Emos GoSmart IP-700A User manual
GB | 1
H4010
GB | IP-700A GoSmart 7" Video Door Phone Set
Contents
Safety Instructions and Warnings.....................................................................................2
Package Contents .............................................................................................................3
Technical Specications....................................................................................................3
Device Description.............................................................................................................4
Installing the Device ..........................................................................................................6
Installing the Application ................................................................................................10
Controls and Functions ...................................................................................................15
Advanced Connection Options.........................................................................................21
Troubleshooting FAQ........................................................................................................30
GB | 2
Safety Instructions and Warnings
Read the user manual before using the device.
Follow the safety instructions stated in the manual.
Do not place heavy objects onto the device.
Do not clean the exterior of the device using water or chemicals. Always use a dry cloth to avoid mechanical
damage or injury by electric current.
Do not plug the power cable into the socket with wet or moist hands; risk of injury by electric current.
Do not disassemble, repair or modify the device yourself. Doing so may cause a re, injury by electric current
or permanent damage.
EMOS spol. s r.o. hereby declares that radio device type H4010 complies with directive 2014/53/EU. The full
wording of the EU declaration of conformity is available at http://www.emos.eu/download.
The device can be operated on the basis of general authorization no. VO-R/10/07.2021-8, as amended.
GB | 3
Package Contents
Indoor monitor
Monitor mount
Camera unit
Power supply
Fasteners – screws
Manual
Technical Specications
Screen: 7" IPS
Resolution: 1080p/960p/720p/480p
Video formats: AHD/CVI/TVI/CVBS
Lens angle: 160°
Storage: SD card (max. 128 Gb, min. Class 10,
FAT32), option to expand with cloud storage
directly in the EMOS GoSmart app
Enclosure rating: IP55
APP: EMOS GoSmart for Android and iOS
Connection: 2.4 GHz WIFI (IEEE802.11b/g/n)
GB | 4
1
3
2
Device Description
Description of the Indoor Unit
1 – Microphone
2 – IPS screen
3 – slot for SD card
4 – Speaker
5 – Anchor points
6 – Gate controls
7 – Power supply
8 – Door unit – Entrance 1
9 – External CCTV camera 1
10 – Input from the previous monitor
11 – Door unit – Entrance 2
12 – External CCTV camera 2
13 – Output for the next monitor
4
5
8
6
11 13
12
7
9
10
16
2
7
3
8
4
5
Description of the Outdoor Unit
1 – Microphone
2 – Lens
3 – IR illumination
4 – Speaker
5 – Ring button
6 – Video mode selector
Hold the button for 5 s to switch video
modes*. (1080P/720P/CVBS)
7 – Button for setting the duration (1–10 s)
for opening the door lock
8 – Volume setting for the camera unit
*If you would like to use an older type of monitor
with max. resolution of 720p, you need to use this
button to change the quality of the output from the
outdoor unit. Otherwise, your monitor will either
not display video at all or the image will be cropped.
GB | 5
EXIT
×
12 V DC
ALARM
1
1
5
6
7
8
2
2
3
3
4
4
Description of Wiring
Door Camera Unit
1 – Red – 12 V
2 – White – audio
3 – Black – GND
4 – Yellow – video
5 – Green – normally closed (NC) relay contact
6 – Blue – common (COM) relay contact
7 – Brown – normally open (NO) relay contact
8 – Orange – push to exit button (triggered via the GND terminal)
The cables plug into slot DOOR1 or DOOR2.
External CCTV Camera
1 – Red – 12 V
2 – White – alarm
3 – Black – GND
4 – Yellow – video
The cables must be plugged into slot CAM1 or CAM2.
GB | 6
plastic stent cables
150–160 cm
Installing the Device
Installing the Monitor
1. Place the mount onto the chosen installation spot.
2. Drill holes to fasten the mount to the wall. Gently press the monitor to the frame so that the protrusions
lock into the opening on the back of the monitor. Pushing the monitor slightly downwards will x it in place.
