Emerson Rosemount 5300 Series Operational manual

Product Data Sheet
00813-0100-4530, Rev DA
December 2010 Rosemount 5300 Series
www.rosemount.com
• Industry leading measurement capability and
reliability provided by direct switch technology
• Increased plant availability with advanced
diagnostics and PlantWeb®functionality
• Increased safety and proven FMEDA suitable
for SIL2 with a SFF>90%
• Reduced cost and increased safety from the
robust modular design
• Reduced instrument count and process
penetrations with a MultiVariable™ transmitter
• Improved throughput and product quality due
to superior performance and accuracy
• Reduced startup cost through powerful and
easy-to-use configuration tools and seamless
plant integration
• Improved EMC performance and higher
safety with smart galvanic interface
• Reduced operating costs with predictive
maintenance and easy troubleshooting
Contents
Taking Guided Wave Radar Benefits to the Next Level . . . . . . . . . . . . . . . . . . . . . . page 2
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16
Functional Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16
Performance Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 28
Physical Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 31
Product Certifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 36
Dimensional Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 39
Superior Performance Guided Wave Radar
Level and Interface Transmitter
A.P.O. - ELMOS v.o.s., Pražská 90, 509 01 Nová Paka, Tel.: [phone], Fax: [phone], E-mail: [email protected], Internet: www.apoelmos.cz

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
Rosemount 5300 Series
2
Taking Guided Wave Radar Benefits to the Next Level
MEASUREMENT PRINCIPLE
Low power, nano-second microwave pulses are guided down a
probe submerged in the process media. When a microwave pulse
reaches a media with a different dielectric constant, part of the
energy is reflected back to the transmitter.
The transmitter uses the residual wave of the first reflection for
measuring the interface level. Part of the wave, which was not
reflected at the upper product surface, continues until it is reflected at
the lower product surface. The speed of this wave depends fully on
the dielectric constant of the upper product.
The time difference between the transmitted and the reflected pulse
is converted into a distance, and the total level or interface level is
then calculated. The reflection intensity depends on the dielectric
constant of the product. The higher the dielectric constant value, the
stronger the reflection is.
GUIDED WAVE RADAR TECHNOLOGY BENEFITS
• Highly accurate and reliable direct level measurement with no
compensation needed for changing process conditions (such as
density, conductivity, viscosity, pH, temperature, and pressure)
• No moving parts and no re-calibration result in minimized
maintenance
• Handles vapor, dust, turbulence, and foam well
• Suitable for small tanks, difficult tank geometry, internal obstacles,
and unaffected by the mechanical design of chambers
• Top down installation minimizes risk for leakages
SPECIAL 5300 FEATURES
Optimized to Suit More Applications
• Suitable for most liquid and solids level applications and liquid
interface applications
• Innovations to handle even the most challenging applications
reliably, including process vessels, control, and safety
• A wide selection of materials, process connections, probe styles,
and accessories
• A wide range of options to find the best fit in existing chambers, or a
complete assembly with Rosemount 9901 high quality chambers
• The Dynamic Vapor Compensation (DVC) option automatically
compensates for changes in the vapor space dielectric
Signal curve after Dynamic
Vapor Compensation
Signal curve before Dynamic
Vapor Compensation
Reference
pulse
Level
Interface level
High application flexibility
Accuracy in saturated steam
From this... to this... in minutes
Displacer
Guided wave radar

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
3
Rosemount 5300 Series
Best Performance and Uptime
• Unique Direct Switch Technology (DST) and Probe End
Projection (PEP) improve measurement capability and reliability
• Ability to use single lead probe for long measuring ranges,
obstructions and low dielectrics ensures reliability in more
applications, such as viscous media
• PEP provides a backup function for challenging applications such
as plastic pellets and boiling hydrocarbons
• Smart Galvanic Interface results in a more stable microwave and
EMI performance with minimized effects from outside disturbances
Robust Design Reduces Costs and Increases Safety
• Heavy-duty unique probe solution for extreme temperature and
pressures with a multiple layer of protection
• EchoLogics and smart software functions provide enhanced ability
to keep track of the surface and detect a full vessel situation
• Third party approved for overfill protection and Safety Integrated
System SIL2 suitability
• Electronics and cable connections in separate compartments
provides safer handling and improved moisture protection
Easy Installation and Plant Integration
