Emerson Anderson Greenwood M4TL User manual

ANDERSON GREENWOOD M4TL LIQUID LEVEL MANIFOLDS
FEATURES
• Cost savings of 20-30% when manifolding
instruments by eliminating several parts used
in conventional methods of ‘piping up’.
• Compact design requires minimum space for
operation and installation.
• Free-swivelling ball end stems ensure
bubble-tight valve closure without seat
galling.
• Easy instrument removal due to direct bolting
to the manifold. Signal lines, purge lines,
etc. are left undisturbed, facilitating repairs,
service and calibration.
• Immediate installation with AGCO Mount as
the manifold, steam block, bracket and all
associated piping can be installed without the
instrument at the time of plant construction.
• Secure mounting ensured by the AGCO
Mount. Instrument piping stability is
enhanced when supported directly by the pipe
stand through the manifold.
• All packing is below stem threads,
body-to-bonnet seal is below the threads
minimizing process fluid corrosion.
• Reduced chance of instrument damage.
With the AGCO Mount, the instrument can be
warehoused safely until final ‘loop’ checkout.
VCTDS-01139-EN 16/02
A single-flanged, two-valve manifold consisting of two block valves with no
equalizer passage suitable for pressures up to 6000 psig (414 barg)
GENERAL APPLICATION
The manifold is designed for direct mounting to
P-style differential pressure transmitters in
liquid level service on pressurized vessels.
TECHNICAL DATA
Materials: CS, SS, Hastelloy
Seats: Metal or soft
Connections: ½” NPT
Pressure (max.): 6000 psig (414 barg)
Temperature (max.): 1000°F (538°C)
www.valves.emerson.com © 2017 Emerson. All rights reserved.

2
2.41
[61.2]
2.38[60.5]
1.70
[43.2]
3.40 [86.4]
2.12
[53.8]
0.81 [20.6]
1.62
[41.1]
3.70
[94.0]
0.94 [23.9]
ANDERSON GREENWOOD M4TL LIQUID LEVEL MANIFOLDS
STANDARD MATERIALS
Valve Packing Body Bonnet Stem Ball Bolts
CS[2] PTFE A576 10L18 A108 A581-303 17-4 PH A193-B7
CS[2] GRAFOIL®/A576 10L18 A105 A581-303 17-4 PH A193-B7
Low emissions graphite
SS PTFE A479-316 A479- 316 A276-316 316 A193-B7
SS GRAFOIL®/A479-316 A479- 316 A276-316 316 A193-B7
Low emissions graphite
SG[3] PTFE A479-316 Monel®400 Monel®K500 A193-B7 PTFE
SG[3] GRAFOIL®/A479-316 A479-316 Monel®400 Monel®K500 A193-B7
Low emissions graphite
SG3[4] PTFE Hastelloy®C-276 Hastelloy®C-276 Hastelloy®C-276 Elgiloy®A193-B7
METAL SEAT (SOFT SEAT AVAILABLE) DIMENSIONS, INCHES (mm)
NOTES
1. Approximate valve weight: 5.0lb (2.3kg).
Metal seat: 0.156-inch (4.0mm) diameter orifice.
Valve Cv0.36 maximum.
Soft seat: 0.187-inch (4.8mm) diameter orifice.
Valve Cv0.83 maximum.
2. CS is zinc chromate plated to prevent corrosion.
3. SG (Sour Gas) meets the requirements of NACE MR0175/ISO 15156 (for chloride conditions ≤ 50 mg/l (ppm)) and NACE MR0103-2005.
4. SG3 (Sour Gas) meets the requirements of NACE MR0175/ISO 15156 (for chloride conditions > 50 mg/l (ppm)).
5. 316 SS bolts lower pressure ratings to a maximum of 4500 psig (310 barg). Consult factory for full ratings.
DIMENSIONS, INCHES (mm)
Packing A
PTFE 8.60
(218.4)
GRAFOIL®9.90
(251.5)
Instrument
Process
Block/
isolate
Block/
isolate
Instrument side
A Max. open
Ø 0.38 (9.6)
Mounting holes
2 places
½ - 14 NPT
process connection
2 places