Recommendation: Cable management will be easier if you install junction box A9457 (common number of
the product on the EMOS website).
Attention:
• Please install at a distance from devices emitting intense radiation: TV, DVR…
• Do not disassemble the device yourself; risk of injury by electric current.
• Be careful not to drop the device, shake it or knock it; you might damage the interior components.
• Choose the best position for installation; optimal mounting height is 150–160 cm.
• Turn o power before installing.
• Mount the device at a minimum distance of 30 cm from 230 V cabling, otherwise, there might be audio
and video distortion caused by the 50 Hz power line frequency.
• Mount away from water, magnetic elds and chemicals.
GB | 7
150–160 cm
Installing the Indoor Unit
1. Choose a suitable mounting spot and attach the mounting frame.
2. Pull the power supply cable through the mounting opening and connect it to the terminal on the back of
the door camera unit.
3. Mount the connected door camera unit onto the mounting frame using the enclosed screws.
4. Apply a layer of silicone between the wall and the door camera unit to prevent ingress of humidity under
the door camera unit. The silicone should be applied on the top and the sides. The bottom side must be
left open to allow humid air to exit the space under the door camera unit.
GB | 8
1
2
Setting Volume and Unlock Duration
1 – Button for setting the duration (1–10 s)
for opening the door lock
2 – Setting Volume for the Camera Unit
• If you nd the door unlock time unsuitable and
would like to extend or shorten it, you can do
so using the potentiometer hidden on the back
of the outdoor unit under a rubber insert. Use
a very thin screwdriver to CAREFULLY turn the
potentiometer right or left.
• Right = increase unlock time
• Left = reduce unlock time
• You can use the same method to adjust the
volume of the outdoor unit using the potenti-
ometer at the bottom.
GB | 9
DC12V DC12V
AUDIO AUDIO
GND GND
VIDEO VIDEO
power
audio
GND
video
EXIT
Connecting Cabling
When using a CAT5 or CAT6 network cable, the eective distance from the outdoor camera to the farthest
outdoor monitor will be limited. If using an unshielded network cable, the maximum distance is 20 m. For a
shielded network cable, the maximum distance is 40 m.
A CAT5 or CAT6 network cable consists of 4 twisted pairs (8 wires); here, one pair of twisted wires will be
used as one cable. Green/White+Green, Brown/White+Brown, Orange/White+Orange, Blue/White+Blue. If you
want to extend the distance to more than 60 m, it is best to use a shielded cable with a thick copper core.
Connect the shielding on both ends to the GND terminal (Black conductor).
For longer distances, we recommend using a SYKFY cable.
It is recommended to always place the cable used for communication between the outdoor camera unit and
the indoor monitor in a PVC cable duct. The connecting cable must never lead alongside power lines or pass
through the power section of the electrical cabinet.
GB | 10
Installing the Application
Starting the System – EZ mode
Step 1:
Device ID is an important part of conguring the device in the system. Without the correct ID conguration
the device will not work properly. If the current MASTER device is connected to outdoor unit 1, its ID must
be set as 1 and the other SLAVE monitors must be set to 2/3/4/5/6 in order for everything to work correctly.
GB | 11
Step 2:
The input video signal must be set correctly, otherwise the image will not display properly. If you are using the
original outdoor unit included with the main unit, leave the signal mode set to PAL and its type set to AHD1080.
If you are using a dierent device or are unsure about resolution, you can use the automatic detection feature.
You can tell that the signal type and mode has been set incorrectly if the video image is blurry/incomplete/
cropped, or does not display at all.
Step 3:
GB | 12
Steps on the phone
1 2 3 4
5 6 7 8
9
GB | 13
Starting the System – AP Mode
If you have been unsuccessful in pairing the device using EZ mode, you can also pair it using AP mode. In AP
mode, the device creates its own Wi-Fi hotspot, which you can then connect to using your phone and pair
the device that way.