• Easy upgrade by matching existing tank connections and
cut-to-fit probes
• MultiVariable™ device reduces the number of process
penetrations
• Seamless system integration with HART
®
, F OUNDATION ™ fieldbus,
Modbus, or IEC 62591 (WirelessHART) with the Smart Wireless
THUM™ adapter
• Pre-configuredor easy configuration inRosemount Radar Master
with a five-step wizard, auto connect, and online help
• Enhanced DD with step-by-step configuration and echo curve
capability (HART) in tools such as AMS Device Manager, and
Field Communicator
• DTM with echo curve capability for use in FDT/DTM compatible
configuration tools such as PACTWare™, Yokogawa®
FieldMate/PRM
Minimized Maintenance Reduces Cost
• Easy online troubleshooting with user friendly software, utilizing
powerful echo curve and logging tools
• Signal Quality Metrics (SQM) diagnostics to detect product
build-up on probe or to monitor turbulence, boiling, foam, and
emulsions
• Predictive maintenance with advanced diagnostics and
PlantWeb alerts
• Modular design for reduced spare parts and easy replacement of
the head without opening the tank
Signal strength
Distance
With Direct Switch
Technology
Without Direct Switch
Technology
DST provides a signal that is two to
five times stronger than other GWR
transmitters’
With PEP, the
surface
position is
calculated if the
surface echo
becomes
unavailable
Secondary gas
tight seal
decoupled from
the process
Flexible probe
load and
locking system
Dual ceramic
temperature
and pressure
seal
Robust modular design
Rosemount Radar Master enables
easy configuration and service with
wizard, online help, echo curve and
logging tools, and much more

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
Rosemount 5300 Series
4
Rosemount 5301 and 5302
Level and/or Interface in Liquids
Rosemount 5301 and 5302 Guided Wave Radar Level transmitters provide industry
leading measurement capabilities and reliability in liquids. Characteristics include:
• Direct Switch Technology and Probe End Projection to handle low reflective media
and long measuring ranges
• Wide range of probe styles, materials, and temperatures and pressures for
application flexibility
• HART 4-20 mA, FOUNDATION fieldbus
, Modbus , or IEC 62591 (WirelessHART) with
the Smart Wireless THUM adapter
• Prior use SIL 2 suitable (QS Option)
• Advanced Diagnostics (D01 & DA1 Options)
Additional Information
Specifications: page 16
Certifications: page 36
Dimensional drawings: page 39
TABLE 1. 5301 and 5302 Level and/or Interface in Liquids Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
Model Product Description
5301 Guided Wave Radar Liquid Level or Interface Transmitter (interface available for fully submerged probe)
5302 Guided Wave Radar Liquid Level and Interface Transmitter
Signal Output
Standard Standard
H 4-20 mA with HART communication ★
FF
OUNDATION fieldbus ★
M RS-485 with Modbus communication ★
Housing Material
Standard Standard
A Polyurethane-covered Aluminum ★
Expanded
S Stainless Steel, Grade CF8M (ASTM A743)
Conduit / Cable Threads
Standard Standard
1 ½ - 14 NPT ★
2 M20 x 1.5 adapter ★
E M12, 4-pin, Male connector (eurofast®)(1) ★
M A size Mini, 4-pin, Male connector (minifast®)(1) ★
Operating Temperature and Pressure(2) Probe Type
Standard Standard
S - 15 psig (-1bar) to 580 psig (40 bar) @ 302 °F (150 °C) All ★
H High Temperature / High Pressure(3):
2940 psi @ 752 °F and 5000 psi @ 100 °F (203 bar @ 400 °C and 345 bar @ 38 °C) 3A, 3B, 4A, 4U, 4V, 5A and 5B
★
Ordering Information

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
5
Rosemount 5300 Series
P High Pressure(3):
Max 392 °F (200 °C): 3500 psi @ 392 °F and 5000 psi @ 100 °F (243 bar @ 200 °C
and 345 bar @ 38 °C)
3B, 4A, 5A, and 5B ★
Expanded
CCryogenic Temperature(3) (4)-321 °F (-196 °C)
Max 392 °F (200 °C): 3500 psi @ 392 °F and 5000 psi @ 100 °F (243 bar
@ 200 °C and 345 bar @ 38 °C)
3A, 3B, 4A, 5A, 5B (Only
SST)
Material of Construction(5): Process Connection /
Probe Probe Type Valid Operation Temperature and Pressure
Standard Standard
1 316L SST (EN 1.4404) All S, H, P, C ★
Expanded
2 Alloy C-276 (UNS N10276). With plate
design if flanged version. Up to class 600,
PN 63 for HTHP/HP probes.
3A, 3B, 4A S, H, P
3 Alloy 400 (UNS N04400). With plate
design if flanged version. 3A, 3B, 4A, 5A, 5B S
7 PTFE covered probe and flange. With
plate design. 4A and 5A S
8 PTFE covered probe 4A and 5A S
H Alloy C-276 (UNS N10276) process
connection, flange, and probe(6) 3A, 3B, 4A H, P
Sealing, O-ring Material (Consult the factory for other o-ring materials)
Standard Standard
N None(7) ★
VViton
®fluoroelastomer ★
E Ethylene Propylene ★
KKalrez
®6375 perfluoroelastomer ★
B Buna-N ★
Probe Type Process Connection Probe Lengths
Standard Standard
3B Coaxial, perforated.For level andinterface
measurement, or easier cleaning. Flange / 1 in.(12), 1.5 in., 2 in.(12) Thread Min: 1 ft 4 in. (0.4 m). Max:
19 ft 8 in. (6 m)
★
4A Rigid Single Lead (8 mm) Flange / 1 in.(12), 1.5 in., 2 in.(12) Thread
/ Tri-Clamp Min: 1 ft 4 in. (0.4 m). Max: 9 ft 10 in. (3 m)
★
4B Rigid Single Lead (13 mm)(8) Flange / 1 in., 1.5 in., 2 in. Thread /
Tri-Clamp Min: 1 ft 4 in. (0.4 m). Max: 14 ft 9 in.
