Enabling Devices 783R User manual

For Technical Support:
For Technical Support:For Technical Support:
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST
1-800-832-8697
[e-mail]
Mini Gum Ball Switches #783R, B, G, Y, P
USER’S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablingdevices.com

The Mini-Gumball switch is versatile and durable. It has a 1¼ inch
activation surface. This switch is small enough to be easily mounted
anywhere. Base has three holes for easy mounting. It provides tactile
and audible feedback. Mounting plate is removable. Size: 2"Base x
½"H. Weight: 1 oz.
Operation:
Operation:Operation:
Operation:
1. The Mini Gum Ball Switch does not
notnot
not require any batteries to
operate. The base is removable if desired. To remove the base
turn the switch over and unscrew the two Phillips Head screws.
Next pull the base ring off the switch. After the base has been
removed you can place the included piece of non skid rubber, to
give the switch a firm grip on smooth surfaces.
2. Plug the Mini Gum Ball Switch into the jack on your switch-
adapted toy/device.
4. If it is necessary for you to use an adapter, make sure that you use
a MONO adapter, not a STEREO adapter.
5. Make sure that the connection between the Mini Gum Ball Switch
and your toy/device is tight. There should be no gaps.
6. Simply press anywhere on the Mini Gum Ball Switch’s colored top
to activate your toy/device.
7. The toy/device will only remain activated while the Mini Gum Ball
Switch continues to be actuated. Once you release the switch, the
toy/device will turn off.
Troubleshooting:
Troubleshooting:Troubleshooting:
Troubleshooting:
Problem:
Problem: Problem:
Problem: The Mini Gum Ball Switch does not activate your
toy/device.
Action #1:
Action #1: Action #1:
Action #1: Make sure that the connection between the Mini Gum Ball
Switch and your toy/device is tight. There should be no
no no
no gaps. This is a
common error and an easy fix.
Action #2:
Action #2: Action #2:
Action #2: Try a different switch with your toy/device to rule out the
toy/device as the source of the problem.
Action #3:
Action #3: Action #3:
Action #3: Try a different adapter (if applicable to rule this out as the
source of the problem.
Care of Unit:
Care of Unit:Care of Unit:
Care of Unit:
The Gum Ball Switch can be wiped clean with any household multi-
purpose cleaner and disinfectant. We recommend Simple Green,
which is a non toxic biodegradable all-purpose cleaner.
Do not submerge
Do not submergeDo not submerge
Do not submerge the unit, as it will damage the contents and the
electrical components.
Do not use abrasive cleaners,
Do not use abrasive cleaners,Do not use abrasive cleaners,
Do not use abrasive cleaners, as they will scratch the surface of the
unit.
Rev
Rev Rev
Rev 2
22
2/14
/14/14
/14/1
/1/1
/17
77
7