EasyStand Evolv User manual

Perfect Fit Guide
™
Proper positioning is needed to achieve optimum standing posture.
Before transfer ng nto the stander,
measure for approx mate (A) seat
depth and seat to (B) foot plate set-
t ngs
step one - measure
Evolv & Glider
step two - seat depth
step three - back angle
Use the above measurement (A) to
adjust the seat depth on the stander.
To adjust seat depth, loosen the knob
under the seat (C). Depress the snap
button on the adjustment tube wh le
mov ng the back (D). T ghten the knob
after adjust ng.
For the Evolv: Use measurement “A”
and measure from the front of the
seat to the back. Adjust the seat depth
unt l the proper measurement has
been reached.
For the Glider: Use measurement “A”
and measure from the center of the
kneepad to the back. Adjust the seat
depth unt l the proper measurement
has been reached.
(C) (D)
After ach ev ng your des red seat
depth, rotate the back angle (E) adjust-
ment knob so the (F) seat/back angle
nd cator s n the green area pr or to
stand ng.
Note: Repeat steps 2 and 3 for each
color adjustment.
(B)
(A)
over . . .
(F) (E)
444
www.easystand.com 800•342•8968
These adjustments are only to be made while the unit is in the seated position.

Perfect Fit Guide
Proper positioning is needed to achieve optimum standing posture.
www.easystand.com 800•342•8968
step si - kneepad
For the Evolv: Adjust the (K)
kneepad so t f ts comfortably up to
the knees.
For the Glider: Sl de nto kneepads
(L) and secure the calf straps beh nd
the knees.
step four - footplates
Use the above (B) measurement to
adjust the foot plate he ght. Loosen
the (G) ratchet handles on the foot
plates to adjust he ght and
plantar/dors . T ghten ratchet han-
dles after pos t on ng. The knees
should be sl ghtly lower than the h p
(H).
(G) (H)
(K) (L)
Printed in the USA. © 2011 Altimate Medical, Inc. FORM EVPFG 0811
Inspect your standing frame periodically to assure that it is in safe operating condition.
Caution: These adjustments are only to be made
wh le the un t s n the seated pos t on.
step five - Evolv positioning
If you have a Glider, skip to step six.
Pos t on the user’s h ps as close as
poss ble to (I) stander’s h p p vot. To
determ ne correct pos t on ng, only
two f ngers should f t between the
front of the seat and the back of the
knee (J).
(I) (J)
™
Evolv & Glider
!