(4.5 m)
★
5A Flexible Single Lead with weight(9) Flange / 1 in.(12), 1.5 in., 2 in.(12) Thread
/ Tri-Clamp Min: 3 ft 4 in. (1 m). Max: 164 ft (50 m)
★
5B Flexible Single Lead with chuck(10) Flange / 1 in.(12), 1.5 in., 2 in.(12) Thread
/ Tri-Clamp Min: 3 ft 4 in. (1 m). Max: 164 ft (50 m)
★
Expanded
1A Rigid Twin Lead(12) Flange / 1.5 in., 2 in.(12) Thread Min: 1 ft 4 in. (0.4 m). Max: 9
ft 10 in. (3 m)
2A Flexible Twin Lead with weight (12) Flange / 1.5 in., 2 in.(12) Thread Min: 3 ft 4 in. (1 m). Max: 164
ft (50 m)
3A Coaxial (for level measurement)(11) Flange / 1 in.(12), 1.5 in., 2 in.(12) Thread Min: 1 ft 4 in. (0.4 m). Max:
19 ft 8 in. (6 m)
4U Dynamic Vapor Compensation
Single Rigid Probe for 2 in. pipes(13) Flange / 1.5 in. Thread Min: 2 ft 5 in. (0.76 m). Max:
13 ft (4 m)
TABLE 1. 5301 and 5302 Level and/or Interface in Liquids Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
Rosemount 5300 Series
6
4V Dynamic Vapor Compensation
Single Rigid Probe for 3-4 in. pipes(13) Flange / 1.5 in. Thread Min: 2 ft 5 in. (0.76 m). Max:
13 ft (4 m)
Probe Length Units
Standard Standard
E English (feet, in.) ★
M Metric (meters, centimeters) ★
Total Probe Length (14) (feet/m)
Standard Standard
xxx 0-164 ft or 0-50 m ★
Total Probe Length (14) (in./cm)
Standard Standard
xx 0-11 in. or 0-99 cm ★
Process Connection - Size / Type (consult the factory for other process connections)
ASME / ANSI Flanges(15) (16)
Standard Standard
AA 2 in., 150 lb ★
AB 2 in., 300 lb ★
AC 2 in., 600 lb. HTHP / HP units ★
AD 2 in., 900 lb. HTHP / HP units ★
BA 3 in., 150 lb ★
BB 3 in., 300 lb ★
BC 3 in., 600 lb. HTHP / HP units ★
BD 3 in., 900 lb. HTHP / HP units ★
CA 4 in., 150 lb ★
CB 4 in., 300 lb ★
CC 4 in., 600 lb. HTHP / HP units ★
CD 4 in., 900 lb. HTHP / HP units ★
Expanded
AE 2 in., 1500 lb. HTHP / HP units
AI 2 in., 600 lb, RTJ (Ring Type Joint). HTHP / HP units
AJ 2 in., 900 lb, RTJ (Ring Type Joint). HTHP / HP units
AK 2 in., 1500 lb, RTJ (Ring Type Joint). HTHP / HP units
BE 3 in., 1500 lb. HTHP / HP units
BI 3 in., 600 lb, RTJ (Ring Type Joint). HTHP / HP units
BJ 3 in., 900 lb, RTJ (Ring Type Joint). HTHP / HP units
BK 3 in., 1500 lb, RTJ (Ring Type Joint). HTHP / HP units
CE 4 in., 1500 lb. HTHP / HP units
CI 4 in., 600 lb, RTJ (Ring Type Joint). HTHP / HP units
CJ 4 in., 900 lb, RTJ (Ring Type Joint). HTHP / HP units
CK 4 in., 1500 lb, RTJ (Ring Type Joint). HTHP / HP units
DA 6 in., 150 lb
EN (DIN) Flanges(17) (18)
Standard
HB DN50, PN40 ★
HC DN50, PN63. HTHP / HP units ★
HD DN50, PN100. HTHP / HP units ★
IA DN80, PN16 ★
TABLE 1. 5301 and 5302 Level and/or Interface in Liquids Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
7
Rosemount 5300 Series
IB DN80, PN40 ★
IC DN80, PN63. HTHP / HP units ★
ID DN80, PN100. HTHP / HP units ★
JA DN100, PN16 ★
JB DN100, PN40 ★
JC DN100, PN63. HTHP / HP units ★
JD DN100, PN100. HTHP / HP units ★
Expanded
HE DN50, PN160. HTHP / HP units
HF DN50, PN250. HTHP / HP units
IE DN80, PN160. HTHP / HP units
IF DN80, PN250. HTHP / HP units
JE DN100, PN160. HTHP / HP units
JF DN100, PN250. HTHP / HP units
KA DN150, PN16
JIS Flanges(17) (19)
Standard Standard
UA 50A, 10K ★
VA 80A, 10K ★
XA 100A, 10K ★
Expanded
UB 50A, 20K
VB 80A, 20K
XB 100A, 20K
YA 150A, 10K
YB 150A, 20K
ZA 200A, 10K
ZB 200A, 20K
Threaded Connections(15) Probe Type
Standard Standard
RA 1 ½ in. NPT thread All ★
RC 2 in. NPT thread All, standard temperature
and pressure
★
Expanded
RB 1 in. NPT thread 3A, 3B, 4A, 4B, 5A, 5B,
standard temperature and
pressure
SA 1 ½ in. BSP (G 1 ½ in.) thread All
SB 1 in. BSP (G 1 in.) thread 3A, 3B, 4A, 4B, 5A, 5B,
standard temperature and
pressure
Tri-Clamp Fittings(15) Probe Type
Expanded
FT 1 ½ in. Tri-Clamp 4A, 5A, 5B standard
temperature and pressure
AT 2 in. Tri-Clamp 4A, 4B, 5A, 5B standard
temperature and pressure
BT 3 in. Tri-Clamp 4A, 4B, 5A, 5B standard
temperature and pressure
TABLE 1. 5301 and 5302 Level and/or Interface in Liquids Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
Rosemount 5300 Series
8
CT 4 in. Tri-Clamp 4A, 4B, 5A, 5B standard
temperature and pressure
Proprietary Flanges
Standard Standard
TF Fisher - proprietary 316L SST (for 249B chambers) Torque Tube Flange ★
TT Fisher - proprietary 316L SST (for 249C chambers) Torque Tube Flange ★
TM Masoneilan - proprietary 316L SST Torque Tube Flange ★
Hazardous Locations Certifications
Standard Standard
NA No Hazardous Locations Certifications ★
E1 ATEX Flameproof(20) ★
E3 NEPSI Flameproof(20) ★
E5 FM Explosion-proof(20) ★
E6 CSA Explosion-proof(20) ★
E7 IECEx Flameproof(20) ★
I1 ATEX Intrinsic Safety ★
IA ATEX FISCO Intrinsic Safety(21) ★
I3 NEPSI Intrinsic Safety ★
IC NEPSI FISCO Intrinsic Safety(21) ★
I5 FM Intrinsic Safety and Non-Incendive ★
IE FM FISCO Intrinsic Safety(21) ★
I6 CSA Intrinsic Safety ★
IF CSA FISCO Intrinsic Safety(21) ★
I7 IECEx Intrinsic Safety ★
IG IECEx FISCO Intrinsic Safety(21) ★
Expanded
E2 INMETRO Flameproof
I2 INMETRO Intrinsic Safety
IB INMETRO FISCO Intrinsic Safety
E4 TIIS Flameproof
KA ATEX, FM, CSA Flameproof/Explosion-proof(20)
KB ATEX, FM, IECEx Flameproof/Explosion-proof(20)
KC ATEX, CSA, IECEx Flameproof/Explosion-proof(20)
KD FM, CSA, IECEx Flameproof/Explosion-proof(20)
KE ATEX, FM, CSA Intrinsic Safety
KF ATEX, FM, IECEx Intrinsic Safety
KG ATEX, CSA, IECEx Intrinsic Safety
KH FM, CSA, IECEx Intrinsic Safety
KI FISCO - ATEX, FM, CSA Intrinsic Safety(21)
KJ FISCO - ATEX, FM, IECEX Intrinsic Safety(21)
KK FISCO - ATEX, CSA, IECEX Intrinsic Safety(21)
KL FISCO - FM, CSA, IECEX Intrinsic Safety(21)
Options
Standard Standard
M1 Integral digital display ★
P1 Hydrostatic testing(22) ★
N2 NACE material recommendation per MR-0175 and MR-0103(23) ★
TABLE 1. 5301 and 5302 Level and/or Interface in Liquids Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
9
Rosemount 5300 Series
LS Long stud(24) 9.8 in (250 mm) for flexible single lead probe to prevent contact with wall/nozzle.