Repeat steps 1 and 2 like when pairing using EZ mode, then switch mode from EZ to AP in step 3. After setting
AP mode, restart the device. The system will restart after you click the conrmation icon .
GB | 15
1 2 3
4
5
6
7
Controls and Functions
Description of Icons on the Home Screen
1 – Motion detection on individual channels
Red colour indicates that detection is active; if the icon is grey, it means the motion detection is turned
o for the camera.
2 – Switching modes:
„Home“ – Normal operation. Notications are also sent to the phone.
„Away“ – Visitors can record a video message. It will then also be sent to the phone.
„Do not disturb“ – The indoor and outdoor unit will not ring, a notication will be sent to the phone.
3 – Network connection status indicator
4 – Call records
5 – Files with message records
6 – Motion detection records
7 – Alarm records
GB | 16
Description of Icons in the Application
Channel switching
Mute
Zoom
Fullscreen mode
Take pictures using the app and save them in
the mobile album
Speak
Capture video using the app and save it in the
mobile album
Play video stored on the SD card
View videos and photos taken through the app
Light mode / dark mode
Open the lock
Cloud service for saving videos from calls and
videos from motion detection
GB | 17
Advanced Device Settings in the App
You can view additional setting options by tapping the 3 dots in the top right corner.
• Device information – Basic information about the device and its owner
• Tap-to-Run and Automation – View scenes and automations assigned to the
device. Scenes can be created directly in the app‘s main menu in the Scenes
section. For H4010 you can, for instance, create automation that will reduce
the sensitivity of the camera unit‘s motion detection from 18:00 to 7:00.
• Basic Function Settings – Option to turn on/o basic functions of the device
such as status indicator, automatic screen rotation or watermark with time
and date.
• Detection Alarm Settings – Settings for alarm sensitivity.
• Storage Settings – Shows space remaining on the SD card and its formatting
options
• Cloud Storage – Option to buy cloud IPC storage for alarm recordings.
• Oine Notication – The app will send a notication in case the indoor monitor
encounters issues with connection to the network.
• FAQ & Feedback – Shows frequently asked questions and their solutions and
provides the option to send us question/suggestion/feedback directly
• Share Device – Option for sharing the device with another user.
• Add to Home Screen – Adds an icon to the home screen of your phone. That
way, you no longer need to open the device through the app; you simply tap
the newly added icon, and you will be redirected straight to the camera view.
• Device update – Update the device. Option to turn on automatic updates.
• Restart Device – Restart the device.
• Remove Device – Remove and unpair the device. An important step if you wish
to change the owner of the device. Once the device is added to the app, the
device is paired with the account in the app and cannot be added to another
account without unpairing.
GB | 18
Description of Icons in the Application during a Call
These icons are used if you answer a call to the device through your phone.
End the call
Answer the call
If you wish to unlock the gate or door without having to answer the call, slide
your nger up in the menu. You will see 2 additional icons which will allow you
to unlock the door or gate.
Unlock the gate
Unlock the door
The next screen appears after answering a call.
Voice changer – Safety feature. If you’re in a situation where you do not want to
answer a call using your normal voice, you can use the voice changer to change
your voice to female/male/ltered...
Voice changer
End the call
GB | 19
Main Menu Styles
Here you can choose from 3 dierent graphical styles for the monitor’s main menu.
Android menu:
Standard menu:
Windows menu:
GB | 20
Description of Main Menu Icons
System settings
Settings for device parameters (E.g. gate unlock duration)
Ringtone settings
Play back recordings
Play multi-media les
Intercom
Unlock the door
"Home" mode
"Away" mode
"Do not disturb" mode
Outdoor camera unit
Security camera
Intercom Function
The intercom function allows you to communicate between interconnected indoor units.
Simply tap the intercom icon in the menu and select which indoor unit you wish to communicate with.
Table of contents
Other Emos Intercom System manuals
