your
e-pill Multi-Alarm TimeCap will start to beep and the
display will start to blink (a).
Remove the cap and take your medication.
DO NOT FORGET TO PUT THE CAP BACK ON.
The time and day of week of when you last put the cap
back on will automatically be recorded and displayed
on the cap (b).
If an alarm is over due, the display will stay blinking,
showing the last time the cap was opened, to remind
you of when you last took your medication. The
display will keep blinking until the bottle is opened
(c).
The display on your e-pill Multi-Alarm TimeCap will always record the time that the cap was last opened to remind you
of when you last took your medication, even if no alarms are set.
This e-pill Medication Reminder is only a supplement to any memory system that you currently use to remind yourself to take
medications. The user maintains full responsibility to administer medication at the appropriate times. e-pill, LLC assumes no
responsibility for any incidental or consequential damages, including but without limitation, damages or injuries resulting from
malfunction of the product. e-pill, LLC’s liability shall in no circumstances exceed the amounts paid by the user for the timer. Cap is
not child-proof.
DISCLAIMER
(a)
1.
2.
3.
4.
1.
1.
2.
3.
4.
2.
Version 120626