Standard height is 3.9 in (100 mm) for probes 5A and 5B.
★
T1 Transient Protection Terminal Block (standard with FISCO options) ★
W3 2.2 lb (1 kg) weight for flexible single lead probe (5A). L=5.5 in. (140 mm) ★
Expanded
BR Mounting Bracket for 1.5 in. NPT Process Connection (RA)
W2 0.79 lb (0.36 kg) short weight for flexible single lead probe(25). L=2 in. (50 mm)
Special Configuration (Software)
Standard Standard
C1 Factory configuration (CDS required with order) ★
C4 Namur alarm and saturation levels, high alarm ★
C5 Namur alarm and saturation levels, low alarm ★
C8 Low alarm (26) (standard Rosemount alarm and saturation levels) ★
Special Certifications
Standard Standard
Q4 Calibration Data Certification ★
Q8 Material Traceability Certification per EN 10204 3.1(27) ★
QS Prior-use certificate of FMEDA Data. Only available with HART 4-20 mA output (output code H). ★
U1 WHG Overfill Approval. Only available with HART 4-20 mA output (output code H) ★
Expanded
QG GOST Primary Verification Certificate
PlantWeb Diagnostic Functionality
Standard Standard
D01 FOUNDATION fieldbus Diagnostics Suite ★
DA1 HART Diagnostics Suite ★
Centering Discs Outer Diameter
Standard Standard
S2 2 in. Centering disc(28) 1.8 in. (45 mm) ★
S3 3 in. Centering disc(28) 2.7 in. (68 mm) ★
S4 4 in. Centering disc(28) 3.6 in. (92 mm) ★
P2 2 in. Centering disc PTFE(29) 1.8 in. (45 mm) ★
P3 3 in. Centering disc PTFE(29) 2.7 in. (68 mm) ★
P4 4 in. Centering disc PTFE(29) 3.6 in. (92 mm) ★
Expanded
S6 6 in. Centering disc(28) 5.55 in. (141 mm)
S8 8 in. Centering disc(28) 7.40 in. (188 mm)
P6 6 in. Centering disc PTFE(29) 5.55 in. (141 mm)
P8 8 in. Centering disc PTFE(29) 7.40 in. (188 mm)
Remote Housing Mounting
Expanded
B1 1m / 3.2 ft. Remote Housing Mounting Cable and Bracket
B2 2m / 6.5 ft. Remote Housing Mounting Cable and Bracket
B3 3m / 9.8 ft. Remote Housing Mounting Cable and Bracket
Consolidate to Chamber
Expanded
XC Consolidate to Chamber(30)
(1) Not available with Flame/Explosion-proof approvals (E1, E3, E5, E6, E7, KA, KB, KC, and KD)
(2) Process seal rating. Final rating depends on flange and O-ring selection. See “Temperature and Pressure Limits” on page 22.
TABLE 1. 5301 and 5302 Level and/or Interface in Liquids Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
Rosemount 5300 Series
10
(3) Requires option None for sealing (no O-ring).
(4) Welding Procedure Qualification Record Documentation will be supplied.
(5) For other materials, consult the factory.
(6) Consult the factory for this option.
(7) Requires High Temperature High Pressure (code H), High Pressure (code P), or Cryogenic (code C) probe.
(8) Available in SST. Consult the factory for other materials.
(9) 0.79 lb (0.36 kg) standard weight for flexible single lead probe. L=5.5 in. (140 mm).
For PTFE covered probes: 2.2 lb (1 kg) standard weight for flexible single lead probe. L=17.1 in. (434 mm).
(10) Extra length for fastening is added in factory.
(11) Requires model 5301. 1.3 lb (0.6 kg) standard weight for twin flex lead probe. L=3.5 in. (90 mm).
(12) Only available with standard temperature and pressure (code S).
(13) This is an HTHP probe.
(14) Probe weight included if applicable. Give the total probe length in feet and inches or meters and centimeters, depending on selected probe length unit.
If tank height is unknown, please round up to an even length when ordering. Probes can be cut to exact length in field. Maximum allowable length is
determined by process conditions. See “Tank Connection and Probe” on page 31 for more probe length guidance.
