Edsyn 971-230 LONER User manual

971-230
LONER®
Temperature Controlled
Soldering Station
• COMPLIES WITH MIL-S-45743E, MIL-STD-2000-1B, WS6536E AND
ESD SPEC, DOD-STD-1686, DOD-HDBK-263
made
in
U S A
Instruction manual

Specications for Model 971-230
Power Requirements 230V, 50/60 Hz
Power Rating 15W - 220W
Heater Rating 230V, 95W
Temperature Range 400°F-800°F/205°C-427°C
Temperature Regulation ±6°F/±3°C
Tip-to-Ground Voltage
Leakage/Resistance < 2mV/< 2 ohms
Overall Dimension 4.1"W x 8.2"H x 10"D
104 mm x 208 mm x 254 mm
Weight 2.5 lbs/1.1 kg
Contents
971-230 includes 1 - LT375 Soldering Tip
PD528 Tool Pod
SH230 Sponge Holder
(Includes RS199 Cleaning Sponge,
RS243 Leveling Pad, LN230 Liner)
WP556 WIGAPRY Low Static Computer Aid
DISTINGUISHING FEATURES
For 971-230 For 971-230P
POWER CORD WIRING
BROWN to LINE
BLUE to NEUTRAL
GRN/YEL to GROUND
For 971-230B
13A Fuse inside
For 971-230I
Power Cord

WARNING:
DO NOT HIT OR TAP THE SOLDERING TOOL. THE HEATER ELEMENT WILL BREAK!!!
CAUTION:
Over-lling can cause thermal shock
to the tip or heating element during
tip cleaning.
• Replace RS199 Cleaning Sponge
1. Fill water only up to the top of the RS243
Leveling Pad.
2. Depress RS199 to moisten it completely.
• Replace SC581 Solder Collector
1. Hold the Housing rm and turn Cap
counter-clockwise and pull it away from the
Housing.
2. Remove used SC581 and replace with
a new one.
3. Reassemble Pod with TOP of the Cap in
proper position.
MAINTENANCE
Static Safe
Temp.
Regulation
Indicator
SH230
Sponge Holder
PD528 Tool
Pod
Power Switch
Calibration Pots for HI & LO Temp. Hollow Threadless Heater
LN230
SH230-1
RS243
RS199
SC581
Solder Col-
lector
SR043
Front Hous-
ing
SR042
Thermal
Housing

Changing Tip
1. IMPORTANT: Make sure your tool is cool.
2. Turn Retaining Sleeve counter-clockwise to remove.
3. Remove old Soldering Tip.
4. Insert new Tip.
5. Install Retaining Sleeve. (should be “finger” tight only)
WARNING: Do not use the soldering tool if soldering tip is loose. This will cause the heater element to break.
LT375 LONER Spade Soldering Tip .06”
(1.5mm)
.48”
(12.2mm)
LT376 LONER Spade Soldering Tip .12”
(3.0mm)
.48”
(12.2mm)
LT374 LONER Conical Soldering Tip .03”
(0.8mm)
.48”
(12.2mm)
LT382 LONER Conical Soldering Tip .02”
(0.5mm)
.62”
(15.8mm)
XP371 LONER Extra Performance Spade Soldering Tip .03”
(0.8mm)
.60”
(15.2mm)
XP375 LONER Extra Performance Spade Soldering Tip
High Temperature Rated for Lead Free Process
.06”
(1.5mm)
.60”
(15.2mm)
XP376 LONER Extra Performance Spade Soldering Tip
High Temperature Rated for Lead Free Process
.12”
(3.0mm)
.60”
(15.2mm)
XP374 LONER Extra Performance Conical Soldering Tip
.03”
(0.8mm)
.60”
(15.2mm)
XP429 LONER Extra Performance Conical Soldering Tip .02”
(0.5mm)
.77”
(19.3mm)
Soldering Tips
Iron Plated for long life-Nickel and Chrome Plated for optimum heat transfer
Contact Edsyn for more tip selections
Length B
Set-Up Required for Spade, Conical, and Extra Performance Tips
OPTIONAL:
Apply AN112 Anti-Seize Compound or
AN122 High Heat Anti-Seize Syringe Dispenser
to Heater and area of Tip contact.
SR574 High Performance
Hollow Heater
Spade Tip
Conical Tip
More Tips are available at our website (www.edsyn.com) or in our General Line Catalog.
Width A

6
912
7
7
1B 1C
3
11
21
15
18
25
14
19
22A
2C
2B
2A
1A
22D 22
24
16
23
22K 22B
22H
22G
22F
22E
10
1
2
4
2D
9
971-230 LONER® SOLDERING STATION
SPARE PARTS LIST
5
17
20
13
23
22C