3
6000
[414]
5000
[345]
4000
[276]
3000
[207]
2000
[138]
1000
[69]
0
0
[-18]
100
[38]
200
[93]
300
[149]
400
[204]
500
[260]
600
[316]
700
[371]
800
[427]
900
[482]
1000
[538]
1500
[103]
ANDERSON GREENWOOD M4TL LIQUID LEVEL MANIFOLDS
PRESSURE VS. TEMPERATURE
PRESSURE AND TEMPERATURE RATINGS
Valve Packing Ratings
CS[1] PTFE 6000psig at 200°F (414barg at 93°C)
4000psig at 500°F (276barg at 260°C)
CS[1] GRAFOIL®/6000psig at 200°F (414barg at 93°C)
Low emissions graphite 4000psig at 600°F (276barg at 316°C)
SS PTFE 6000psig at 200°F (414barg at 93°C)
4000psig at 500°F (276barg at 260°C)
SS GRAFOIL®/6000psig at 200°F (414barg at 93°C)
Low emissions graphite 1500psig at 1000°F (103barg at 538°C)
SG[2], SG3[3] PTFE 6000psig at 200°F (414barg at 93°C)
4000psig at 500°F (276barg at 260°C)
SG[2]), SG3[3] GRAFOIL®/6000psig at 200°F (414barg at 93°C)
Low emissions graphite 1500psig at 1000°F (103barg at 538°C)
NOTES
1. CS is zinc chromate plated to prevent corrosion.
2. SG (Sour Gas) meets the requirements of NACE MR0175/ISO 15156 (for chloride conditions ≤ 50 mg/l (ppm))
and NACE MR0103-2005.
3.
SG3 (Sour Gas) meets the requirements of NACE MR0175/ISO 15156 (for chloride conditions > 50 mg/l (ppm)).
4. 316 SS bolts lower pressure ratings to a maximum of 4500 psig (310 barg). Consult factory for full ratings.
5. Minimum temperature: -70°F (-57°C).
M4TLHIS-4
M4TLEIS-4
M4TLHIC-4
M4TLEIC-4
M4TLVIC-4
M4TLVIS-4
Denotes
intersecting
data
Temperature °F (°C)
Pressure psig (barg)
BONNET ASSEMBLY OPTIONS
The 4TL has metal seats as standard with the
option of soft seated designs.
All stem threads are rolled and lubricated to
prevent galling and reduce operating torque.
The stem seal is a patented PTFE packing
gland which is adjustable in service. All bonnets
are assembled with a bonnet locking pin to
prevent accidental removal while in service
and a protective dust cap is fitted to contain
stem lubricant and prevent the influx of
contaminants.
Metal-seated bonnet assemblies
The metal-seated bonnet assemblies have a
rotating stem with free swivel ball-type seat for
long service life. The specially hardened ball
seat is ideal for both gas and liquid service.
Soft-seated bonnet assemblies
The soft-seated bonnet assemblies have a
one-piece rotating stem and plug. In addition to
the adjustable PTFE packing gland, the bonnets
are available with a FKM O-ring and PTFE
back-up ring.

4
4.5
[114.0]
5.0
[126.0]
3.0
[76.0]
ANDERSON GREENWOOD M4TL LIQUID LEVEL MANIFOLDS
AGCO MOUNT KITS
AGCO MOUNT KITS FOR LIQUID LEVEL MANIFOLD
Manifold style Description Material
M4TL Standard kit CS, zinc chromate plated
For bottom test ports
With steam block
M4TL Standard kit SS
For bottom test ports
With CS steam block
AGCO Mount kits are available for all manifolds
where they apply. See AM option for each
manifold.
Flow

5
ANDERSON GREENWOOD M4TL LIQUID LEVEL MANIFOLDS
SELECTION GUIDE
Example: M4TL V I C - 4 - AM
Packing
VPTFE
HGrafoil®
Seat material
IIntegral (body material)
Body material
CCS, A576-10L18
SSS, A479-31
W 316L SS
J Hastelloy®
Connections
4Flange outlet x ½-inch FNPT (inlet)
Connection style
B Female socket weld
Options
AM AGCO mount
AMMS AGCO mount kit -multi mount-stainless
AMV AGCO mount kit (vertical)
AMVS AGCO mount kit (vertical stainless steel)
AMW AGCO mount kit (wall mounting)
BL Bonnet lock device
CL00 Chlorine cleaning (CL)
HD Hydrostatic testing (100%) (MSS-SP-61)
OC00 Oxygen clean (OC)
PMI00 PMI body only
PT Top purge port ¼"
R3V Add for use with Rosemount model 305C (SS 18-8 Bolts)
SB Steam block
SG (Sour Gas) NACE edition 2003 /MR0103
SG3 (Sour Gas) NACE MR0175/ISO 15156-3 (latest edition)
SS All 316 SS construction
SSB 316 SS flange bolt (B8M Class 2) - will provide full pressure rating
SSC 316 flange bolt (B8M) - maximum pressure rating 4500 psi [310 barg]
SSD 696 material bolt
TLarge diameter gasket groove
TB Bottom test port ¼"
TF Top test ports ¼" FNPT
XP ASME B31.1 (with Grafoil bonnets only)
OR O-ring gasket
NOTE
1. 316 SS bolts lower pressure ratings to a maximum of 4500 psig (310 barg). Consult factory for full ratings.

6
© 2017 Emerson. All rights reserved.