(15) Available in 316L SST. For other materials consult the factory.
(16) Raised face type for SST flanges up to class 1500.
(17) Available in 316L and EN 1.4404. For other materials consult the factory.
(18) Type A flat face for SST flanges up to PN100 and type B2 raised face for SST flanges PN160 and PN250.
(19) Raised face type for SST flanges.
(20) Probes are intrinsically safe.
(21) Requires FOUNDATION fieldbus signal output (Uiparameter listed in “Product Certifications” on page 36).
(22) For standard tank connection, only available with flange.
(23) For Material SST, Alloy C-276 and Alloy 400; Probe Type 3A, 3B, 4A, 4B, 4U, and 4V.
(24) Not available with PTFE covered probes.
(25) Only for Material of Construction code 1 and 3. For other materials, consult the factory.
(26) The standard alarm setting is high.
(27) Certificate includes all pressure retaining wetted parts.
(28) Available for SST and Alloy C-276 probes, type 2A, 4A, 4B, and 5A. Same disc material as probe material. For more information, see “Centering Discs”on
page 35.
(29) Available for probe types 2A, 4A, 4B and 5A, except for HTHP.
(30) Not available for Cryogenic probe.
Example Model String: 5301-H-A-1-S-1-V-1A-M-002-05-AA-I1-M1C1. E-002-05, means 2 ft and 5 in. probe length. M-002-05, means 2.05 m.

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
11
Rosemount 5300 Series
Rosemount 5303
Level for Solids
Rosemount 5303 Guided Wave Radar Level transmitter provides industry leading
measurement capabilities and reliability on solids. Characteristics include:
• Direct Switch Technology and Probe End Projection to handle low reflective media
and long measuring ranges
• Measurement independent of dust, moisture and material fluctuations
• HART 4-20 mA, FOUNDATION fieldbus
, Modbus , or IEC 62591 (WirelessHART) with
the Smart Wireless THUM adapter
• Probes for high physical weight loads (probe type 6A and 6B)
• Long stud available to prevent contact with nozzle (LS option)
Additional Information
Specifications: page 16
Certifications: page 36
Dimensional drawings: page 39
TABLE 2. 5303 Level for Solids Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
Model Product Description
5303 Guided Wave Solids Level Transmitter
Signal Output
Standard Standard
H 4-20 mA with HART communication ★
FF
OUNDATION fieldbus ★
M RS-485 with Modbus communication ★
Housing Material
Standard Standard
A Polyurethane-covered Aluminum ★
Expanded
S Stainless Steel, Grade CF8M (ASTM A743)
Conduit / Cable Threads
Standard Standard
1 ½ - 14 NPT ★
2 M20 x 1.5 adapter ★
E M12, 4-pin, Male connector (eurofast®)(1) ★
M A size Mini, 4-pin, Male connector (minifast®)(1) ★
Operating Temperature and Pressure Probe Type
Standard Standard
S - 15 psig (-1bar) to 580 psig (40 bar) @ 302 °F (150 °C) (2) Single Lead Probes only ★
Material of Construction(3): Process Connection / Probe Probe Type
Standard Standard
1316L SST (EN 1.4404) Single Lead Probes only ★
Sealing, O-ring Material (Consult factory for other o-ring materials)
Standard Standard
VViton
®fluoroelastomer ★
E Ethylene Propylene ★

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
Rosemount 5300 Series
12
KKalrez
®6375 perfluoroelastomer ★
B Buna-N ★
Probe Type Process Connection Probe Lengths
Standard Standard
5A Flexible Single Lead with weight, 4
mm(4) Flange /
1 in., 1.5 in., 2 in.Thread Min: 3 ft 4 in. (1 m). Max: 115 ft. (35 m) ★
5B Flexible Single Lead with chuck, 4 mm(5) Flange /
1 in., 1.5 in., 2 in. Thread Min: 3 ft 4 in. (1 m). Max: 115 ft. (35 m) ★
6A Flexible Single Lead with weight, 6
mm(6) Flange /
1 in., 1.5 in., 2 in. Thread Min: 3 ft 4 in. (1 m). Max: 164 ft. (50 m) ★
6B Flexible Single Lead with chuck, 6 mm(5) Flange /
1 in., 1.5 in., 2 in. Thread Min: 3 ft 4 in. (1 m). Max: 164 ft. (50 m) ★
Probe Length Units
Standard Standard
EEnglish (feet, in.) ★
M Metric (meters, centimeters) ★
Total Probe Length (7) (feet/m)
Standard Standard
xxx 0-164 ft or 0-50 m ★
Total Probe Length (7) (in./cm)
Standard Standard
xx 0-11 in. or 0-99 cm ★
Process Connection - Size / Type (consult the factory for other process connections)
ASME / ANSI Flanges(8)
Standard Standard
AA 2 in., 150 lb ★
AB 2 in., 300 lb ★
BA 3 in., 150 lb ★
BB 3 in., 300 lb ★
CA 4 in., 150 lb ★
CB 4 in., 300 lb ★
Expanded
DA 6 in., 150 lb
EN (DIN) Flanges(9)
Standard Standard
HB DN50, PN40 ★
IA DN80, PN16 ★
IB DN80, PN40 ★
JA DN100, PN16 ★
JB DN100, PN40 ★
Expanded
KA DN150, PN16
JIS Flanges(9)
Standard Standard
UA 50A, 10K ★
VA 80A, 10K ★
XA 100A, 10K ★
TABLE 2. 5303 Level for Solids Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
13
Rosemount 5300 Series
Expanded
UB 50A, 20K
VB 80A, 20K
XB 100A, 20K
YA 150A, 10K
