edenox SCRR Service manual

Versión 1.1
Refrigerated self-service.
SCRR, SPFR, SCR, SPF
Installation, use and maintenance manual

Versión 1.2
Installation, use and maintenance manual
REFRIGERATED FURNITURE SELF-SERVICE
SCRR-12, SCRR-16, SPFR-12, SPFR-16, SCR-12, SCR-16, SPF-12, SPF-16
Warranty
It will be responsible only for manufacturing defects, being excluded the manipulation or incorrect use
of the material by the client or user. The warranty will be 1 year, only for defective manufacturing
components. The labor service and travel are always at the customer's expense. All liability for defects
attributable to transport is declined, provided that the maximum claim is not made 24 hours after
receiving the goods.
Description
Refrigerated self-service furniture has been designed for the presentation and preservation of food
and beverages.
Specifications
•Temperature control and defrost cycle performed by electronic digital read control.
•Ecological injected polyurethane insulation, free of CFC with a density of 40Kg. With this
insulation, lower losses and significant energy savings are achieved.
•Built entirely in 18/10 stainless steel.
SCRR-SPFR SCR-SPF
Frigorific power: 484w Frigorific power: 250w
Electric power: 358w Electric power: 200 w
230V 230V
Operation:
1. Before connecting the appliance to the socket, check that the voltage and the frequency of the
mains match the nameplate of the appliance. It is essential that the electrical installation where
the device is to be connected has a ground connection, as well as the proper protection of the
thermal and differential magnet.
2. It is very important not to plug the air intakes, both the indoor fan and the refrigeration
equipment.
3. Connect to the electrical network.
4. Turn on by the general switch.
5. It is necessary that the device works until reaching the working temperature before proceeding
to load the genre.
6. Do not introduce hot foods or containers.
7. Do not use for corrosive chemicals or medications.
8. The performance may suffer some variations depending on the number of openings and the
duration of them.

Versión 1.3
Maintenance
1. Before carrying out any cleaning or maintenance operations, disconnect the appliance from the
socket and turn the main switch to the off position.
2. The first cleaning must be done when unpacking the appliance and before connecting it.
3. Cleaning should be done with water and neutral detergent.
4. The cleaning of the outside of the cabinet, which we recommend to be carried out daily, must be
done with a damp cloth and following the direction of grinding of the steel.
5. Do not use elements that can produce incisions or deposit rust on the surface of the furniture.
6. Never use abrasive or chlorine-containing substances.
7. Rinse with clean water, avoiding jets, as they can reach the electrical parts and impair its proper
functioning.
8. Once clean and dry, introduce the accessories in the appropriate places, according to preferences.
9. For any operation to be carried out in the refrigeration unit (qualified personnel):
10.Disconnect the mains voltage.
11. Protect your hands, since some elements support a high temperature that can cause burns.
Electrical diagram SCR-SPF
230 V
50 Hz
L
COMPRESOR
COMPRESSOR
TIERRA
GROUND
L COMPRES.
VENTILADORCON.
FAN
220V
TERMOSTATO
THERMOSTAT
AMB. T
INTERRUP.
SWITCH
12122637_V00
LEYENDA /LEGEND:
-
G: GROUND/TIERRA (GREEN/VERDE)
-A: NEUTRAL/NEUTRO (BLUE/AZUL)
-M: LINE / LINEA (BROWN /MARRON)
SCR-SPF

Relés
Electrical diagram SCRR
TERMOSTATO
Relés
Neutro
Fase
Sonda
Neutro
Fase
Sonda
Fase
Resis des.
Ventilador
Compresor
Sonda
Fase
Resis des.
Ventilador
Compresor
SPFR electrical diagram
TERMOSTATO
A
limentación
Alimentación
Versión 1.1
4