YB 150A, 20K
ZA 200A, 10K
ZB 200A, 20K
Threaded Connections(8) Probe Type
Standard Standard
RA 1 ½ in. NPT thread 5A, 5B, 6A, 6B, std. temp. and pressure ★
RC 2 in. NPT thread 5A, 5B, 6A, 6B, std. temp. and pressure ★
Expanded
RB 1 in. NPT thread 5A, 5B, 6A, 6B, std. temp. and pressure
SA 1 ½ in. BSP (G 1 ½ in.) thread 5A, 5B, 6A, 6B, std. temp. and pressure
SB 1 in. BSP (G 1 in.) thread 5A, 5B, 6A, 6B, std. temp. and pressure
Hazardous Locations Certifications
Standard Standard
NA No Hazardous Locations Certifications ★
E1 ATEX Flameproof ★
E3 NEPSI Flameproof ★
E5 FM Explosion-proof ★
E6 CSA Explosion-proof ★
E7 IECEx Flameproof ★
I1 ATEX Intrinsic Safety ★
IA ATEX FISCO Intrinsic Safety(10) ★
I3 NEPSI Intrinsic Safety ★
IC NEPSI FISCO Intrinsic Safety(10) ★
I5 FM Intrinsic Safety and Non-Incendive ★
IE FM FISCO Intrinsic Safety(10) ★
I6 CSA Intrinsic Safety ★
IF CSA FISCO Intrinsic Safety(10) ★
I7 IECEx Intrinsic Safety ★
IG IECEx FISCO Intrinsic Safety(10) ★
Expanded
E2 INMETRO Flameproof
I2 INMETRO Intrinsic Safety
IB INMETRO FISCO Intrinsic Safety
E4 TIIS Flameproof
KA ATEX, FM, CSA Flameproof/Explosion-proof
KB ATEX, FM, IECEx Flameproof/Explosion-proof
KC ATEX, CSA, IECEx Flameproof/Explosion-proof
KD FM, CSA, IECEx Flameproof/Explosion-proof
KE ATEX, FM, CSA Intrinsic Safety
KF ATEX, FM, IECEx Intrinsic Safety
KG ATEX, CSA, IECEx Intrinsic Safety
KH FM, CSA, IECEx Intrinsic Safety
KI FISCO - ATEX, FM, CSA Intrinsic Safety(10)
TABLE 2. 5303 Level for Solids Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
Rosemount 5300 Series
14
KJ FISCO - ATEX, FM, IECEX Intrinsic Safety (10)
KK FISCO - ATEX, CSA, IECEX Intrinsic Safety(10)
KL FISCO - FM, CSA, IECEX Intrinsic Safety(10)
Options
Standard Standard
M1 Integral digital display ★
P1 Hydrostatic testing(11) ★
LS Long stud 9.8 in (250 mm) for flexible single lead probe to prevent contact with wall/nozzle.
Standard height is 3.9 in (100 mm) for probes 5A and 5B; 5.9 in. (150 mm) for probes 6A and 6B
★
T1 Transient Protection Terminal Block (standard with FISCO options) ★
W3 2.2 lb (1 kg) weight for flexible single lead probe (5A). L=5.5 in. (140 mm) ★
Expanded
BR Mounting Bracket for 1.5 in. NPT Process Connection (RA)(12)
Special Configuration (Software)
Standard Standard
C1 Factory configuration (CDS required with order) ★
C4 Namur alarm and saturation levels, high alarm ★
C5 Namur alarm and saturation levels, low alarm ★
C8 Low alarm (13) (standard Rosemount alarm and saturation levels) ★
Special Certifications
Standard Standard
Q4 Calibration Data Certification ★
Q8 Material Traceability Certification per EN 10204 3.1(14) ★
QS Prior-use certificate of FMEDA Data. Only available with HART 4-20 mA output (output code H). ★
U1 WHG Overfill Approval. Only available with HART 4-20 mA output (output code H) ★
Expanded
QG GOST Primary Verification Certificate
PlantWeb Diagnostic Functionality
Standard Standard
D01 FOUNDATION fieldbus Diagnostics Suite ★
DA1 HART Diagnostics Suite ★
Remote Housing Mounting
Expanded
B1 1m / 3.2 ft. Remote Housing Mounting Cable and Bracket
B2 2m / 6.5 ft. Remote Housing Mounting Cable and Bracket
B3 3m / 9.8 ft. Remote Housing Mounting Cable and Bracket
(1) Not available with Flame/Explosion-proof approvals (E1, E3, E5, E6, E7, KA, KB, KC, and KD)
(2) Process seal rating. Final rating depends on flange and O-ring selection. See “Tank Connection and Probe” on page 31.
(3) For other materials, consult the factory.
(4) 0.79 lb (0.36 kg) standard weight for flexible single lead probe. L=5.5 in. (140 mm).
(5) Extra length for fastening is added in the factory.
(6) 1.2 lb (0.56 kg) standard weight for flexible single lead probe. L=5.5 in. (140 mm).
(7) Probe weight included if applicable. Give the total probe length in feet and inches or meters and centimeters, depending on selected probe length unit.
If tank height is unknown, please round up to an even length when ordering. Probes can be cut to exact length in field. Maximum allowable length is
determined by process conditions. See “Tank Connection and Probe” on page 31 for more probe length guidance.
(8) Available in 316L SST. For other materials, consult the factory.
(9) Available in 316L and EN 1.4404. For other materials consult the factory.
(10) Requires FOUNDATION fieldbus signal output (Uiparameter listed in “Product Certifications” on page 36).
(11) Available for flanged connection.
(12) Only for Standard Temperature and Pressure.
(13) The standard alarm setting is high.
(14) Certificate includes all pressure retaining wetted parts.
Example Model String: 5303-H-A-1-S-1-V-6A-M-025-50-AA-I1-M1C1. E-025-05, means 25 ft and 5 in. probe length. M-025-50, means 25.5 m.
TABLE 2. 5303 Level for Solids Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
15
Rosemount 5300 Series
ACCESSORIES
TABLE 3. Accessories Ordering Information
Process Connection - Size/Type (consult the factory for other process connections)
Centering discs(1) (2) Outer Diameter
Standard Standard
03300-1655-0001 Kit, 2-in. Centering Disk, SST, Rigid Single 1.8 in. (45 mm) ★
03300-1655-0002 Kit, 3-in. Centering Disk, SST, Rigid Single 2.7 in. (68 mm) ★
03300-1655-0003 Kit, 4-in. Centering Disk, SST, Rigid Single 3.6 in. (92 mm) ★
03300-1655-0006 Kit, 2-in. Centering Disk, PTFE, Rigid Single 1.8 in. (45 mm) ★
03300-1655-0007 Kit, 3-in. Centering Disk, PTFE, Rigid Single 2.7 in. (68 mm) ★
03300-1655-0008 Kit, 4-in. Centering Disk, PTFE, Rigid Single 3.6 in. (92 mm) ★
03300-1655-1001 Kit, 2-in. Centering Disk, SST, Single / Twin Flex Lead 1.8 in. (45 mm) ★
03300-1655-1002 Kit, 3-in. Centering Disk, SST, Single / Twin Flex Lead 2.7 in. (68 mm) ★
03300-1655-1003 Kit, 4-in. Centering Disk, SST, Single / Twin Flex Lead 3.6 in. (92 mm) ★
03300-1655-1006 Kit, 2-in. Centering Disk, PTFE, Single / Twin Flex Lead 1.8 in. (45 mm) ★
03300-1655-1007 Kit, 3-in. Centering Disk, PTFE, Single / Twin Flex Lead 2.7 in. (68 mm) ★
03300-1655-1008 Kit, 4-in. Centering Disk, PTFE, Single / Twin Flex Lead 3.6 in. (92 mm) ★
Expanded
03300-1655-0004 Kit, 6-in. Centering Disk, SST, Rigid Single 5.55 in. (141 mm)
03300-1655-0005 Kit, 8-in. Centering Disk, SST, Rigid Single 7.40 in. (188 mm)
03300-1655-0009 Kit, 6-in. Centering Disk, PTFE, Rigid Single 5.55 in. (141 mm)
03300-1655-0010 Kit, 8-in. Centering Disk, PTFE, Rigid Single 7.40 in. (188 mm)
03300-1655-1004 Kit, 6-in. Centering Disk, SST, Single / Twin Flex Lead 5.55 in. (141 mm)
03300-1655-1005 Kit, 8-in. Centering Disk, SST, Single / Twin Flex Lead 7.40 in. (188 mm)
03300-1655-1009 Kit, 6-in. Centering Disk, PTFE, Single / Twin Flex Lead 5.55 in. (141 mm)
03300-1655-1010 Kit, 8-in. Centering Disk, PTFE, Single / Twin Flex Lead 7.40 in. (188 mm)
Vented Flanges(3)
Expanded
03300-1812-9001 Fisher 249B
03300-1812-9002 Fisher 249C
03300-1812-9003 Masoneilan
Flushing Connection Rings
DP0002-2111-S6 2 in. ANSI, ¼ in. NPT connection
DP0002-3111-S6 3 in. ANSI, ¼ in. NPT connection
DP0002-4111-S6 4 in. ANSI, ¼ in. NPT connection
DP0002-5111-S6 DN50, ¼ in. NPT connection
DP0002-8111-S6 DN80, ¼ in. NPT connection
Other
Standard Standard
03300-7004-0001 Viator HART Modem and cables (RS232 connection) ★
03300-7004-0002 Viator HART Modem and cables (USB connection) ★
(1) If a centering disc is required for a flanged probe, the centering disc can be ordered with options Sx or Px on page 9 in the model code. If a centering disc
is required for a threaded connection, or as a spare part, it should be ordered using the item numbers listed below.
(2) To order a centering disc in a different material consult the factory.
(3) 1½ in. NPT threaded connection (RA) is required.

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
Rosemount 5300 Series
16
Functional Specification
General
Field of Application Liquids and semi-liquids level and/or liquid/liquid interfaces or solids level
• Model 5301, for liquid level or submerged interface measurements
• Model 5302, for liquid level and interface measurements
• Model 5303, for solid level measurements
Measurement Principle Time Domain Reflectometry (TDR)
(See “Measurement Principle” on page 2 for a description of how it works)
Microwave Output Power Nominal 300 µW, Max. 45 mW
Telecommunication (FCC and
R&TTE) FCC part 15 (1998) subpart B and R&TTE (EU directive 99/5/EC). Considered to be an unintentional radiator under the Part 15 rules
Humidity 0 - 100% Relative Humidity
Start-up Time < 40 s
Internal Power Consumption < 50 mW in normal operation
4-20 mA HART (Output Option Code H) - (See Ordering Information in Table 1 on page 4 and Table 2 on page 11)
Output Two-wire, 4–20 mA. Digital process variable is superimposed on 4–20 mA signal, and available to
any host that conforms to the HART protocol. The HART signal can be used in a multidrop mode.
Signal Wiring Recommended output cabling is twisted shielded pairs, 18-12 AWG
HART Tri-loop By sending the digital HART signal to the optional HART Tri-loop, it is possible to
have up to three additional 4–20 mA analog signals. See the Rosemount 333
HART Tri-loop Product Data Sheet (Document No. 00813-0100-4754) for
additional information
Smart Wireless THUM Adapter The optional Smart Wireless THUM adapter can be mounted directly on the
transmitter or by using a remote mounting kit. IEC 62591 (WirelessHART) enables
access to multi-variable data and diagnostics, and adds wireless to almost any
measurement point. See the Rosemount Smart Wireless THUM adapter Product
Data Sheet (Document No. 00813-0100-4075) and Smart Wireless THUM Adapter
for Rosemount Process Level Transmitter Applications (Document No.
00840-0100-4026)
Rosemount 5300
Series Transmitter
Rosemount 751
Field Signal
Indicator Rosemount
333 HART
Tri-loop
3 x 4-20 mA
Control
System
4-20 mA / HART
Field Communicator
PC with Rosemount
Radar Master
HART
Modem

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
17
Rosemount 5300 Series
External Power Supply(1)
R = Load Resistance (); UE= External Power Supply Voltage (Vdc); UI = Input Voltage (Vdc)
Minimum Input Voltage (UI) at
Different Currents Current: 3.75 mA Non-Hazardous Installations and Intrinsically Safe Installations: 16 Vdc
Explosion-proof / Flameproof Installations: 20 Vdc
Current: 21.75 mA
Non-Hazardous Installations and Intrinsically Safe Installations: 11 Vdc
Explosion-proof / Flameproof Installations: 15.5 Vdc
IS Parameters See “Product Certifications” on page 36
Signal on Alarm Standard: Low = 3.75 mA, High = 21.75 mA
Namur NE43: Low = 3.60 mA, High = 22.50 mA
Saturation Levels Standard: Low = 3.9 mA, High = 20.8 mA
Namur NE43: Low = 3.8 mA, High = 20.5 mA
The input voltage (UI) for HART is 16-42.4 Vdc
(16-30 Vdc in IS applications, and 20-42.4 Vdc
in Explosion-proof / Flameproof applications).
For Flameproof/Explosion-proof installations the
Rosemount 5300 Series transmitters have a
built-in barrier; no external barrier needed.
When a Smart Wireless THUM adapter is fitted,
it adds a maximum drop of 2.5 Vdc in the
connected loop
RUE
UI

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
Rosemount 5300 Series
18
Load Limitations Maximum load resistance is determined by the voltage level of the external power supply, as
described by:
Non-Hazardous Installations
Maximum Load Resistance
Operating
Region External Power
Supply Voltage
Intrinsically Safe Installations
Operating
Region
Maximum Load Resistance
External Power
Supply Voltage
Explosion-proof / Flameproof (EEx d) Installations
Maximum Load Resistance
External Power
Supply Voltage
Operating
Region
NOTE
For the EEx d case, the diagram is only valid if the HART®load resistance is at the + side and
if the - side is grounded, otherwise the load resistance value is limited to 435 .

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
19
Rosemount 5300 Series
FOUNDATION™ fieldbus (Output Option Code F) - (See Ordering Information in Table 1 on page 4 and
Table 2 on page 11)
Output
External Power Supply(1) The input voltage for FOUNDATION™ fieldbus is 9-32 Vdc (9-30 Vdc in IS applications, and 16-32 Vdc
in Explosion-proof/Flameproof applications)
The input voltage for FISCO, IS applications is 9-17.5 Vdc
For Flameproof/Explosion-proof installations the Rosemount 5300 Series transmitters have a built-in
barrier; no external barrier needed.
Quiescent Current Draw 21 mA
FOUNDATION fieldbus Blocks Resource block, 3 Transducer blocks, 6 AI blocks, PID block, ISEL block, SGCR block, ARTH block,
and OS block
FOUNDATION fieldbus Class (Basic
or Link Master) Link Master (LAS)
FOUNDATION fieldbus Block
Execution Time AI-block: 30 ms. PID-block: 40 ms ARTH-, ISEL-, OSPL-block: 65 ms. CHAR-block: 75 ms
FOUNDATION fieldbus Instantiation No
Conforming FOUNDATION fieldbus ITK 5.0
FOUNDATION fieldbus PlantWeb
Alert Support Yes
FOUNDATION™
fieldbus
Host / DCS system (e.g. DeltaV™)Maintenance
H2 - High Speed
Field Bus
H1 - Low Speed
Field Bus
Field
Communicator
Rosemount 5301
6200 ft (1900 m)
max (depending
upon cable
characteristics)
Rosemount 5401 Rosemount 5601
PC with Rosemount
Radar Master
Fieldbus
Modem
Rosemount 752
Field Signal
Indicator

Product Data Sheet
00813-0100-4530, Rev DA
December 2010
Rosemount 5300 Series
20
Modbus (Output Option Code M) - (See Ordering Information in Table 1 on page 4 and Table 2 on page 11)
Output The RS-485 Modbus version communicates by Modbus RTU, Modbus ASCII, and Levelmaster
protocols.
8 data bits, 1 start bit, 1 stop bit, and software selectable parity.
Baud Rate: 1200, 2400, 4800, 9600 (default), and 19200 bits/s.
Address Range: 1 to 255 (default device address is 246).
HART communication is used for configuration via the HART terminals or tunneling via the RS-485.
External Power Supply(1) The input voltage Uifor Modbus is 8-30 Vdc (max. rating)
Power Consumption:
< 0.5 W (with HART address=1)
< 1.2 W (incl. four HART slaves)
For Flameproof/Explosion-proof installations the Rosemount 5300 Series transmitters have a built-in
barrier; no external barrier needed.
Rosemount 5300
Series Transmitter
HART
Modem
Power
Modbus, Levelmaster
Emulation / RS-485 Control
System
RS-232 / RS-485
Converter
Field Communicator PC
5300 Setup in
Rosemount Radar
Master
PC
5300 Setup in
Rosemount Radar
Master via Tunneling
MODBUS
POWER
HART
(RS-485)
HART to Modbus Converter
MB MA -
-
+
+
Ambients > 60 ºC
Use wiring rated
for min 90 ºC
Power
Supply
RS-485 Bus
MODBUS
(RS-485)
v
erter
MB MA
-
120120
A
B
HART -
HART +
If it is the last
transmitter on the
bus, connect the
120termination
resistor.